Used Electromagnetic for sale (327)

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Hsdob Dxnwopfx Afhonk Powder combustion furnace Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: new, Year of construction: 2025, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. powder coating booth, open spray booth The overspray during powder coating is collected by the suction unit. The powder spray booth is supplied on castors and is therefore mobile. Hedjffwfxopfx Afhjnk - The extraction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. 1 Dimensions of the powder level Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 2. powder combustion furnace 1 Internal dimension length 4,000 mm 2 Inner dimension width 1,500 mm 3 Internal height 2,200 mm 4 External dimension incl. thermoblock length 5,250 mm 5 External dimension incl. thermoblock width 2,050 mm 6 External dimension incl. thermoblock height 2,530/2,750 mm 3. switch cabinet 4 Manual conveyor system The "Mantion system" conveyor technology is designed for max. 250 kg per product carrier and 750 kg/ trolley.

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: Hsdpjx Rdn Tjfx Afhjnk 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: used, Year of construction: 1996, Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm Hnedpfok Abn Ssx Afhjk effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2000, Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sound pressure level is below 70 db(A) Conveyor belt 1390-700-590 and SEW gear motor with brake Conveying length (FL): 1390 mm effective width (NUB): 700 mm belt width (GB): 590 mm Motor Type: SEW Gearmotor with brake Hsdpfok Aa Rksx Afhjnk Motor Power: kW 0.55/0.55 S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min total weight: 190 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 1997, condition: ready for operation (used), Color: RAL 7035 light grey, RAL 7012 basalt grey, RAL 5012 blue grey, the machine’s inverter is defective. Accessories: electromagnetic clamping plate 400x250mm, with pole pitch 5mm and holding force control, automatic vertical infeed with infeed program and digital display for vertical and cross movement, automatic central lubrication system, wet grinding unit with paper belt filter system for filter paper 460x200mm with filter fineness 0.016–0.025mm, electric wheel dresser with dimensional compensation and operating manual. An on-site inspection is possible. Hjdpfjylbrwjx Afhsnk

Year of construction: 2007, condition: good (used), Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automatically isolates nucleic acids within one hour. Viral RNA from 96 nasal swabs can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput nucleic acid (DNA/RNA) isolation. It utilizes patented Magnetic Bead Technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and resuspend the bound particles. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Sample Volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing Time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: Particle resuspension is achieved by rotating the metal rods at up to 2,000 rpm, enabling high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automated sample tracking. Software: The system is controlled by chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma System Components Actuators: High-precision linear axes for vertical movement and a rotary axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Software: chemagic QA software (LIMS-compatible, logging, user management) Special Features Hsdpfxsyk Uu No Afhjnk Cross-contamination protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Probe heads: 96 Sample volume: 10 - 400 μL Number of samples: 1 to 96 samples TFT monitor, keyboard, and mouse Year of manufacture: 2007 Dimensions & Setup Basic machine (W/D/H): approx. 600 x 640 x 950 mm. Carrier axis (W/D/H): 1940 x 170 x 200 mm (with full expansion and rail system). Total space requirement: A fully configured system can require up to 2000 x 740 x 800 mm (L/W/H). Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, This listing serves exclusively for informational purposes and does not constitute a legally binding offer. The KINGWAY WE500 electric wheelbarrow is a modern and environmentally friendly solution for the fast and comfortable transport of materials in demanding conditions. Thanks to its compact dimensions and well-thought-out design, the WE500 is ideal for use in narrow passages, gardens, construction sites, warehouses, and many other locations where mobility and safety are crucial. TECHNICAL DATA: Hedpjyk S Rbjfx Afhjnk Model: DR-MD-02 Maximum working time: 8–10 hours Brake system: Electromagnetic brake Loading volume (L × W × H): 1050 × 720 × 400 mm Charging time (from full discharge): approx. 12 hours Travel speed (forward/reverse): 5.0 / 3.0 km/h Wheels: Front: 16×5.5-8, tubeless Rear: 13×5-8, tubeless Gross/net weight: 723 / 715 kg Transport dimensions: 1340 × 830 × 880 mm Maximum load capacity: 500 kg Motor power: 1000 W / 48 V Battery: 4 × 12 V, 32 Ah Free 12-month warranty – after this period, we offer all spare parts as well as professional service if required. PRICE: €1,600 NET €1,904 GROSS

