CNC machining centre

MAZAK VTC 20B

Condition: excellent (used), Year of construction: 1995, Mazatrol M32 B control Travel X/Y/Z: 1660/510/510 mm Spindle speed: 7000 rpm Lhsdpjyiu Rhefx Agzjc Tool magazine for 24 tools, SK 40 Table size: 2000x510 mm

Condition: excellent (used), Year of construction: 2000, pressure 105 t chamfer lenght 3100 mm distance between columns 2600 mm table width 100 mm table height 750 mm Control DELEM DA 65 dayligth 200 mm working feed 0 - 10 mm/sec return speed 0-100 mm/sec rapid traverse - up max. 100 mm/sec voltage 380 V / 50 Hz total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video Lhodpfevq R Uujx Agzjc • controlled backgauge 2 axis • upper and lower tool • 2 hand control / foot switch

Year of construction: 1997, condition: ready for operation (used), Controls: MAZATROL M PLUS, weight: 5.85t, operational hours counter: 42,150h, with magazine and accessories. Lhjdpfeiph Ukjx Agzjc

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, total height: 2,692 mm, table load: 700 kg, overall weight: 5,500 kg, number of axes: 3, This 3-axis Mazak VTC-20B was manufactured in 1996. It features a Mazatrol M-Plus or M-32B controller, with axis travels of X=1120 mm, Y=510 mm, and Z=510 mm. The table supports up to 800 kg, and the spindle operates at speeds up to 10,000 rpm. Note: the handwheel requires repair. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Size: 1460 × 510 mm • Tool magazine: 24 pocket Extra Information The handwheel is not fully operative and needs a repair. Lhsdeyalicspfx Agzsc Dimensions Machine Depth 2997 mm

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle Lhedpferz Nflox Agzec - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 1999, functionality: not functional, machine/vehicle number: 143826, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, Mazak VTC-20B machine is powered but no longer operational. Lhodpfx Ajxrymrogzec

Condition: used, Vertical Machining Center MAZAK VTC-20B – Year of manufacture: 1998 • CNC Control: Mazatrol M Plus • Axis Travels: X = 1660 mm, Y = 510 mm, Z = 510 mm • Spindle: • Taper: ISO 40 • Max speed: 7,000 rpm • Power: 7.5 kW • Tool Changer: • 24-position automatic tool changer • Feed Rates: • Rapid traverse on all axes: 30,000 mm/min • Table: • Size: 2000 x 510 mm • Max load: 500 kg • Cooling System: • Standard integrated system • Dimensions & Requirements: • Footprint: approx. 3200 x 2700 x 2800 mm • Weight: approx. 5200 kg • Compressed air: 6 bar • Note: Machine in full working condition, available for inspection on request Lhedpfx Agswdrftezjc

Condition: excellent (used), Several 150 m³ steel storage tanks (extinguishing water tanks) located underground Volume: 150,000 litres diameter: approx. 3.000 mm length: approx. 22.500 mm Weight: approx. 28,000 kg The tanks are converted to underground extinguishing water tanks according to DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Lhedpfefnh Tgox Agzoc Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bitumen exterior coating by us at the factory. - if required, we can provide the tank with a full bitumen-based interior coating (against corrosion) or epoxy resin interior coating A cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, you will then immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth (a) barth-tank. de

Condition: used, Technical details: number of controlled axis: 6 workpiece weight: 20 t operating time: 4290 h Lsdpfx Agou Nwfbozjhc control: YASKAWA total power requirement: 35 kVA Total weight, approx.: 2000 kg dimensions L x W x H: Roboterschweißanlage: 2,7 x 1,1 x 2,0 m dimensions electric cabinet: L:700 x B:800 x H:2000 mm Robot specifications: -6 different directions of movement -payload max. 20kg -working curves: turning curve=1717mm, turning height=1417mm; turning width=2072mm -rotation axis arm: S-axis rotate=+/-180°, L-axis lower arm=+1550° / -110°; U-axis upper arm=+255° / -165° -rotational axes wrist: R-axis roll=+/-200°, B-axis pitch-swivel=+230° / -50°, T-axis rotate=+/-360° -rotational axis speed: S-axis and L-axis = 170°/s; U-axis 175°/s; R-axis and B-axis 355°/s; T-axis 525°/s -permissible torques: R-axis and B-axis=39.2 Nm; T-axis 19.6 Nm Welding equipment specifications: -Fronius, TIG welding, (DC and AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, IP23 protection class. Table top unit specifications: -Table support Ø 600mm, rotate 360°, swivel 90° each right/left. Details of the wire feeder: -Fronius, type KD 7000, feed 0,2 - 22m/min., protection IP23, voltage U1 230V Manual control unit Control cabinet i.D. *

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Lhjdpsd Hxx Ajfx Agzsc Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.