Condition: used, Year of construction: 2008, Functionality: fully functional, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, outer dimension length: 4,500 mm, outer dimension width: 7,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Belnsvtdzto Nrddowl

Year of construction: 2023, Condition: like new (used), Functionality: fully functional, 4 axis stone CNC machine for edge finishing/ tap and sink holes - fits BT40ER40/80 - 15 tool holders included - vacuum pump included - including automatic zero point determination via compressed air cylinders - excluding water installation - control cabinet dimensions 900x600x1800 mm Beln Nrjv Dulqeddjwl

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: DAMP, DAMP is a special satellite head with places for abrasive tools, used for grinding/calibrating tiles of different sizes. It consists of a rotating housing made of ductile iron, equipped with 6 grinding stones, which are fixed to special corrosion-resistant supports. The internal gears, bearings and all other mechanisms are immersed in an oil bath, with durable, heat-resistant seals. A motor drive provides the working power. The fixed flange only has to withstand the torque reaction, without the need for rigid attachment to the machine body. A special internal vibration damping system distinguishes these heads, which evenly polishes the tile, even when the surface is particularly curved. In addition, the shafts can be tilted away from the head's axis of rotation to make it easier for the grinding stone to remove and finish the material during the process. DAMP technical data Number of satellites no. 6 Maximum power kW 15 Bwsln Nrdev D N A Dodjl Min. head rotation speed rpm 400 Maximum head rotation speed rpm 600 Maximum grinding stone diameter mm 150 Amount of grease l 9.3/9.2 Weight with grease Kg 100/102 Maximum calibration diameter mm 460 Condition: like new, manufactured 2016/2017. Price for a new one approx. 3,500€.

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. Boln Nrdeq Nf Uwjdjwl 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Year of construction: 2013, Condition: used, Functionality: fully functional, Opportunity! Breton Combi Cut, built in 2013, with shuttle table and waterjet unit including KMT pump: Bwjln Nrowfqruoddel Available at short notice, fully functional, and can be inspected under power. Assembly and disassembly by factory technicians possible. Shuttle table Tilt table The weapon for ceramics and natural stone See attached order confirmation.

Year of construction: 2017, operating hours: 2,900 h, Condition: used, Functionality: fully functional, cutting width (max.): 1,240 mm, machine/vehicle number: JB/T1107-2017, Stone/Granite/Marble/Quartz Calibrating Machine. Unlimited length 1240mm wide sheets. Calibrate to within .25mm each pass. Has been used to calibrate glass/resin sheets prior to polishing stage. Great time saver. Available for immediate shipment at a great price. Delivery video is available if required. Bjlewfh Dzon Nrddjwl

Condition: like new (used), 8 impact bars for HAZEMAG APK50 mill Model: HAZ971 Each weight: approx. 146 kg Bwsln Nrdov N T Ihjdel

Condition: like new (used), Functionality: fully functional, Year of construction: 2023, 5 axis CNC stone saw - saws for all kinds of stone - saw blade diameter 400 mm - Max cutting thickness = 80 mm - saw milling combination - ISO30 - automatic for vertical loading of plates - compressed air clamping system - compressed air operated - Canon HD camera included W4000 H1800 L5900 Bwsln Njv Duhxorddjl

Condition: excellent (used), Year of construction: 2016, operating hours: 2,950 h, machine/vehicle number: 151000004909, Machine installed end of 2015, used ocasionally for kitchen countertops. Magazine for apx 40 tools, Agregate for diamond disc, cones and tools included, Working 2950h spindle (8700h switche ON). Bwoln Nrdsm Aldkedsl