Condition: new, Year of construction: 2026, A mast trolley with an electric drive, a load capacity of 1,500 kg and a lifting height of 3,500 mm, is an ideal warehouse device for transporting heavy loads. Solid steel construction ensures stability when lifting. Polyurethane rollers facilitate movement on uneven surfaces. Thanks to this, the mast trolley allows you to quickly and safely move loads at various levels and in various conditions. Introduction to electric mast pallet trucks The CORMAK Q15E35 electric mast lift truck is a versatile and efficient solution for material handling and lifting to a height of 3.5 m. Thanks to its innovative design and advanced technology, this trolley is ideal for use in warehouses, production halls and distribution centers. Key advantages of a pallet lift truck with a capacity of 1,500 kg The technical specifications of this model include the ability to lift to an impressive height of 3,500 mm, which enables efficient manipulation of loads at various levels. The trolley's load capacity is 1,500 kg, which makes it an excellent tool for handling medium and heavier loads. Machine features Hnedpforh E D Uox Afhjk A solid structure made of high-quality steel ensures greater stiffness and stability when lifting. Thanks to the use of a special system, the handle of the pallet truck allows the steering to be transferred directly to the wheel. Built-in rectifier. Lifting the forks to the maximum height without load - only 25 seconds! Maintenance-free motor with brushless technology. Battery charge indicator on the control box. Safety switch. Built-in controller protects the battery against discharge or damage. Sealed, maintenance-free AGM battery. WE DO NOT REQUIRE inspections during the warranty period. Technical parameters MAX LIFTING HEIGHT 3500mm CAPACITY 1500 kg CENTER OF GRAVITY 600mm FORK LENGTH 1150mm OUTER FORK WIDTH 570mm HEIGHT WITH FORKS LOWER 2330 mm HEIGHT OF RAISED MAST 4000mm HEIGHT OF LOWER FORKS 85mm TOTAL WIDTH 810mm TOTAL LENGTH 1745mm CLEARANCE 30mm TURNING RADIUS 1390mm TRAVEL SPEED WITH / WITHOUT LOAD 3.5/4 km/h LIFTING SPEED WITH/UNLOAD 140/200 mm/s LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 5/7% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING ENGINE POWER 2 kW BATTERY VOLTAGE/CAPACITY 12V 75 I 120 Ah WHEEL MATERIAL Polyurethane LIBRA 586 kg

Condition: new, Year of construction: 2026, The electric mast pallet truck is a reliable and advanced device that ensures comfort and efficiency in moving loads weighing up to 1,200 kg. Hodpferh Expsx Afhonk Product characteristics: In the initial phase of the Q12E16 electric mast trolley project, we had one goal - to create a work tool that would enable loading and unloading of goods in tight spaces. That's why we decided on compact dimensions and a load capacity of up to 1,200 kg, which allows it to work in conditions where it is difficult for other devices to move. To the already established goals, we added lifting to a height of 1600 mm and two operating modes: fast and "turtle". Greater stiffness and stability when lifting translates into work safety and allows for trouble-free movement of difficult goods, which is due to its solid structure made of high-quality steel, which translates into a longer service life of the trolley. The safety switch is essential to protect the operator and the device. We do not require inspections during the warranty period, which means that our Q12E16 device is not only reliable, but also economical in operation. All these functions and features translate into efficient and safe work. The AGM battery has a lower self-discharge than traditional lead-acid batteries, which means that the Q12E16 mast truck is ready for operation immediately after charging. Additionally, the AGM battery is sealed, which eliminates the risk of acid leakage and makes it easier to transport and maintain. We decided to use it because it is more resistant to extreme temperatures, impacts and vibrations. The built-in charger allows you to charge the battery anywhere you have access to a power socket. Thanks to this, the operator can charge the battery during breaks at work or while transporting the device, which allows for continuous and effective work. LED battery indicator that informs the operator about the current battery charge level, so the operator can monitor the battery status and charge it at the right time to ensure continuous and efficient operation. Additionally, the Q12E16 mast trolley is equipped with a "belly" safety switch that protects the operator against dangerous situations, such as being run over by the trolley. Technical parameters MAX LIFTING HEIGHT 1600 mm CAPACITY 1200 kg CENTER OF GRAVITY 600 mm FORK LENGTH 1150 mm EXTERNAL FORK WIDTH 550 mm HEIGHT WITH FORKS LOWER 2080 mm HEIGHT OF RAISED MAST 2080 mm HEIGHT OF LOWER FORKS 85 mm TOTAL WIDTH 790 mm TOTAL LENGTH 1800 mm CLEARANCE 30 mm TURNING RADIUS 1390 mm TRAVEL SPEED WITH / WITHOUT LOAD 3.5 / 4.0 km/h LIFTING SPEED WITH/UNLOAD 100/200 mm/s LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 3/10% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING SYSTEM MOTOR POWER 2.2 kW BATTERY CAPACITY 12V 75Ah 2 pcs WHEEL MATERIAL Polyurethane WEIGHT 380 kg

