Used Horizontal Bending Machine for sale (84,662)

Condition: new, Year of construction: 2025, pressing force: 20 t, – Capacity 20 tons – Bending capacity 200 x 12 mm – Stroke 200 mm – NC touchscreen control – Foot control – Emergency stop Prsdpfx Aevt Eunjdned – 400V

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel Pjdpefg Eu Usfx Adnjrd • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20830 € 399.94 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm Prsdpfxsxh Ruls Adnsd 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec Pedpfogvkigox Adnsrd tank capacity 80 l Pressure power 320 bar total power requirement 5,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg Prsdpfexfb Ikox Adnjd The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: HorizOne50_2, overall weight: 1,500 kg, tool height: 300 mm, operating speed: 10 mm/s, total length: 1,850 mm, total height: 1,250 mm, total width: 850 mm, reverse speed: 40 mm/s, working height: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, table height: 1,000 mm, stroke length: 250 mm, pressing force: 50 t, length stop: 1,000 mm, working width: 300 mm, lifting speed: 10 mm/s, bending force (max.): 50 t, warranty duration: 36 months, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. Predpsxd U Emjfx Adnsd 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D control system. Automatically controlled side stop for convenient processing of your sheet metal parts from individual part production to series production.

Condition: used, Year of construction: 2016, pressure 10 t stroke 150 mm toolpiece height max. 100 mm Prsdpfx Adjv Irihjnjd speed 10 mm/sek. bending capacity max. - flat 100 x 15 mm total power requirement 1,5 kW weight of the machine ca. 100 Kg dimensions 1,2 x 0,8 x 0,4 m Horizontal bender - Incl. 2 set bending tool - Emergency stop device

Year of construction: 2009, condition: good (used), machine/vehicle number: 133, Offer 18291 Hydr. horizontal bending machine - straightening machine Technical data: - Pressure power 100 KN / 10 t - pressure force adjustable 0 - 100 kN - stroke length 0 - 150 mm - Clear width approx. 200 mm - Stroke speed 0 - 0,6 m/min - Tool height up to approx. 100 mm - Bending capacity - with prism MW 100 flat up to approx. 100 x 12 mm Prodpfxeg Ewi Ns Adned - Tube bending up to approx. 1 inch - straightening capacity Wy with straightening block distance of 1m 100 cm³ - Drive 400 V / 1,1 kW - space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Pedjwiq N Iepfx Adnsrd Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar Predpfx Ajgvkmrodnjd weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. Prsdpfouddi Hex Adnsd The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: like new (used), Year of construction: 2011, STIERLI - Bender 300 HE / Horizontal bending machine -Year of manufacture 2011 -CE marking -Max. working pressure 300KN -Stroke length 300mm Predpfx Adowp S Ifsnjd -Motor power 4 KW -Hand switch -Foot switch -Various dies -Bending tools -Stop -Documentation Dimensions: L x W x H 1.5 x 1.2 x 1.3 meters / Weight 800Kg Errors / input errors excepted

Condition: new, pressure 10 t stroke 200 mm table-size 450 x 450 mm working speed: 10 mm/ sec. work height max. 940 mm toolpiece height max. 150 mm total power requirement 1,1 kW 150 x 6 mm weight 0,4 t dimensions 1,15 x 0,5 x 0,9 mm Podpfot Eacajx Adnjrd Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm Prjdpfx Adjwp Egujnjd - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: new, Year of construction: 2025, neu 2025 090089 prompt, Zwischenverkauf v Türkei 8900 € 171.77 € 1 20 to 185 mm 200 x 12 mm Psdpfx Adowiqt Tsnjrd 480 x 1060 mm 200 mm 80 mm 10 mm/s 10 mm/s 2.2 kW 930 mm 1150 mm 480 mm 1200 mm 530 kg Programmable stroke and retraction point Adjustable speed and pressure Manual jog operation and automatic operating mode Holding pins and tools hardened and ground 3 holder pins Bending tool Manual stop 400 mm Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, bending radius min. 190 mm square edge steel 20 x 20 mm flat steel 100 x 7 mm round bar steel 22,0 mm L-beam 100 x 10 mm range L-W-H 900 x 430 x 310 mm weight of the machine ca. 33.0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate - Stepless angle stop Psdoxcuyhepfx Adnsrd - Terminal block with eccentric clamp - Material stop

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Pjdpfxsuddfbs Adnord Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 20 t stroke 200 mm table-size 550 x 550 mm working speed: 10 mm/ sec. Prodpfx Adevn U Dusnjd work height max. 940 mm toolpiece height max. 200 mm total power requirement 2,2 kW 200 x 10 mm weight 650 kg dimensions 1,1 x 0,6 x 1,22 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 21900 € 420.48 € 80 to 285 mm 300x25 mm 750x1425 mm 300 mm 105 mm 10 mm/s 10 mm/s 10 kW 930 mm 1430 mm 750 mm 1450 mm 1700 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal Prodpfswiqrcjx Adned OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm bending radius min. 190 mm round bar steel 18,0 mm weight of the machine ca. 33,0 kg. Characteristics : - For precise cold and hot bending of flat, round and square steel - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 Prjdpoxcux Rjfx Adnod - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins Predpfxstq Du Rj Adnsd - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, pressure 20.0 t stroke 185 mm Psdpsxabtvsfx Adnerd flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Podpfjxabhmex Adnsrd * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker Podpfxsxabhaj Adnord - Operation manual

Condition: used, Year of construction: 2012, pressure capacity max. 10.0 t bending capacity - flat iron ca. 100 x 12 mm stroke 0 - 150 mm dayligth ca. 100 mm assembly distance ca. 200 mm print area 0 - 100 kN stroke speed max. 0.6 m/min table surface area 1000 x 600 mm work height max. 845 mm operating pressure max. 260 bar engine output 1.1 kW weight 400 kg range L-W-H 1100 x 800 x 1000 mm Equipment: - Robust electro-hydraulic horizontal bending machine - Large worktable (1000 x 600 mm) - Hydro-mechanical stroke limiter - Continuously adjustable punch stroke - Side-mounted, one-handed operation - 1x bending tool set * Reversible die with 80/50/40 mm opening - Control cabinet - front Podpfxoxaa Ils Adnjrd