Used Test Press Heat for sale (32,402)

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Kljdpjx Eg Upefx Ahvep Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: like new (used), functionality: fully functional, machine/vehicle number: Geo Knight Maxi - Press, Year of construction: 2017, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press Kjdpfx Ahjv Dm Udevslp is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer Kedpfxsk S Dt Ts Ahvslp HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 193 kg, SEFA Duplex Pro V3 – Pneumatic Double Platen Heat Press – 2022 Pneumatic double platen / double workstation heat press SEFA Duplex Pro V3, manufactured in 2022, in excellent condition. Machine tested and cleaned, ready for immediate use. - Delivery no included Ideal for any professional textile marking workshop requiring high throughput and reliable performance. TECHNICAL SPECIFICATIONS - Brand: SEFA - Model: Duplex Pro V3 - Year: 2022 - Type: Pneumatic double platen heat press with lateral swing - Platen size: 40 × 50 cm (16 × 20 in) - Maximum pressure: 625 g/cm² - Maximum temperature: 220 °C - Power: 2,200 W - Power supply: 240 V single-phase - Maximum substrate thickness: 45 mm - Weight: 170 kg - Dimensions: 713 × 891 × 1,079 mm - 3 pressing modes: single platen / semi-automatic / full automatic - Independent pressing time per platen - 10 storable time/temperature programmes - Foot pedal control included as standard - Automatic head translation - ECO mode, standby mode, dual piece counter - Designed and manufactured in France APPLICATIONS Textile sublimation and rigid substrates, heat-seal flex and flock, screen-print transfer, laser transfer, DTF on garments and accessories, DTG pre-treatment drying. Klodpeyvh Rcsfx Ahvep CONDITION Tested, cleaned, excellent overall condition. Available immediately. Sold by Manutech-Print, professional reseller of textile printing equipment. Contact: manutech-print.com

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm Kledpfx Aogrkigehvop weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: good (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 423, roller width: 800 mm, We are offering this heating press from 1976 for sale. The press was in use until recently for vulcanizing tread segments for retreading wheel loader tyres. Included are also a considerable number of mould segments ranging from 420 to 750 mm in width. The press is electrically heated and has complete safety documentation. The heating surface is approximately 800x1100 mm. If you have any questions or require further information, please feel free to send us a message or call us. Klodpfxex Nqlvj Ahvep

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Kodpfouk I Nxex Ahvslp

Condition: excellent (used), functionality: fully functional, total height: 8,000 mm, installation height: 5,970 mm, total width: 6,000 mm, total length: 7,700 mm, table width: 3,500 mm, table length: 2,500 mm, table load: 59,000 kg, stroke length: 2,500 mm, pressing force: 300 t, Clamping force: 300 Ton Klsdpoymltusfx Ahvjp Opening force of movable platen: 100 Ton Operating pressure: 250 bar Platen dimensions: 3,500 x 2,500 mm Minimum mold dimensions (at max clamping force): 2,800 x 2,000 mm Minimum daylight between platens: 1,400 mm Height of clamping platen from foundation: 930 mm Movable platen stroke: 2,000 mm Sliding table stroke: 2,500 mm Tilting angle of oscillating table: 110° Max. upper mold weight: 24 ton Max. lower mold (sliding table) weight: 59 ton Ground clearance: 5,970 mm Overall height: approx. 8,000 mm Machine width: approx. 6,000 mm Machine depth: approx. 7,700 mm

Condition: ready for operation (used), Year of construction: 1990, Miller-Johannisberg 660 Specification Detail Process Heatset web offset printing Web Width 660 mm Cut-off 452 mm Colors/Units Typically configured with 5 printing units (works 4+4) Dryer VITS gas dryer Folder Capable of folding up to A5 size Controls Includes a control panel with register control Ksdpfoyk Eg Nex Ahvelp Tension control system Baldwin dampening Chiller unit, plus chilling system before folder

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press – versatile use as an assembly press, small batch press, manual loading press, vulcanizing press, or heating press, designed as a double-column press (H-frame construction). Inspection of the press is possible at the warehouse in Ennepetal. This is a 2.5-year-old, unused press with zero operating hours, being sold with full warranty. Technical details: - Robust machine frame - Capacity: 30 tons at 300 bar - Pump ASC: 28.5 liters/min. - Motor: 11 kW – 15 hp - Oil tank: 600 × 450 × 500 mm – approx. 100 liters - Cylinder piston: Ø 110 mm - Cylinder bore: Ø 70 mm - Stroke: 500 mm - Speed, forward: 45 mm/s - Return: 55 mm/s - Guide rods: Ø 50 mm - Table plate: 800 × 550 mm – with T-slots - Ram plate: 700 × 500 mm – with T-slots - Total weight: 2,000 kg - BoschRexroth valves - Control cabinet technology from renowned manufacturers - Press table size: 700 × 500 × 70 mm - Table height: 800 mm, measured from shop floor - Cylinder dimensions / piston rod: 110 / 75 mm - Ram size: 700 × 500 × 80 mm - Emergency stop switch - Rear protective enclosure made from painted mesh - Press area lighting - Rear and sides fully enclosed - 500 mm high light curtain with 14 mm resolution (finger protection) - Maximum distance between table and ram: 500 mm - Cylinder travel: 500 mm - Front open width: 820 mm - Pressing force adjustable by rotary knob from 5 to 30 T - Travel speed: downwards 50 mm/sec, upwards 40 mm/sec - Total weight approx. 2,000 kg - Finish in RAL 7035 (light grey) and RAL 2009 (orange) - Assembly, commissioning, and operator training available for an additional charge - CE declaration and German-language documentation - Ram plate guided by two pillars - Resettable piece counter - Position limit via cam switch - Adjustable two-hand control with 3 m cable - Safety inspection with certificate from an authorized specialist company - The right side features movable sensors for stroke limitation. This allows a specific stroke, e.g., 300 mm, to be set. The press will then automatically move to the preset point at the push of a button. - The ram plate is guided by two columns. - The rear of the press is enclosed, but fitted with air outlets. - The table features an ejection chute. - Light barrier with anti-reach-under protection. - Mountable anti-reach-over guard. - Optional: 2 heating plates, 500 × 500 mm heating surface each, total size 550 × 550 mm, with controller, up to 200°C, incl. 20 mm thick insulated plate, with timer - Optional: Installation and training Kljdpsu U Ey Isfx Ahvsp Delivery times: Currently, a lead time of approximately 6 weeks is to be expected (without heating plates). Heating plates delivery time approx. 8 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Condition: good (used), functionality: fully functional, total height: 3,300 mm, table height: 850 mm, installation height: 1,000 mm, total width: 850 mm, total length: 950 mm, pressing force: 50 t, overall weight: 4,500 kg, The cylinder has been completely overhauled. Kljdeyh Rfpspfx Ahvep