Condition: new, Year of construction: 2026, The Q12E30 electric mast truck is an ideal device for loading and unloading goods. The load capacity of 1,200 kg and electric lifting up to 3 meters allow you to stack goods quickly and safely. Characteristics of the Q12E30 trolley: The Q12E30 electric mast trolley is an advanced technological solution that is very simple to operate. As standard, it has built-in safety functions such as a safety switch and overload valves. The high-mast mast trolley is made of the highest quality materials that ensure stiffness and stability during lifting and transport. It has a built-in LED battery charge indicator and a built-in charger with a charger. The heart of this stroller are sealed and maintenance-free AGM batteries, which ensure reliability and greater efficiency of the stroller. During the warranty period, we do not require periodic inspections to maintain the warranty, which significantly facilitates the operation of the truck and saves costs. By providing devices of the highest quality and efficiency, we focus on innovation and customer satisfaction. The Q12E30 mast trolley is an example of advanced technology that, on the one hand, ensures work safety and, on the other hand, speeds up warehouse processes. Extremely durable and abrasion-resistant wheels and rollers are made of polyurethane. Thanks to the use of this material, they are characterized by an exceptionally long service life and resistance to various types of mechanical damage. Technical parameters MAX LIFTING HEIGHT 3000 mm CAPACITY 1200 kg CENTER OF GRAVITY 600 mm FORK LENGTH 1150 mm EXTERNAL FORK WIDTH 550 mm HEIGHT WITH FORKS LOWER 2080 mm HEIGHT OF RAISED MAST 3550 mm Hodporh Ey Uofx Afhjnk HEIGHT OF LOWER FORKS 85 mm TOTAL WIDTH 800 mm TOTAL LENGTH 1800 mm CLEARANCE 30 mm TURNING RADIUS 1390 mm TRAVEL SPEED WITH/UNLOAD 3.5/4 km/h LIFTING SPEED WITH/UNLOAD 100/200 mm/s LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 3/10% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING SYSTEM MOTOR POWER 2.2 kW VOLTAGE / BATTERY CAPACITY 12V 85Ah 2 pcs. WHEEL MATERIAL Polyurethane WEIGHT 460 kg