Year of construction: 2024, Condition: new, Circular saw for stone with the possibility of straight cutting and at an angle of 45°. The machine in the basic version with a work table tilt of up to 85°, without rotation, which significantly reduces the final price of the machine. Monoblock machine - no additional costs such as pouring foundations under the table, possibility of moving the machine to another place at any time. Tilting head 0°-45° and with rotation 0° - 90°. Due to its weight, the machine is very solid and stable. Bsln Nrdog I Dniedewl The machine uses automatic central lubrication and helical gears, thanks to which the machine's operation is much quieter and will work longer. The maximum diameter of the saw is 650mm. The highest quality components from Siemens and Schneider were used in the circular saw. The machine is controlled using a touch screen and joysticks and buttons on the control panel, as well as a wireless remote control. The main engine has an inverter that allows smooth speed regulation. Cutting types: ✅ manual – in manual mode, we control the machine's operation mainly using joysticks on the control panel. There is also an option to move the head by a given distance in a given axis ("Manual movement distance"). Thanks to this option, we can precisely move the saw edge, e.g. by 200 mm to the right ✅ automatic – in automatic mode, we can save up to 12 cutting programs in the X axis (left-right) and in the Y axis (front-back). Additionally, we can decide whether we want the saw to return to the home-safe position after the program for cutting elements is finished Machine description: ✅ monolithic base with 2 horizontal beams – replacing foundations; no additional costs (pouring foundations for the table and load-bearing walls), relatively easy to move the machine at any time ✅ solid main bridge - cast iron ✅ tool head with tilt up to 45° and laser ✅ monolithic steel base with 2 horizontal beams (replacing foundations) ✅ work table, tiltable up to 85° ✅ tool head with tilt up to 45° and laser ✅ tiltable table up to 85° ✅ simple and quick machine programming ✅ possibility of working in manual and automatic mode ✅ components of the electrical cabinet based on components from Schneider and Siemens Movement in the given axes: ✅ X axis - cutting movement right - left Movement of the tool support along the bridge, the drive is realized by a helical rack and pinion; bearings on linear carriages ✅ Y axis – bridge movement forward, backward Bridge movement along horizontal guides, drive via helical rack and pinion; bearings on linear carriages ✅ C axis – head rotation Head rotation with disc 0° - 90° ✅ A axis – disc tilt Disc tilt 0°-45° ✅ Z axis – vertical disc movement Hydraulic drive ensures cutting accuracy and precision, manual limit switches 👌 This machine is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine work "live"

Condition: good (used), Year of construction: 2009, operating hours: 800 h, Functionality: fully functional, machine/vehicle number: 2009-44017, power: 2.7 kW (3.67 HP), overall weight: 25 kg, Diamond core drilling machine DM 330, 3-speed gearbox for core bit diameters from 40 to 350 mm, 5/4" thread, water connection for wet drilling, electric safety switch, adapter for 1/2" core bits, with swiveling drill stand and attachment kit, plus approx. 30 core bits up to 200 mm, 5/4" extension, alternatively, complete equipment for natural stone operations on request €55,000 (see additional individual offers) with self-dismantling and transport Bjlewczmkon Nrddswl

Condition: used, Year of construction: 1991, Vertical mill David Beln Nrevy Hzvjddjwl Type 50/5152 Year of manufacture 1991

Condition: used, Inlet: 1,000 x 350 mm, max. feed size: 320 x 320 mm, 45 kW electric motor, crusher weight: approx. 13.3 t, including steel base frame Bjljwb Dfgen Nrddewl

Year of construction: 2015, Condition: like new (used), machine/vehicle number: 4834, Catalogue price of the new machine at moment of purchase starts from 240.000€ net for basic set up. Machine production year 2014, installed 2015/2016. Top condition, gives clean cutting C120, therefore there is no need ot hone sandstone slabs. Bslomv Ercjn Nrddswl