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. Kedox Apntepfx Ahvelp The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price.

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Klsdpfx Aedvltyohvop Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Kljdpfx Asdwh E Ashvep Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and a modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the one-size-fits-all solution for every application. The display is user-friendly. Intended Use: This heat seal press is particularly suitable for industrial applications that require precise temperature control and the ability to use smaller sealing plates (140 x 140 mm). Common applications include applying patches, transfers, or embroidery to textiles. Special Features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as other industries that require high-volume, medium- to high-temperature processing. High flexibility: The temperature range of 25 to 210°C and the adjustable timer from 1 to 240 seconds offer flexibility for a wide variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat seal press with the following technical specifications: Technical Data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (mm): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) Klodpfx Ajwif Rgjhvsp We are happy to answer any further questions you may have over the phone.

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Kledpfx Ahsxb Nv Ujvep Determination of compressive strength

Condition: used, Year of construction: 2013, operating hours: 1,500 h, functionality: fully functional, Water heated hyrayulic Press 9 storey (cutom made) Klodpfxjwiuxmj Ahvep Stainless Steel Plates 3,50m x 2,30m/each

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Klodpfx Ahjxur Ndsvep Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Kedpew Hwp Nefx Ahvjlp

Year of construction: 1998, condition: excellent (used), table height: 2,250 mm, table width: 4,000 mm, Extra large heat press! For sale in excellent technical condition. Klsdpfx Aowfp R Ashvsp

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Heating system: Infrared Overall dimensions: Width: 4000 mm Depth: 2600 mm Height: 2000 mm Kodpfx Aew A Rdrehvolp

Condition: good (used), Resato HBU-B160 Gas High-Pressure Workshop Test System Kedpfjr Hmihex Ahvjlp The oil and gas industry revolves around the production of crude oil and natural gas. One of the challenges is to optimally utilize the equipment to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing guarantees the quality and safety of oil and gas production components. The well is stimulated by injecting a chemical fluid. High-pressure systems control and regulate back pressure and fluids with the control system. This allows oil and gas to be produced more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc / Max. pressure: 7 bar 2 x Gas cylinder holders 3 x Gas cylinder trolleys Digital control panel missing Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Used electrically heated pressure vessel with agitator Item number: 10256 Last use: Chemistry Volume: 280L Type: Upright on feet Material (wetted parts): 1.4301 stainless steel Bottom: dished bottom Top: dished bottom with flange ring Operating pressure according to type plate: +3Bar Operating temperature: Max. 90°C Tank dimensions: Inner diameter: 560mm Outer diameter: 580mm Height of the feet: 260mm Distance from drain to floor: 365mm Total height: 1540mm Materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Klsdpfx Ahed Dwi Hovop Double jacket around cylinder and bottom electrically heated Agitator in upper base, speed adjustable Top floor completely removable Various connections Sight glass in cylinder

Condition: good (used), Used pressure vessel / Electrically heated SKU: 10407 Last use: Cosmetics Volume: 695 litres Type: Standing on 3 feet Material (media contact): 1.4404 stainless steel Design: Single-walled / Insulated / Electric Heating Ksdpfsd R Hgkex Ahvjlp Manhole: 345mm Bottom: Curved Upper floor: Curved Operating pressure according to type plate: - 1 / +3 bar Test pressure according to type plate: 8 bar Maximum operating temperature: +152°C Dimensions of containers: Outer diameter: 820mm Cylindrical height: 1220mm Height of feet: 750mm Distance outflow to ground: 800mm Total height: 2040mm Total width: 1000mm Materials: Inside: 1.4404 / AISI316L Exterior parts: 1.4301 / AISI304 Facilities: Nameplate: yes Outlet: DN 65 Various connections Isolated Electrically heated Actuator

Condition: used, Used agitated tank with insulation Previous application: Pharmaceuticals Item number: 10785 Volume: 300 liters Type: Standing on 4 castors Product-contact material: 1.4571 / AISI316 Design: with insulation Operating pressure (as per nameplate): +0.5 bar Max. operating temperature: +95°C Tank dimensions: Manway: 410 mm Internal diameter: 700 mm External diameter: 800 mm Foot height: 870 mm Total height: 1700 mm Total width: 870 mm Total length: 950 mm Cylindrical height: 650 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Kjdpfjx Ewqdex Ahvjlp Outlet diameter: DN25 Distance from outlet to floor: 365 mm Propeller agitator Empty weight: 184 kg