Single Column Press - Hydraulic

WMW Zeulenroda PYTE 2.5x150

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pgsdpsu Nfwlofx Ag Reu Pressure test up to 2,3to performed. Good condition. *

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Pjdpfexlngaex Ag Rsgu Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: good (used), Bar feeder LNS Pgodpfsr Iygisx Ag Rju

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Psdpfx Agsd E Np Ee Regu Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH planetary concrete mixers enable the production of homogeneous concrete in a short time thanks to their high-performance mixing technology. In planetary mixers, the mixing arms rotate both around their own axis and around the center, ensuring that every part of the mixture is processed evenly. Thanks to this unique design, it is possible to produce concrete with a perfect consistency in as little as 30 seconds after adding water. Planetary mixers stand out from classic twin-shaft mixers with their energy efficiency, cement savings, and superior durability. Planetary Concrete Mixer Technical Specifications MODEL: CPLN - 0.5 Loading Volume: 750 liters Fresh Concrete Volume: 625 liters Compacted Concrete Volume: 500 liters Motor Power: 18.5 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 0.75 Loading Capacity: 1000 liters Fresh Concrete Volume: 875 liters Compacted Concrete Volume: 750 liters Engine Power: 30 kW Bottom Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1 Loading Capacity: 1,500 liters Fresh Concrete Capacity: 1,250 liters Compacted Concrete Capacity: 1,000 liters Engine Power: 45 kW Lower Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1.5 Loading Volume: 2,250 liters Pgedpfx Agsxp U S Do Reu Fresh Concrete Volume: 2,000 liters Compacted Concrete Volume: 1,500 liters Motor Power: 2 x 30 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 10 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 2 Loading Volume: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Bottom Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 12 mm ST 52 Mixing Arm Wear Plates: 30 mm Ni-Hard Why Choose CONSTMACH Planetary Concrete Mixers? CONSTMACH manufactures mixers that deliver maximum performance even under the most demanding production conditions, backed by years of engineering experience. Each model is equipped with high-quality materials and CE-certified motors. Our planetary mixers secure your investment with low maintenance costs, high mixing efficiency, and a long-lasting design. Additionally, optional chrome carbide coatings, additional discharge covers, and different mixing arm options ensure full compliance with your production needs. For professionals seeking durability, efficiency, and technical excellence, CONSTMACH Planetary Concrete Mixers are the smartest investment choice in their class. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m Pgodpfx Agju N A Uuo Reu further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity Podpfx Agehyc Nwe Rogu a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: used, Technical details: pressure: 25 t stroke: 500 mm Pgsdsvc Awxopfx Ag Rsu daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1994, functionality: fully functional, Used condition. Pgjdpfexbpxiox Ag Rsu

Year of construction: 2008, condition: used, functionality: fully functional, Haeger insert molding machine 824WT-3H, manufactured in 2008, with a feeder hopper. In the summer of 2025, the upper and lower tool sets were replaced with a retrofit kit TIS-2 to TIS3, performed by the manufacturer. In July 2026, the touch screen PC was completely overhauled and equipped with a new flash card. The machine is in operation and can be inspected. Sale is without warranty or return, payment in advance required. Machine is available upon agreement in 2026. Pgjdpfx Aeyq Nxijg Reu