Year of construction: 2023, Condition: new, Functionality: fully functional, Circular machine for stone on masonry with the possibility of cutting straight and at an angle of 45°. Machine with tilting of the working table up to 85°, with rotation of the working table 0° - 90°. Head tilting 0° - 45°, without rotation. The machine due to its weight (~6t) is very solid and stable. The machine uses straight gears. The maximum diameter of the saw is 700mm. The circular machine uses the highest quality components from Siemens and Schneider. The machine is controlled by a touch screen and buttons on the control panel. The main motor and axis drive motors have inverters, which allow for smooth speed adjustment. A built-in laser can be used to set the cutting line. Z-axis hydraulic drive. Manual stops must be set to determine the limit position. Work on the machine can be done in manual or automatic mode. In manual mode, we control the operation of the machine mainly with buttons on the control panel. In automatic mode, we can save several different cutting programs in the X-axis (left-right) and in the Y-axis (forward-backward). ✔ Types of cutting * manual - moving the head is done with the joystick on the control panel. * automatic - moving the head is done automatically after setting the cutting programs. ✔ Machine construction * strong, stable foundations Bsln Nrjqy Ebhoddjwl * solid main bridge * tool head with tilting up to 45° * table tilting up to 85°, rotating 0° - 90° ✔ Motion in given axes * X-axis - cutting movement right-left (movement of the tool slide on the bridge). * Y axis - forward-backward movement of the bridge (movement of the bridge along horizontal guides). * Z axis - vertical movement of the head * A axis - head tilt (0° - 45°). 👌 This machine is available "off-the-shelf", it is in our warehouse in Poland - Cisowa street 3, Bilcza 26-026 Morawica | you can make an appointment to see the work of the machine "live".

Condition: used, Year of construction: 2001, operating hours: 7,000 h, Functionality: fully functional, machine/vehicle number: 234-08-0, 950899, Water wall with fabric filters, Turrini Claudio s.r.l., Elletrofrigo, distributed by Goldschmidt GmbH Dortmund, built in 2008, 7.5 kW, 380 V, sanding dust extraction via negative pressure, dust binding in circulating water, plus a sanding workbench from Ecological Systems, distributed by Goldschmidt GmbH Dortmund, with integrated dust extraction, internal fabric filter with drum, built in 2001, 4.4 kW, 380 V, with 4 230 V sockets for manual tools, alternatively, complete equipment for natural stone operations available upon request for €55,000 (see additional individual offers), including self-dismantling and transport. Bolswcza Rjn Nrddswl

Condition: used, Nordberg cone crusher Type SX 100 HP Bslnsvy Hyfs Nrddewl

Condition: used, Functionality: fully functional, overall weight: 20,000 kg, total height: 5,000 mm, total width: 3,500 mm, total length: 13,000 mm, feed length X-axis: 400 mm, feed length Z-axis: 1,900 mm, Equipment: rotational speed infinitely variable, Carl Meyer gang saw for marble or sandstone with trolley, perfect for smaller blocks. Minimal energy consumption 18.5kW. Max block sizes 2800-3000/1900/1900mm. Machine sizes: L:13.5m, B:3.5, H:5.0m Frame size inside: 3600/1600mm. Carl Meyer saw for cutting marble/sandstone, with block trolley, perfect for smaller blocks. Bwelsv D I Ifsn Nrddel Minimal energy consumption - 18.5kW. Max block sizes 2800-3000/1900/1900mm. Frame size inside: 3600/1600mm.

Year of construction: 2023, Condition: new, Functionality: fully functional, Circular saw on steel walls for stone with the possibility of straight cutting and at any angle from 0° to 45°. Machine with a work table tilt of up to 85°, with rotation of 0° - 45° - 90° - 180° - 270°. The head tilts every 1° in the range of 0°-45°, without rotation, allows for cutting blades. Due to its weight, the machine is very solid and stable. The machine uses manual central lubrication and straight gears. The maximum diameter of the saw is 1200mm. The highest quality components from Siemens and Schneider were used in the circular saw. The machine is controlled using a touch screen and joysticks and buttons on the control panel, as well as a wireless remote control. The main engine has an inverter that allows for smooth speed regulation. A built-in laser can be used to set the cutting line. Manual limit switches were used on the Z axis to determine the limit positions. Bsln Nrdeqazbbjdjwl Machine features: • Possibility of cutting at an angle of 0°-45° with a tilt of 1° Precise setting of the cutting angle every 1° enables a wide range of applications, from simple cuts to complex work with materials of various shapes. This solution is ideal for cutting blades, which makes the machine extremely versatile. • Tilting work table (0°-85°) and full table rotation (0°-360°) The work table with an angle of inclination of up to 85° allows convenient and safe processing of heavy blocks of stone. Additionally, full 360° table rotation with stops (0° - 45° - 90° - 180° - 270° - 360°) allows precise positioning of the material without the need to reposition it. • Laser cutting line indicator The built-in laser indicator facilitates precise positioning of the material and cutting line, which increases work accuracy and reduces the time required to prepare for cutting. • Touch control and joysticks The machine is equipped with a modern Delta touch panel and joysticks for manual control, which makes operation intuitive, and adjusting operating parameters to the operator's needs quick and precise. • Solid, heavy construction The DSL-1200 45Q circular saw is very massive, which ensures stability during operation, even when cutting large and heavy blocks of stone. This stability increases cutting precision and reduces vibrations, which translates into higher cutting quality. 👌 This machine is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine working "live"

