Used Testing Press for sale (21,245)

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann Rbsdox Ry Tfepfx Ab Isw +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 1965, Make: MÜLLER, Model: BZE1600-35.2.1, Year of manufacture: 1965, Serial no.: 902, Max. press force: 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), Sliding table, 3,500 x 2,750 mm, Ram clamping area 3,500 x 2,750 mm, Ram stroke 1,400 mm, Ram adjustment 350 mm, Cushion force (table) 36 - 360 t, Cushion stroke (table) 250 mm, Hydraulic tool clamping on ram, Press control, Manufacturer: Siemens, Type: Simatic S7, Operator panel: Simatic OP37 Rbsdpfx Aex Rzkxsb Isw +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 1987, Mechanical high-performance stamping press for industrial serial production of stamped and formed parts. Manufacturer: Müller Weingarten AG Type: HU2-315.25 Year of manufacture: 1987 Press force: 3150 kN Stroke: 300 mm Slide adjustment: 250 mm Strokes per minute: 15–90 min⁻¹ Machine weight: 100,000 kg Total weight: 107.8 t Individual weight G1: 91 t Individual weight G2: 5.4 t Individual weight G3: 2.4 t Individual weight G4 without coil: 7.5 t Individual weight G5 without coil: 1.5 t Machine motor power: approx. 92 kW Static foundation load: approx. 98.8 t Dynamic load on slide: 240 kN Dynamic load at cutting impact: 160 kN Rbodpfoyyccbjx Ab Iew

Condition: used, Year of construction: 1992, Manufacturer: ONA-PRES, Model: EBd-100-4.5-AB, Year: 1992, Serial No.: P-01125, Maximum pressing force: 1,000 t, Table size: 4,500 x 2,700 mm, Ram stroke: 1,400 mm, Installation height: 800 - 2,200 mm, Table draw cushion: 60 - 250 t, Draw cushion stroke: 300 mm, Ram cushion stroke: 200 mm, Press control, additional control for ram, 5-piece cabinet assembly with accessories Rbedpox R Dx Ejfx Ab Ijw +++ Attention: This machine is part of an online auction! +++

Condition: used, Year of construction: 1989, pressing force: 620 t, Krupp Multistage Press PST-0-II 120-500/1+6/450/500 NC Multistage transfer press for automated sheet metal forming and series production of stamped and drawn parts. Rbodpfx Aoyyb I Aeb Ijw Manufacturer: Krupp Maschinentechnik GmbH Machine type: PST-0-II 120-500/1+6/450/500 NC Year of manufacture: 1989 Total press force: 6200 kN Max. drawing stage press force: 5000 kN Max. cutting stage press force: 1200 kN Number of stations: 6+1 Station pitch: 450 mm Max. press force per station: 2500 kN Cutting ram stroke: 160 mm Drawing ram stroke: 500 mm Ram adjustment: 50 mm Continuous stroke rate: 8–32 strokes/min Setup stroke rate: 2–8 strokes/min Ram energy capacity: 100 kJ Energy capacity in setup mode: 20 kJ at 4 strokes/min Energy capacity in setup mode: 5 kJ at 2 strokes/min Main motor drive power: 97 kW Clearance between uprights: 3300 mm Clearance between oil trays: 3100 mm Drawing depth: 100 mm Ram stroke drawing: 500 mm Ram stroke cutting: 160 mm Coil entry height: 1480 mm Die installation height: 1050 mm Table size: 1000 x 2600 mm Strip width: 100–600 mm Max. coil diameter: 1800 mm Press weight: approx. 180 t Air consumption: 13.5 Nm³/h Total connected load: approx. 200 kW Location: Munich

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6430025, functionality: fully functional, stroke length: 215 mm, overall weight: 10,000 kg, controller model: Cybelec ModEva 12 CNC, bending force (max.): 150 t, working length: 3,100 mm, TECHNICAL DETAILS Working length: 3,100 mm Bending force: 150 t Stroke max.: 215 mm Downward speed: 190 mm/s Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Rsdpfx Abjyyb D Rj Iobw Control unit: Cybelec ModEva 12 CNC CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Weight: 10,000 kg Main motor power: 11 kW Total connected load: 15 kW Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Nominal pre-fuse current: 35 A Hydraulic operating pressure: max. 300 bar Pneumatic operating pressure: max. 8 bar Overrun distance: 9 mm EQUIPMENT Hydraulic upper clamp: RFA Hydraulic lower clamp: WILA 13 mm

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 25084, functionality: fully functional, stroke length: 400 mm, controller model: Cybelec DNC 800 CNC, bending force (max.): 250 t, working length: 6,100 mm, TECHNICAL DETAILS Pressing force: 250 t Working length: 6,100 mm Stroke: 400 mm MACHINE DETAILS Control: Cybelec DNC 800 CNC Number of axes: 4 (Y1, Y2, X, and R) Connection: 400 V Pressure: 290 bar Noise level: 65 dB(A) Redpjyybzisfx Ab Iebw Weight: 24.5 t EQUIPMENT Hydraulic CNC crowning for precise bending results

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6440022, functionality: fully functional, stroke length: 415 mm, overall weight: 17,600 kg, controller model: Cybelec ModEva12 CNC, bending force (max.): 200 t, working length: 4,100 mm, TECHNICAL DETAILS Pressing force: 200 t Working length: 4,100 mm Stroke: 415 mm Rapid traverse down: 190 mm/s Working speed: 10 mm/s Rapid traverse up: 150 mm/s MACHINE DETAILS Control system: Cybelec ModEva12 CNC Axes: Y1, Y2, X, R, Z1, Z2 Weight: 17,600 kg Main motor power: 18.5 kW Total connected load: 22 kW Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated pre-fuse current: 50 A Maximum hydraulic operating pressure: 310 bar Maximum pneumatic operating pressure: 8 bar Run-out distance: 8 mm EQUIPMENT Rjdpsyybw Rjfx Ab Iebw Hydraulic RFA upper clamping Hydraulic WILA NS lower clamping Hydraulic CNC crowning

