Used Testing for sale (10,329)

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm. Psdpfx Asvr Hf Ejh Hogg

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Podpfx Ajxw N Uvoh Hjgg Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: used, max. wheel diameter 0 mm Pgsdpfx Asvn Unyjh Heg gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines.

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Psdpoyc R R Djfx Ah Hsgg Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. Pgsdpfxoyc H N Nj Ah Hsg The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer Pgsdpob A Ivzefx Ah Heg -Number: 7 available -Price: per piece

Year of construction: 2008, condition: excellent (used), Robot cell for leak testing consisting of: Robot FANUC LR Mate 200iC/5L - 2008, Table for measurements, equipped with 8 light curtains, 2 pieces of Innomatec equipment for leak testing, type LTC - 502. The cell has a safety system and CE Pgjdpjn D D E Tsfx Ah Hjg

Condition: excellent (used), Year of construction: 2003, max. wheel diameter 600 mm gear width 700 mm max. module 20 min. module 0,5 table diameter 300 mm x-travel 300 mm y-travel 600 mm Psdpfxjwyxyce Ah Hogg z-travel 700 mm workpiece weight 300 kg Control Zeiss max. workpiece diameter 600 mm clamping length 20 - 1000 mm ical angle 90 ° total power requirement 2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3,0 x 2,0 x 2,4 m Form measuring machine,gear measuring machine,coordinate measuring machine --> Primar MX 4 WL Suitable for transmission shafts, pinion shafts, gears, pistons, gearboxes, connecting rods, camshafts and crankshafts, crankcases, cylinder heads,... Air-suspended, centering and tilting table, support bearings, high-precision design! Software: Gear, hob, piston, bevel gear, crankshaft, tapered mandrel, drive bevel gear, connecting rod,... New software update 2014!

Year of construction: 2021, condition: excellent (used), Weiss Pgjdpfx Aheycvd Ns Heg Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 Pgedsycvdiepfx Ah Heg - Weight: approx. 470 kg For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone.

Year of construction: 2021, condition: used, machine/vehicle number: 2150801, max. clamping length: approx. 60 cm, with darkening cabin Pgodpfx Ahsx Akkce Hsg

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : Pgodpfx Aexvdrysh Hog KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. Pjdpfeya Ev Nex Ah Hegg This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: used, Year of construction: 1991, max. wheel diameter --- mm gear width --- mm max. module --- min. module --- Control --- total power requirement --- kW weight of the machine ca. --- t Podpfx Aheya Eqao Hsgg dimensions of the machine ca. --- m

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for temperature and humidity testing of multiple test specimens simultaneously. Device Description: This climatic test cell enables you to evaluate the function or material properties of test items under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal environmental transfer to the test samples. The air treatment section is positioned at the rear of the chamber interior. The refrigeration units are accessible in a separate frame located behind the device. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A blower system allows the chamber to be purged with fresh air as needed. Technical Performance Data: Temperature Testing: - Temperature range: -60°C to +100°C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test item and thermal radiation, measured at supply air): - Heating: 2 K/min from -40°C to +85°C - Cooling: 2 K/min from +85°C to -40°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1% to ±3% r.h. Technical data is based on an ambient temperature of +25°C, nominal voltage 400 V, without samples, without radiation, and without additional equipment. Dimensions: - Internal dimensions (test chamber/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Pedpfx Aex Eabpeh Hsgg - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Configuration: - Cooling unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power regulation via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight forwarder possible – costs and arrangements upon request - Scope of delivery: (See image) (Specifications subject to change and errors excepted!) We will be happy to answer additional questions by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber allows you to evaluate the performance or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal temperature and humidity transfer to the test specimen. The air treatment compartment is located at the rear of the interior chamber. The system units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate control cabinet, with the operator panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point area: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time Pgodpox Eaxbefx Ah Hjg - Humidity deviation: ±1 – ±3 % RH over time The technical data apply to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, radiant heat, or additional features. Dimensions: Interior (Test Chamber/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: - Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, with stepless capacity adjustment via electronic monitoring and control system - Environmentally-friendly refrigerants: R 23 / R 404 A Notes: - Inspection available by appointment (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request - Scope of delivery: (see picture) (Subject to technical modifications and errors in specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Podpfxox D Abpe Ah Hsgg Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional Leak Testing, Sniffer & Vacuum Operation Description: For sale is a professional helium leak detector Pfeiffer Vacuum HLT 560. The device is designed for highly precise leak detection using helium and is typically used in industry, manufacturing, quality assurance, laboratories as well as technical service. It is suitable for safe detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffer modes. With the sniffer probe, leak locations can be specifically pinpointed, while in vacuum mode, entire assemblies or systems can be tested. An integrated turbopump and forepump make the device a complete, mobile test system. Applications (examples): - Leak testing of components and assemblies - Testing of vacuum chambers, pipelines, valves, heat exchangers - Quality control in production - Service and maintenance work on vacuum equipment Technical Data: Manufacturer: Pfeiffer Vacuum Model: HLT 560 Test gas: Helium Measuring principle: mass spectrometric helium leak detection Operating modes: vacuum operation / sniffer operation Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Pgsdpfx Aoyaxu Soh Hog Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge port Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 44 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Further questions can gladly be answered for you by phone.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Pjdpfeydazuox Ah Hsgg Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips. Pgedpfjydanhex Ah Hsg

Year of construction: 2025, condition: used, Universal Testing Machine PM10 Force: 10 kN Crosshead stroke: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick tests' without the need for a PC. For tests requiring data storage and curve recording, the basic software provides full control and evaluation capabilities. It allows you to generate various test sequences and create test reports. In addition, you have the option to further process the raw data in your own programs. Options: Pgedpeyc U Ugofx Ah Hog - Delivery and commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and Fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Traverse stroke: 1200 mm Working space depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Travel resolution: 0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Pjdpfxoyc U Rbs Ah Hsgg Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be conducted without a PC. For tests requiring data storage and recording of the curve progression, the basic software enables both control and evaluation. The software allows you to generate various test sequences and create test reports. Additionally, you can further process the raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: PM3, Universal Testing Machine PM3 (2020) Force: 3 kN Crosshead Stroke: 520 mm Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Travel Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, our basic software provides the capability for control and analysis. This enables the creation of various test sequences and the generation of test reports. Furthermore, you have the option to further process the raw data in your own programs. Psdpfx Ahjyc U Dbj Hogg Optional: – Delivery & Commissioning – DAkkS or factory calibration according to DIN EN ISO 7500-1 – Grips and fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Pgedjrt U Nujpfx Ah Hjg Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price. Psdpjx Apntjfx Ah Hsgg