Used Testing Press for sale (21,782)

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: Gbedpfx Aou Nfq Ejkyou 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. * Gbedpfx Asu Nfrpekyju

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm Gsdpfx Akou Nfr Nsyjbu - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws i.D. *

Condition: used, Year of construction: 1960, Technical details: Gedpfx Akju Nfudsyebu pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm Gbodpfxou Nfv Uj Akysu height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Technical details: Gjdpfeu Nfw Sox Akysbu pressure: 0,9 t daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation *

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system: Vite ironing/steaming table with 4 height-adjustable Whirlpool hoods and 2 steam generators. Gedpfx Akju Nyu Seyjbu Working width approx. 340 cm. 9000W Year of manufacture: 2002 223-380V Pr12LP Control system: GE VAT20 U20NOK7S You can find more products in our shop!

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm No. 5: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device * Gbodeu N Ay Rspfx Akyou

Condition: good (used), Year of construction: 1999, Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Gbedpfx Aksu Ecrxoysu Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 External dimensions (W x D x H): 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (W x D x H): 3100 x 1000 x 880 mm Weight: 390 kg You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, Horizontal bending machine T 1000 Multi - ZOPF - with semi-automatic control - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 10 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 2300 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 300x32 mm (V200) Godpfx Akeg Anureyebu round tube 3/8" - 3"

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Gedoyt Idvepfx Akyobu Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools -we bought this maschine as new for 340 000 EUR in year 2019 Godeyilh Iopfx Akysbu

Condition: new, Year of construction: 2025, HIDRAULIC BOOK PRESS PK-55x38 H -is a double press of very new conceiving for books and agendas -it is quick and simple to use -maximum size of material; 550x380 mm -the new model has a timer Gsdpfx Akjbyhnkjyobu

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Godpfeb Eln Dsx Akyobu Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Godpfx Aksdwh E Aeyjbu Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. Gbodpsdx R Tfefx Akyeu - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery Gbodpfx Asdntc Nskyou OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption Godpfx Aewbdv Sekyobu No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Refrigerating unit: Water-cooled Weight: approx. 940 kg Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Gbsdpfx Ajx Exmtskyou Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Godpfjw Sgnkox Akyebu Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance Gbodpfx Aoyy Hgqokyou :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: new, Professional test cover (prufhaube) from the renowned German manufacturer SCHLEICH – model 13-R2. The device is designed for laboratory and industrial use, ensuring maximum safety during high-voltage electrical testing. The unit is in factory-new, warehouse condition – it has never been used. Gbsdpsy Aggcofx Akyou ⚙️ Technical specifications: manufacturer: SCHLEICH (Germany) model: 13-R2 type: test cover / prufhaube year of production: 04.2023 serial number: 21942 country of origin: Germany ✅ Key features: professional test zone (“forbidden zone”) transparent cover – full process control safety system (locks / sensors) robust industrial construction high manufacturing quality – made in Germany ideal for HV/electronics/production testing 📦 Condition: New – warehouse stock, unused. May have minimal storage marks. 📸 Included: device as shown in the pictures

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Gbsdpfxjf Rt Ubj Akysu

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climate testing chamber -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R 404A used climate chamber Microprocessor-controlled control and monitoring system SIMCON/32 32-bit technology Graphical display of setpoint and actual values Digital display of setpoint and actual values for temperature and relative humidity (%) Digital input for temperature (°C) and relative humidity (%) Integrated programmer Program memory Manual and automatic operation Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Gbodpfx Ajph U Ayskyju Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm You can find more climate chamber items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Gbedjzma Skepfx Akyou