Condition: new, Year of construction: 2026, Grinding machine for continuous operation in production. Broad grinding range and programmable PLC SIEMENS controller. The machine has a modern, sturdy design. Its headstock operates on two pairs of guides. Automatic feeds for 3 axes. By default comes with a digital display. Machine features Automatic feeds for 3 axes Digital display Sturdy structure Very high accuracy Technical data Magnetic table dimensions 200×500 mm Table load capacity 160 kg Grinding wheel dimensions 200×20×31.5 mm Grinding wheel speed 2850 rpm Maximum distance from spindle axis to table 450 mm Table travel speed 7–25 m/min Automatic transverse feed 0.1–8 mm Rapid transverse feed 990 mm/min Y-axis scale gradation 0.02 mm Z-axis scale gradation 0.005 mm Rapid vertical feed 480 mm/min Automatic vertical feed 0.005–0.05 mm Manual vertical feed 1 mm/rev. Spindle motor power 2.2 kW Base dimensions 2300×2150 mm Weight 1600 kg Hsdpfxekkdfle Afhenk Default equipment Digital display for 3 axes 200×500 mm electromagnetic table Grinding wheel Arbor for wheel balancing Grinding wheel fixture Set of tools 24V lighting Cooling system User manual EC declaration of conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The electric pallet truck is a compact and efficient transport device with a load capacity of 1500 kg, ideal for use in warehouses and distribution centers. Equipped with a turtle mode and a removable battery, its solid construction and modern solutions make this truck a reliable tool for efficient logistics. The battery is placed under a cover, which protects it from damage and dirt. The design of the truck allows for easy battery removal, which significantly simplifies its replacement or charging outside the device. This solution allows for quick preparation of the truck for further operation, eliminating the need for long operational downtimes. The electric pallet truck is equipped with polyurethane wheels that are highly resistant to wear and provide excellent traction on the ground. Additionally, the polyurethane rollers enhance stability and smoothness of movement, reducing noise and providing better traction, especially on smooth warehouse floors. The maximum incline the device can move on is 8% with a load and 16% without a load, allowing for its use in various conditions. Weighing 115 kg, the electric pallet truck is stable while still being light enough to allow for easy operation. Its solid construction and the high-quality materials used in production ensure durability and resistance to mechanical damage. Standard equipment includes turtle mode, which allows for precise maneuvering in restricted spaces. This function is especially useful when working in narrow warehouse aisles, loading ramps, or areas with limited movement. Turtle mode reduces the speed, increasing control over the truck and minimizing the risk of collisions. Importantly, when operating in turtle mode, the truck can be operated with the handle in a vertical position, further facilitating maneuvering in hard-to-reach places where the traditional handle position might limit the operator’s freedom of movement. Thanks to this feature, the electric pallet truck offers greater precision and additional safety in demanding operating conditions. This modern transport truck is perfect for use in intensively operating warehouses, industrial plants, and wholesale centers, where speed and safety of pallet transport are crucial. Thanks to the use of modern technology, the device combines high efficiency, compact dimensions, and reliability, making it an ideal choice for companies looking for effective logistics solutions. Technical Specifications: Load capacity: 1500 kg Hedpfx Aowaypxefhsnk Turning radius: 1400 mm Lift height: 190 mm Lowered fork height: 80 mm Fork length: 1150 mm Fork width: 560 mm Wheel diameter: 80/190 mm Battery voltage/nominative capacity: 48/10 V/Ah Li-ion (equivalent to 24V/20Ah) Working time on a fully charged battery: up to 3 hours Charging time: 2.5 hours Drive motor power: 0.75 kW Lifting motor power: 0.8 kW Brake: Electromagnetic Speed with load/without load: 4.5 / 5 km/h Maximum slope, with load/without load: 8/16% Wheel type: Polyurethane Weight: 115 kg Dimensions: 1566x685x1200 mm

Condition: new, Year of construction: 2026, The electric pallet truck with electronic scale is a modern device for transporting and weighing loads up to 2000 kg. Equipped with potentiometer control and turtle mode, it ensures precise maneuvering and safe work in tight spaces. Thanks to the built-in electronic scale, it allows for quick and accurate weighing of goods during their movement. The solid construction and reliability make it an ideal choice for intensive use in warehouses and logistics centers. The truck does not require UDT authorizations or inspections. Technical parameters Capacity 2000 kg Hodpfx Aericv Nefhonk Turning radius 1300mm Fork height raised 90mm Fork lowered height 200mm Fork length 1150mm Fork width 550mm Battery voltage/nominal capacity 2x12v/65Ah Drive motor power 0.75kW Lifting motor power 0.8kW Brake electromagnetic Travel speed with/without load 4.5 km/h Maximum ground gradient, loaded/unloaded 3/5% Length / width / height 1620x570x1225mm Weight 173kg

