Year of construction: 2005, Condition: excellent (used), pneumatic punching machine Cgeloff Apwoq Ag Hhjt

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Cjlq Agowhkywo Hhegt

Condition: good (used), Year of construction: 2017, operating hours: 9,495 h, lifting height: 6,040 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, mileage: 9,495 km, lifting capacity: 3,000 kg, EXPECTED This TRIPLEX forklift from the brand STILL comes from 2017 and is in good condition;The forklift has a capacity of 3,000 kg;Lifts to a height of 6,040 mm;The forklift is equipped with a FREELIFTEquipped with a SIDESHIFT;Drive-through height of 2,725 mm;Forks 1,200 mm;The battery is equipped with an external charger;Make an appointment for a test drive;Video to followFINANCIAL LEASE POSSIBLE, ask about the conditions Cgelq Agswhk A Se Hhjt Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner

Condition: used, Year of construction: 2005, Laminating machine GBC Voyager 3 Year: 2005 - Flat pile feeder - Laminating unit (roll) Cgjlq Ag Hjwhkz Ishst - Sheet separation - Delivery

Year of construction: 1980, Condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm Celq Ag Hsgyy I Aehjgt inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: good (used), Year of construction: 2013, operating hours: 8,036 h, lifting height: 4,765 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, mileage: 8,036 km, lifting capacity: 2,000 kg, EXPECTED This triplex electric forklift from the German brand STILL is from 2013 and is in good condition;Capacity is 2,000 kg;Lifts to a height of 4,765 mm;Drive-through height is 2,160 mm;Equipped with a FREELIFT and SIDESHIFT;Forks are 1,200 mm;Battery from 2024 is equipped with an external charger;Video will follow Cjlqowhkzzo Ag Hhogt

Year of construction: 2005, Condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Stroke 20 mm Cgolq Agoff Apio Hhst

Year of construction: 1996, Condition: good (used), A used CNC machining center MAZAK equipped with: - MAZATROL M32B control - tool magazine 24-fold - chip conveyor - lighting system - clamping system (two machine vices and hydraulic unit) - documentation traverse X/Y/Z 1120/510/510 spindle speed 40-7000rpm spindle mounting BT 40 Further tech. Date see pdf. Document Pure cutting time 7.800 hours Tech. Data and dimensions: Errors excepted. Cgjlehl Dbdjq Ag Hhjt

Year of construction: 1991, Condition: good (used), machine/vehicle number: 5206595, STAHL cable hoist used in good condition incl. electric trolley control bottle flat cable with cable trolley lifting capacity 4,0ton hook path 7,5m hoisting speed 4/0,65m/min further techn. data see pdf.- document Cgolqscr Ayzo Ag Hhet

Condition: used, Dear Sirs, We offer you modular systems of small crane systems of the companies "DEMAG" and "ABUS" used, partly as good as new, at favourable conditions. The systems are tailored to your needs. In case of inquiries, please tell us whether you want to carry out a linear or area-wide transport. Furthermore, we need your information on the load capacity, crane girder and track lengths, suspension distances, roof pitches and type of ceiling construction. Please tell us your lifting problems. Colqep Dhbs Ag Hhogt Furthermore, we can offer you the electric chain hoists at favorable conditions.

Year of construction: 1990, Condition: used, a used well preserved cold circular saw OMP Saw blade 425mm cutting range 90° 150mm Two cutting speeds 13/26m/min Feed speed infinitely variable Length stop with roller conveyor 3000mm infeed 2000mm Colq Aocmn Eveg Hhsgt Cooling device

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Punching capacity 420kN(42Tons) throat of the punch 320mm Cgslq Aob Ilbfsg Hhet flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Further technical data on request.