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW Servo-mechanical spindle press DESCRIPTION OF THE MACHINE – 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N. The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. On the horizontal arm, there is a movable press table that can be manually shifted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. Only in this position can the press head be lowered using the two-hand control system. Rbjdpfxjyya Ibj Ab Iew The control panel includes two-hand control buttons, an emergency stop switch, a table lowering button, and force selector switches 1 and 2. The force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press. It also runs on linear guides. The head is driven by a lead screw powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Year of construction: 1976, condition: used, Technical details: Rsdpfx Asyyapxjb Iobw diameter: 500 mm workpiece weight: 30 kg test dia. min.: 200 mm total power requirement: 0,03 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1x0,5x1,06 m

Condition: ready for operation (used), Eccentric press, Eisenwerk Hensel EBU 15, Used machine Manufacturer: Eisenwerk Hensel Model: EBU 15 Rsdpsxfk Adefx Ab Ijbw Dimensions: Width: 800 mm Depth: 1100 mm Height: 1800 mm Pressing force: 15 tons Stroke length: 4–70 mm Strokes per minute: 140 spm Table size: approx. 430 × 395 mm T-slot size: 165 × 160 mm Table height from floor: 560–735 mm adjustable Power consumption / motor: 1.0–1.2 kW Weight: 0.9 tons

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective Rsdpevr Hf Ejfx Ab Ijbw testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: new, Technical data: Pressing pressure max.: 5000 kg Projection: 315 mm Installation height: 800 mm Stroke: 530 mm Height: 1650 mm Punch thickness: 56 mm Table surface: 250 x 360 mm Recess in the table: 85 x 125 mm Turntable with 4 slots: ø 237 mm Weight, approx.: 145 kg Rodpfxeuxpwno Ab Isbw

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Ram size 300 x 280 mm Table size 500 x 800 mm Rbodjtt A T Topfx Ab Isw Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: good (used), pressing force: 80 t, throat depth: 400 mm, ram adjustment: 80 mm, Capacity: 80 Ton Table surface: 750 x 550 mm Ram Adjustment: 80 mm Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Complete with: - Pneumatic clutch Rjdpougtkxefx Ab Ijbw - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg

Condition: good (used), functionality: fully functional, pressing force: 110 t, working width: 3,100 mm, back gauge: 1,500 mm, distance between stands: 2,550 mm, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Rodpswi N T Ejfx Ab Ijbw Stroke length: 150 mm Throat: 250 mm Rapid approach speed: 100 mm/sec. Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8.700 kg

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Rbodjydpxvjpfx Ab Iew Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Electrohydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The above information is provided subject to change until the machine arrives at our warehouse. Rbsdpfxeyx Nubo Ab Iow Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2007, pressure 40 t stroke 12 - 100 mm no. of strokes 60 - 150 /min throat 220 mm dayligth 340 mm table surface area 650 x 480 mm ram surface 370 x 300 mm ram adjustment 70 mm power requirement 4,0 kW Weight 3,0 t dimensions (WxDxH) 1,2 x 1,5 x 2,3 m permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation Rjdpsyx Intofx Ab Iebw

Condition: used, Year of construction: 1973, pressure 40 t distance between columns 1150 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 630 mm ram surface 1000 x 1200 mm side window 705 mm power capacity 5,5 kW weight 9,0 t Dimensions (WxDxH) 2,35 x 3,8 x 3,55 m with swivelling ram, movable table, ejector in table Rjdpoyx Inmefx Ab Iebw

Condition: used, Year of construction: 1979, pressure 40 t distance between columns 620 mm stroke 975 mm distance table/ram, max. stroke up, adjustment up 940 mm table surface area 590 x 1000 mm table height over floor 770 mm ram surface 590 x 1000 mm side window 470 mm Rbodpfoyx Ingjx Ab Iew max. tool weight 2,5 t max. capacity of swivelling ram plate 1,5 t Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Working speed 0 - 10 mm/s oil volume 150 l power requirement 9,5 kW weight 3,2 t dimensions (WxDxH) 2,0 x 2,4 x 3,0 m with swivelling ram, movable table, ejector in table

Condition: used, pressure 160 t distance between columns 1360 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 620 mm table surface area 1300 x 900 mm table height over floor 950 mm side window 640 mm ram surface 1300 x 900 mm Rbjdpfxjyx Im Nj Ab Iow power requirement 45,0 kW weight 16,0 t Dimensions (WxDxH) 2,5 x 2,1 x 4,1 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop No foundation pit necessary

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop Rbodpfxeyx Im As Ab Ijw No foundation pit necessary

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 480 mm/s Rbodpjyx Imvsfx Ab Iew speed up 480 mm/s working speed 20 mm/s oil volume 115 l power requirement 7,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation No foundation pit necessary

Condition: used, Year of construction: 1976, pressure 032 t throat 280 mm stroke fix 140 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 370 mm table surface area 700 x 550 mm hole in the table 260 x 260 mm table height above floor 860 mm passage to the back 350 mm ram surface 320 x 300 mm ram adjustment 63 mm weight 3,0 t Dimensions (WxDxH) 1,2 x 1,4 x 2,4 m Rbsdpfxoyx Imie Ab Iow the press has a FIXED stroke permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch, FIX stroke, manual ram adjustment, motoric centralized lubrication, two-hand and foot operation can be offered with or without putting into operation in our warehouse