Condition: new, Year of construction: 2026, Main Advantages of the CORMAK 660 × 2000 Universal Lathe Electromagnetic foot brake ensures maximum safety and significantly reduces downtime by allowing fast and reliable stopping of the machine. Rapid longitudinal and cross feeds considerably shorten tool travel time, increasing machining efficiency and operator comfort. Universal application – external and internal turning, taper turning, threading (metric, inch, module, DP), drilling, broaching, and polishing. Hardened and ground cast iron bed (400 mm wide) provides maximum vibration reduction and high machining accuracy. Large spindle bore Ø105 mm and D1-8 camlock spindle nose enable machining of shafts and large-diameter components. High drive power – 7.5 / 9 kW spindle motor ensures stable performance during heavy-duty cutting operations. Wide threading range without changing change gears, saving time and increasing production flexibility. 3-axis Digital Readout (DRO) enhances precision of settings and overall turning process control. Standard Equipment 3-axis digital readout (DRO) 315 mm 3-jaw chuck 400 mm 4-jaw chuck 400 mm faceplate Fixed steady rest and traveling steady rest Cooling system and work light Polish user manual and CE declaration Optional Equipment Set of turning tools 25 × 25 mm – 7 pcs Precision live center MT5 Grinding attachment for shafts and bores Coolants and cutting oils Technical Specifications Swing over bed: Ø 660 mm Swing over cross slide: Ø 455 mm Swing in gap (diameter × width): 885 × 170 mm Center height: 330 mm Distance between centers: 2000 mm Bed width: 350 mm Maximum tool size: 25 × 25 mm Total cross slide travel: 355 mm Total compound slide travel: 130 mm Spindle bore: Ø 105 mm Spindle nose: D1-8 Spindle taper: Ø 113 mm (1:20) Number of spindle speeds: 12 Spindle speed range: 25–1500 rpm Leadscrew diameter and pitch: Ø 40 mm × 6 mm Inch thread range: 2–112 TPI (60 ranges) Metric thread range: 0.2–14 mm (47 ranges) DP threads: 4–112 DP (50 ranges) Module threads: 0.1–7 MP (39 ranges) Longitudinal feed: 0.059–1.646 mm/rev (35 ranges) Cross feed: 0.020–0.573 mm/rev (35 ranges) Tailstock quill travel: 180 mm Tailstock quill diameter: Ø 75 mm Tailstock taper: Morse taper No. 5 Hedpfx Aeyk Dabefhenk Main spindle motor: 7.5 kW (10 HP), 3-phase Coolant pump motor: 0.1 kW (1/8 HP) Required installation space (L × W × H): 334 × 115 × 151 cm Packing dimensions (L × W × H): 340 × 115 × 182 cm Weight: 3200 kg

Condition: new, Year of construction: 2026, grinding length: 560 mm, grinding width: 240 mm, total height: 2,150 mm, total length: 2,250 mm, total width: 1,720 mm, workpiece weight (max.): 180 kg, feed rate X-axis: 25 m/min, grinding wheel diameter: 220 mm, distance table to spindle center: 450 mm, table length: 508 mm, type of input current: three-phase, table width: 200 mm, grinding wheel width: 20 mm, overall weight: 1,800 kg, rotational speed (max.): 2,850 rpm, power: 5 kW (6.80 HP), input voltage: 400 V, Equipment: documentation/manual, Siemens PLC control Touchscreen Electronic handwheel Digitally controlled automatic vertical feed with servomotor SINO 2-axis digital readout Electromagnetic clamping plate Cooling system LED lighting Grinding wheel Flange Central oil lubrication Table size ----- 200 x 508 mm T-slot width / quantity ----- 14 / 1 mm Electromagnetic clamping plate ----- 200 x 460 mm Max. longitudinal travel of table ----- 560 mm Max. cross travel of table ----- 240 mm Table speed, hydraulic ----- 5~25 m/min Max. distance spindle - table ----- 450 mm Max. permissible workpiece weight ----- 180 kg Grinding wheel ----- 220 × 20 × 31.75 mm Cross travel Automatic feed, cross ----- 0.2~8 mm / stroke Rapid traverse, cross ----- 990 mm/min Feed per handwheel revolution, cross ----- 4 mm/rev Handwheel graduation ----- 0.02 mm Vertical travel Automatic feed, vertical ----- 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid traverse, vertical ----- 480 mm/min Feed per handwheel revolution, vertical ----- 1 mm/rev Handwheel graduation ----- 0.005 mm Hnsdpfjykvkxsx Afhjk Main motor ----- 2.2 kW Hydraulic pump motor ----- 0.75 kW Vertical feed motor ----- 0.5 kW Weight ----- 1800 kg Machine dimensions ----- 2250 x 1720 mm