Condition: excellent (used), Year of construction: 2019, operating hours: 3,000 h, Functionality: fully functional, machine/vehicle number: SA001604/5143817, Screw compressor Boge GmbH & Co.KG, with integrated compressed air tank 250 l, pressure 10 bar for 1.53 m³/min, power 11 KW, 380 V, with cyclone separator, weight 400 kg, delivered and installed December 2021, regular maintenance and inspection by a specialist company, ran in single-shift operation with automatic shutdown, pre-filter changed monthly, with spare V-belt, alternatively on request complete equipment for natural stone operation € 55,000 (see further individual offers and various aids such as storage stands, etc.) with self-dismantling and transport Bjlnswcyvqj Nrddswl

Condition: used, Year of construction: 2002, Krupp cone crusher Type Krupp Kubria 90/1-08 Bwjlnjvy Hy Eo Nrddjl Year of manufacture 2002

Condition: excellent (used), Functionality: fully functional, overall weight: 50,000 kg, total height: 5,400 mm, total width: 4,500 mm, total length: 14,000 mm, feed length X-axis: 800 mm, rotational speed (max.): 80 rpm, 80 blade gang saw with top quality of cutting easily reaching C120 surface, so no honing is required. Blade stroke: 800 mm. Blades number: 80 Blade length: 4,350 mm. Motor power: 110 kW Cycles per minute: 85 Voltage: 400v/50hz Machine weight: 54,000 Kg. Useful cutting side: 3,200 x 2,000 x h 2,000 mm. Overall dimensions: 13,600 x 4,500 x h 5,400 mm. With n.2 block trolleys. More data or pictures upon request. Machine is fully functioning and in top condition. Bolov D Napen Nrddewl

Year of construction: 2023, Condition: new, Functionality: fully functional, The SHAMP-3200 single-head stone polisher, automatic polisher, is a professional machine that is used for polishing, grinding and brushing the stone surface and calibrating the thickness using diamond wagons. The monoblock construction ensures no additional costs such as pouring foundations for the table. An additional advantage is the ability to move the machine to another place at any time and the ease of installation. The single-head, bridge-type stone polisher is convenient to use and allows for quick and effective polishing work on most stone surfaces. The slide is guided by a linear guide immersed in oil, with long service life, high machining accuracy and an advanced control system. The machine is equipped with a PLC controller and high-quality components: Xinje touch screen, Zhengtai contactor, Schneider switching power supply, Omron relay, Omron proximity sensor. In the SHAMP-3200 polishing machine we can process stone with a thickness of 10-120 mm. Grinding head with the possibility of mounting 6 polishing wagons. Pneumatic pressure with an air demand of 0.6m³. Z axis travel equal to 110mm. The limit switches are set manually. The machine has a tilting work table up to 85° (hydraulic lifting), which greatly facilitates the loading of stone in machines of this type. This allows for easy and quite precise positioning of the stone in the appropriate position for grinding. Bsljg Iph Rjn Nrddjwl The machine uses separate inverters to regulate the feed speed on the X axis and the Y axis. Their power is appropriately adjusted, so you can precisely control the axis feed speed, which is particularly useful in this type of stonemasonry machines.

Year of construction: 2017, Condition: excellent (used), Functionality: fully functional, Promasz 1600mm circular saw with interchangeable tables, fully functional in very good condition. Used for cutting strips from wire saws into plates. Beln Nrdov D Nh Tsdewl

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, Promasz circular saw for discs up to 1300mm Bwoln Nrdov D Nhgedjl