Year of construction: 2009, Condition: new, belt dimensions 2000x100mm Belt speed 30m/sec Cslq Ag Hjx Davshogt Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Weight 200kg Rollers for grinding rye 3/4";1/2"; 1"; 11/4"

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND bending length: 1020 mm bending capacity: 2,5 mm Cgolq Agjpgmtwj Hhot max. bending angle: 0 - 135°. segmentation of the upper beam: 270; 200; 150; 100; 75; 50; 45; 40; 35; 30; 25 mm opening width of the upper beam: 45 mm backgauge manually adjustable up to: 540 mm weight: 285 kg

Condition: as good as new (ex-display), A demonstration double miter metal cold circular saw with 350mm circular saw blade Cutting range round/rectangle 90° 120/ 140x100 mm round/rectangle 45° right and left 100/ 100x100 mm speed 18/ 36 m/min Further tech. Data see pdf. Document Tech. Data and dimensions Errors excepted Cgjlq Agopgmngs Hhet

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Cgjlq Agopgmufo Hhjt Tech. Data and dimensions: Errors excepted

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND Belt dimensions: 2000 x 75 mm Celq Aspgmtzsg Hhogt belt speed: 18/ 37 m/sec power: 2,2/ 2,8 kW 400V/50Hz weight: 90 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: used, A used well preserved universal drilling and milling machine Bohner and Koehle equipped with: - 3-axis digital display HEIDENHAIN Cgelspai Dhsq Ag Hhjt - Swivel head 90° right/left - Large rotary table 800 x1200mm - central lubrication - documentation Table size 800x1200mm Table load 1000kg longitudinal movement X- axis 1000mm transversal movement Y- axis 800mm vertical movement Z- axis 800mm movement of rotary table 360 table feed longitudinal and transversal stepless 26 - 1100mm/min Rapid feed longitudinal and cross 1600mm/min feed vertical stepless 7 - 350mm/min rapid traverse vertical 500mm/min main drive: Milling spindle drive 2,5/ 3kW spindle admission SK40 12 speeds 45 - 2800rpm Dimensions and weight of the machine: Width 220cm depth 220cm height 250cm Weight of the machine 3.300 kg Tech. Data and dimensions: Errors excepted

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam Cgolq Ag Hspgmqiohst bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg Cgolopgmq Ueq Ag Hhst option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm Cslq Agjpgmpdj Hhjgt weight: 2500 kg

Year of construction: 1997, Condition: good (used), A vertical machining center from DECKEL MAHO, used in good condition. Equipment - CNC control PHILIPS DIALOG 112 - Direct path measurement (rulers) - tool magazine - Electronic handwheel - Central lubrication - Spindle cooling - documentation Travel X/ Y/ Z 700/ 550/ 500 mm spindle speed infinitely variable 15.000 rpm table dimensions 900 x 550 mm table load 800 kg working feed X/ Y 1 - 10000 mm/min rapid traverse X Y Z 30 m/min rapid traverse Z 20 m/min tool magazine 30 places Celqsi Dt Dkj Ag Hhogt Tool holder SK 40 Rated power 50 KVA Rated current 70 A Compressed air supply 6 bar Transport dimensions L x W 3.3 x 2.4 m Machine height 2,6 m Weight of the machine 7000 kg Technical data and dimensions: Errors excepted.

Condition: as good as new (ex-display), A demonstration metal band saw machine with base, quick clamping device and coolant device. Cutting range round/ rectangle/ flat 90° 220/ 220x220/ 250x155mm round/ rectangle/ flat 45° 160/ 160x160/ 160x100mm round/ rectangle/ flat 30° 100/ 100x100/ 100x85mm Cgslqjpgmkyj Ag Hhot Cutting speed 32/ 66m/min Further Tech. Data see pdf. Document Tech. Date and dimensions: Errors excepted.

Condition: as good as new (ex-display), A demonstration double miter matall cold circular saw with circular saw blade 275mm Cutting range round/rectangle 90° 70/ 90x45 mm round/rectangular 45° left and right 65/ 70x45 mm speed 42/ 96 rpm Further tech. Data see pdf. Document Cgslq Ag Hspgml Nshet Tech. Data and dimensions: Errors excepted

Year of construction: 1990, Condition: excellent (used), machine/vehicle number: VH-7360, a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,. Coolant system, central lubrication system, lighting, TFT - monitor new. Traverse path x/Y / Z 1600/ 800 / 650 mm Spindle retainer for SK 50 Spindelderhzahl 60-1800U/min Working feed 10-3000 mm / min Cslq Aodzy Uyeg Hhsgt Rapid traverse 10 m / min Table size 1800x610mm Machine weight 9500 kg Table load: 3000 kg