Condition: good (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: V001257, Profi-Joint Shaper 6000mm two stage press Includes PUR glue pump and applicator Cob Hsv Ryb Rocpu Nsgt Additional consideration: Sawdust extraction (A$20,000)

Condition: good (used), The AccuPlace Model 3065 is a film adhesive and label applicator, designed to place items of maximum dimension 76 mm x 165 mm with high accuracy and reproducibility. Notes - Csbjvm Epfs Hcpu Nsgt 1. 8 Nos. available 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, Year of construction: 2003, grinding wheel diameter: 400 mm, helix angle: 45 °, Used Höfler Rapid 1500, built in 2003 Mahr measuring system Interlit oil preparation system Location: Australia Cgjb Hcpjv U D Tfou Net

Condition: refurbished (used), Year of construction: 2003, operating hours: 24,000 h, Functionality: limited functionality, bending radius: 300 mm, bending angle: 183 °, wall thickness: 8 mm, pipe diameter: 100 mm, pipe length: 4,100 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR Ceb Hcpotrd T Tou Negt 48.3mm 120mm CLR

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand SIEMENS Main Drive Spindle speed range 14000 rpm Number of axis 5 Movement X-Axis Movement 650mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm C-Axis Movement 360º Cgjbjvl I S Te Hcpu Nst This 5-axis DMG Mori Seiki LaserTech 65 was manufactured in 2013. A universal machining centre featuring a spindle speed of 14,000 rpm, SIEMENS control, and a travel range of 735 mm x 650 mm x 560 mm. It offers a full rotation range on the C-axis and a swiveling range on the A-axis of +120°/-120°. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki LaserTech 65 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1991, Accessories: 1)Ladle 2)Sprayer Specifications: Locking Force: 650 tons Distance Between Tie Bars (W × H): 750 × 750 mm (29.5" × 29.5") Tie Bar Diameter: 160 mm (6.3") Stationary Platen (W × H): 480 × 1290 mm (18.9" × 50.8") Movable Platen (W × H): 480 × 1200 mm (18.9" × 47.2") Back Platen (W × H): 650 × 1200 mm (25.6" × 47.2") Die Height (Min-Max): 350 - 900 mm (13.8" - 35.4") Die Stroke: 550 mm (21.7") Die Injection Force (Min-Max): 25 - 52 tons Injection Speed: 0.1 - 5 m/sec (3.9 inch) Shot Position (below center): 0 - 175 mm (0" - 6.9") Plunger Stroke: 500 mm (19.7") Cebjum Rd De Hcpu Njgt Plunger Tip Diameter: 75 - 95 mm (3" - 3.7") Ejection Force: 25 tons Ejection Stroke: 125 - 0 mm (4.9" - 0") Dry Cycle Speed (max, load): 4.5 sec

Condition: used, Year of construction: 2012, CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 1400 run hours ! Available immediately. Cjbec S S Spj Hcpu Njgt

Condition: good (used), Year of construction: 2021, operating hours: 2,109 h, Functionality: limited functionality, 160t clamp tonnage, 35mm main barrel with 150ccm shot volume, 15mm secondary barrel with 15ccm shot volume, 16 hot runner zones, 4+4 shut off nozzle valves, servo driven swivel unit on moving half. Comes with Eunil Magazine Loader and Viper 12-RC300 robot Notes - 1. Two machines available for sale 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Csb Hjvmuliecpu Nogt Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: new, Year of construction: 2025, Functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Cob Hsgb Ec Hjcpu Negt Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, CNC LATHE Mori Seiki NL1500Y/500 Cgeb Hcjwgvy Tepu Net MELDAS-720BM-A 6"chuck Max turning dia:386 Length:515mm X260 Y:-50 +50 Z:590mm thru spindle 6,000rpm 12 stations

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,572 h, General Data Cjbowb Ilwe Hcpu Negt Machine weight 5000 Main Drive Spindle speed range 1000 Additional Equipment Cucchi Giovanni DBM.821 (2009) loader included This Schütte SG18 multi-spindle turning machine was manufactured in 2009. It features a largest rod diameter of 18mm, spindle circle diameter of 180mm, and bar feed of 60mm. Includes a Cucchi Giovanni DBM.821 loader. With a total weight of approximately 5000kg and a spindle speed max of 1000 1/min, the Schütte SG18 machine we have for sale is robust. Contact us for further details regarding this multi-spindle turning machine. Application Types Turning

Condition: good (used), Year of construction: 2006, X Axis Travel: 850 mm Cgobswhcxfj Hcpu Net Y Axis Travel: 550 mm Z Axis Travel: 580 mm Distance from Table Surface to Spindle Nose: 120–700 mm Table Area: 1020 × 550 mm Max. Load of Table: 600 kg Fanuc : Oi-MC

Condition: good (used), Year of construction: 2021, operating hours: 1,960 h, Functionality: limited functionality, overall weight: 198 kg, total length: 1,750 mm, total width: 1,065 mm, total height: 2,290 mm, The hydration chambers system comprises four separate and independently controlled, sealed chambers, all of which are controlled by a single Eurotherm T2750 programmable automation controller and Eurotherm Eycon20 Visual Supervisor. The software used for programming both the T2750 and Eycon20 is LIN tools, a multi-purpose Windows-based package for use both off-line and on-line. Operation Manual, Technical details and electrical drawings available upon Request Cjb Hcpuevmi A Ae Njgt Notes - 1. 2 units available 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 1994, MAX TURNING DIAMETER-340MM MAX TURNING LENGTH-530MM SWING-520MM DISTANCE BETWEEN CENTERS-625MM CHUCK EQUIPPED-200MM GUIDEWAYS-BOX MAX ROTATION SPEED-3500 RPM Cgob Hcpusurqm Nj Not SPINDLE NOSE-A2-6 SPINDLE BORE-78MM TAILSTOCK-YES

