Straightening Press - Horizontal

WAGNER DORTMUND VWG

Condition: excellent (used), Year of construction: 2006, STAR ECAS-32T CNC lathe TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Iodpfx Adou Hkg Tjnea Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA OFFER SCOPE U.A: (list not exhaustive): STAR ECAS 32 CNC automatic lathe Barload bar loader Siemens fire extinguishing system Tool holder set Chip tray and coolant pump High pressure pump transformer Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm Iedjfxygwepfx Adnja pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Power on: 64,668 hrs Standard tornos bar feed (5ft) 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Isdpfowa D Tujx Adnea Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3001) contact us for more details

Condition: used, Scale with maximum capacity 6 tons, minimum 40 kg, overall dimensions 610 x 110 cm, h. 90 Iedpfx Adspfp Dvonea

Condition: used, Year of construction: 1984, pressure 10 t distance between columns 500 mm stroke 200 mm Isdpfx Ajt Hwwdsdnsa total power requirement 10 kW weight of the machine ca. 4.500 kg dimensions of the machine ca. m