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) Hnsdeykudkopfx Afhek F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA06, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm Hnedpfx Ajykua Ssfhsk -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: good (used), Year of construction: 2000, CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 grinding range : 600X270mm Hsdpofrbckjfx Afhsnk Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Hnedpfx Afoxbfutohok

Condition: used, Year of construction: 2011, - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods on all axes - Ball screws - Hydraulic tool retractor - AC servo feed motors Hnodpfx Afewf Ntqohjk - Sliding doors with safety glass - Universal milling head - Hardened guideways - Plastic-coated counter guide - Electromagnet. Main spindle brake - Automatic central lubrication system - Integrated coolant system - Steel telescopic cover for transverse travel - Steel telescopic cover for longitudinal travel - Work light - Year of manufacture 2011 Specifications Worktable: - Table clamping area: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel paths: - X-axis - Longitudinal travel: 1250 mm - Y-axis - Transverse travel: 540 mm - Y-axis - Transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and column: 500 mm Column: - Z-axis - Vertical travel: 550 mm - Distance between spindle nose and table with vertical head position: approx. 50 - 600 mm - Distance between spindle nose and table with horizontal head position: approx. 360 mm 910 mm Milling spindle: - Tool holder: DIN 2080 ISO 50 - Speed range: 40 - 2000 rpm Feeds and rapid traverse rates: - Longitudinal/transverse feed: 4000 mm/min - Vertical movement (column): 2000 mm/min - Rapid traverse longitudinal/transverse: 4000 mm/min - Rapid traverse vertical: 2000 mm/min Motors: - Milling spindle motor: 11 kW - Feed motors for X/Y/Z axes: 1.5 kW each - Coolant pump: 0.12 kW - Lubricant pump: 12 W Installation: - Dimensions W x H x D: 3000 x 1880 x 2660 mm - Net weight of the machine: approx. 3800 kg

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Available immediately! Hnedjpq R Rdepfx Afhek Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout - 5-Position Longitudinal Stop for the Saddle - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Hnsdpfxeim Ik Ss Afhjk Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Filling valve diameter: Ø12mm Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery directives CE compliant Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation Force shunt free current transfer at the load cell Front protection to reduce interference on the weighing result Stainless steel control cabinet Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution Flexible operability due to tiltable stainless steel operator terminal Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III Tandem design Max. Label height: 120mm  Photocell for label scanning 2 x automatic winding station incl. counter pressure plate Mounting device with height adjustment for lateral label dispensers With adjustable side guides - passage width up to 150mm Hsdpfxsmfqm Dj Afhenk

Condition: used, Year of construction: 2019, Overview  This semi-automatic bag filler was manufactured in 2019 by Spain-based Cartobol. The machine is available for sale because the owner purchased a more advanced model to improve production. It is available promptly. Technical data  Capacity: Up to 600 bags/h (3L) 510 bags/h (5L) 390 bags/h (10L) 360 bags/h (15L) 300 bags/h (20L) Formats: 3L – 20L Bag-in-Box (individual and web bags) Dimensions: 0.73m x 0.93m x 1.85m Weight: 156 kg Pressure: Min. 6 Bars Voltage: 220V Intensity: 6 A Construction: Stainless steel frame and rollers, mobile on wheels Filling system: High-precision electromagnetic flowmeter Pump: Stainless steel centrifugal pump (8,000 L/h) Control: PLC with 7" touch screen Features: Automatic CIP cleaning system Optimized filling with load cells Fast format change Low air content inside bags Hjdpfx Aswi Txlefhonk