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, The S2-900 provides exceptional dispensing accuracy and repeatability, and is ideal for high-volume manufacturing. The S2-900 dispenses precise small dots and consistent thin lines, coats and underfills in hard-to-reach areas, has a small footprint that maximizes floor-space, and increases throughput. The S2-900 performs with a wide range of fluids, processes, and substrates and easily integrates with jets and valves from Nordson ASYMTEK. Manual available upon request Note - 1. This is a pair of units with a custom conveyor system used to transfer cartridges between 2 systems. 2. 1 Used and 1 unused pair available 3. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. Cjb Hcpuovm E Nrj Nsgt The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2016, Controller - Fanuc Solution C Travel-x - 860 Travel-y - 550 Travel-z - 550 mm Working Area - 950 x 550 mm Taper - Bt40 ATC-0 - 24 Direct type - spindle type RPM - 12000 Linear - guide way Weight - 5400 Kg Cgob Howgbqwjcpu Njt

Condition: as good as new (ex-display), Year of construction: 2020, Modular high throughput printing device with environmental control (single cell only) with 4 liquid channels with the ability to scale to 8 liquid channels that deliver reagents ability to deliver 10pl to 800pl in a single drop depending on the Piezo dispense capillary (consumable) used. The unit offers consistent and highly reproducible reagent delivery with a mechanical precision of the gantry movement is less than 3 µm, and the spot positioning accuracy is typically less than 6 µm. Notes - 1. Scienion will be needed to complete setup/programming IP of resonators still on the equipment (find resonator image) 2. 2 Units available for sale - 1 used; 1 unused 3. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer Csb Hcpusvmktpe Nogt The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2006, Swing - 370.84 mm Chuck Size - 203.2 mm Bar Capacity - 1.7 mm Cgjb Hcswgbqdopu Net Power - 12 W Max RPM - 4,800 RPM Tailstock - Yes

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, Functionality: limited functionality, machine/vehicle number: 3201, total length: 3,251 mm, total height: 1,626 mm, total width: 1,168 mm, overall weight: 1,200 kg, The Fuji FW3400CXII/B horizontal flow wrapper is an advanced packaging machine designed for efficient and high-speed wrapping of various products. It uses a single roll of film to encase products, with top film feed and adjustable formers for flexibility. The machine features induction heated sealing rollers for precise temperature control and energy efficiency, along with box-motion end sealers to accommodate a range of product sizes. Capable of up to 300 packs per minute, it ensures consistent, reliable packaging with easy operation via a user-friendly HMI. Ideal for food, pharmaceutical, and other industries, it provides robust, hygienic wrapping solutions. Manual available upon request. Note - Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. Csb Hjvmcghjcpu Njgt No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 1995, Turning length - 600 mm Turning Ø - 250 mm Ø above the bed - 250 mm Length between centers - 475 mm X-axis - 140 mm Z-axis - 640 mm Max workpiece weight - 3000 kg Spindle bore - 53 mm Number of turrets - 12 Turning speed - 5000 rpm Spindle motor power - 5.5 kW Tailstock - no Bar feeder - no Weight - 2800 kg Length x width x height 1890.0 × 1600.0 × 2065.0 *2 units available Cgeb Hcpuewgbm Ej Not

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, 6-axis articulated Robot & Controller - 9 units available Max Reach: 650mm Max Payload: 5kg Csb Hcpevzv N Eou Nogt Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2006, Table size - 900x470mm T shaped groove - 18x4x100mm Table load - 500kg Cgob Hcjv Swyyopu Njt X axis stroke - 800mm Y axis stroke - 510mm Z axis stroke - 630mm Distance between spindle nose and table - 75-705mm Spindle speed - 8000rpm Tool type - BT40 Main motor power - 7.5/10kw Machine weight - 5800kg Outline dimension - 2360x2400x2890mm System - Fanuc

Condition: good (used), Year of construction: 2019, operating hours: 1,960 h, machine/vehicle number: 594-02462, 4-axis Scara Robot & Controller Max Reach: 600mm Max Payload: 5.5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Max Current: 10Amp Short Circuit Rating: 1.5kA Cobovzv Hqo Hcpu Nsgt Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Year of construction: 2020, operating hours: 1,960 h, Condition: good (used), Functionality: limited functionality, Precision Weighing Modules - 22 units available Max Capacity: 220g Readability: 0.1mg Interface: EtherNet/IP, TCP/IP Dimensions(LxHxW): 200mm x 100mm x 25mm Power: Power Over Ethernet Configuration Software: APW-Link Version2.7.2 Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods. Cgeb Hsvzl A Uecpu Nst

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, Functionality: limited functionality, machine/vehicle number: P10642-A, Enmin electromagnetic vibratory bowl feeder - 2 units available Voltage: 1Phase 240VAC Cgebjvzlu Do Hcpu Nst Frequency: 50Hz Full load current: 2Amp Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.