Used Electromagnetic Table for sale (17,330)

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm Fjdpfozwuu Ijx Albegg 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: used, Year of construction: 1967, Year of Manufacture: 1967 Machine / Serial No.: 72882 Country of Manufacture: Germany Manufacturer: Praehomawerk Kehren & Co., Hennef/Sieg Model: RW 6 Machine type: Rotary table surface grinding machine Grinding method: Surface grinding with rotary table Grinding spindle arrangement: Horizontal spindle Control: Conventional / manual Rotary table diameter: 600 mm Magnetic chuck: Electromagnetic rotary table Grinding height: approx. 350 mm Maximum workpiece diameter: approx. 650 mm Fedozvfi Hspfx Albogg Grinding wheel diameter: approx. 400 mm Grinding spindle speed: up to approx. 3,000 rpm Grinding spindle motor power: approx. 5.5–7.5 kW Vertical adjustment: Manual / powered vertical adjustment Table rotation: Powered rotary table Coolant system: Included Grinding wheel dressing: Manual dressing arrangement Machine operation: Conventional push-button control Operating hours shown: approx. 11,350 h Machine length: approx. 2,500–3,000 mm Machine width: approx. 2,000–2,300 mm Machine height: approx. 2,700–3,000 mm Machine weight: approx. 3,500 kg

Condition: new, planing width: 800 mm, Electric table lift, two motor speeds 1/6 mm/s Automatic adjustment of the table to the specified position Feed table – length 1200 mm 1 grooved roller at the inlet 2 feed rollers at the outlet Automatic star/delta motor start Electromagnetic brake Electronically controlled continuous adjustment of the feed belt speed 4 – 19 m/min 4-knife planing roller, Ø 150 mm Segmented pressure segments at the inlet, pressure bar at the outlet 4-point table mounting Workpiece thickness 3 - 300 mm Dust extraction nozzle with outlet, Ø 180 mm Knife setting gauge Noise protection Standard packaging in PE film Machine built according to CE electrical and safety standards Optional equipment: Motor 20 hp (15 kW) Fedpfx Ajittnpelbegg Segmented grooved feed roller Two relief rollers in the table Two rubber-coated outlet feed rollers Milling roller, type "Tersa" - available from stock in Haldensleben

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Fgsdpfx Alszz Hhnebeg Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Fedpfx Alsx N I Alobegg Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: good (used), Year of construction: 2012, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From insolvency: Gillardon GB 40 VE Year of manufacture: 2012 No. 4519-130-3913 electromagnetic feed 0.1/0.16/0.25 on the cross lever via push button Infinitely variable spindle speeds from 60-1600 rpm 2-speed motor work light emergency stop button 200mm quill travel 350mm throat depth table size 630x535mm – clamping surface 400x500mm Fgodpfxotw Rk Ts Albeg MK 4 taper – with Röhm keyless chuck 3-16mm machine height 2060mm – weight approx. 480kg The machine runs very smoothly and precisely Table and columns with visible signs of use Digital speed display non-functional + vice Cekaba-Bon 230mm

Condition: used, Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Fodpfx Aezzv Rfolbegg Rolls width: 450 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle has been completely overhauled! Fodpfezwd Htox Albjgg TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Tool holder: SK 63 Max. tool diameter: 150 mm Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Rapid traverse X/Y/Z: 60,000 mm/min Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Fsdpfetddw Aex Albsgg Hydraulic lift, lifting capacity around 1 ton.

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. Fgsdpfx Asw U A Rmjlbeg For more information, please contact us.

Condition: good (used), Year of construction: 2000, bore capacity in steel (diameter) 36.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 65 - 2000 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features: Fgedpszzrfxefx Albog - Robust column drill press (V-belt drive) - Electromagnetic feed clutch = spindle feed * with overload protection and electric cross-handle control - mushroom-head pushbutton (latching) for EMERGENCY STOP * located on the front panel - continuously variable speed control - clockwise rotation of the drill spindle - Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable - Separate coolant system, with reservoir - Operating instructions in German

Condition: used, Year of construction: 1980, functionality: fully functional, For sale is a gear hobbing machine. Manufacturer: LIEBHERR Table diameter: 315 mm Table hole diameter: 80 mm Maximum gear diameter: 300 mm Hobbing length: 225 mm Fgjdszz I Naopfx Albeg Maximum module: 6.0 Hobbing length: 225 mm Maximum diameter of hob tool: 140 mm Maximum length of hob tool: 152 mm Maximum length of workpiece: 680 mm Minimum number of teeth cut: 4 Machine dimensions: 3.3 x 1.9 x 2.2 m Machine weight: approx. 6.0 t

Condition: good (used), Year of construction: 1991, functionality: fully functional, ELB OPTIMAL Surface Grinder – Magnetic Chuck – Year of Manufacture 1991 Technical Data Manufacturer: ELB-Schliff Model Series: OPTIMAL Year of Manufacture: 1991 Grinding Area approx. 600 × 375 mm Magnetic Chuck approx. 600 × 350 mm Max. Workpiece Height approx. 375 mm Hydraulic Table Drive Electric Vertical Feed Coolant System Fsdpfx Ajzhgxyelbogg Electromagnetic Chuck 400 V Description Well-maintained ELB precision surface grinder made in Germany. The machine features a magnetic chuck, hydraulic table feed, and an integrated coolant system. It is ideally suited for toolmaking, mold making, and machine building, as well as for training and maintenance workshops. Visually in good condition. Inspection possible by appointment.

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Fsdpfoxw Uqvox Albogg Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Fedpfezwmn Tex Albjgg Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Fedpfozx Anfex Albogg Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: good (used), Year of construction: 2019, power: 5.5 kW (7.48 HP), For sale is a robust and precise Felder K 540 S panel saw, manufactured in 2019. Technical specifications: + Manufacturer: Felder + Type: K 540 S Fsdpfxezz Nrcs Albsgg + Year of manufacture: 2019 + Sliding table length: 3,200 mm + Cutting width with parallel fence: over 1,300 mm + Motor power: 5.5 kW + Voltage: 400 V + Maximum saw blade diameter: approx. 400 mm + Maximum cutting height: approx. 140 mm at 90° + Saw unit can be tilted from 90° to 45° + Precise Felder X-Roll sliding table + CE marking + Made in Austria A powerful panel saw for carpentry workshops, joineries and professional interior design. Inspection possible by prior appointment. Subject to prior sale and errors. Price: €5,831 including VAT - €4,900 net.

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Model: T150 Class Year of manufacture: 1993 Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Fgjdpfjyx Nadsx Albeg Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, without warranty or guarantee

Condition: used, Year of construction: 2025, New demonstration machine! Price on request! The CONTROL has always defined its own class – the premium class for vertical panel saws. But even this leading position doesn't stand still. We have developed the CONTROL into the premium class's vertical cutting center, with increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved ease of operation in every detail. Saw frame: • Machine components manufactured to a precision of 1/100 mm • Solid, self-supporting, firmly welded, and torsion-resistant saw frame • Full-surface support table made of birch plywood with integrated small parts support • Auxiliary fence profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller locking during the sawing process Saw beam: • Stable, durable saw beam steel construction • Automatic saw beam locking with cutting interface detection Saw unit: • Backlash-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting accuracy • Powerful, high-torque 5.5 kW motor (7.5 HP) • More comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic lowering and pivoting of the saw motor • Pneumatic clutch for easy switching to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control: • 12" touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Infinitely variable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension setting: • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Mounting: • Wall or free-standing mounting possible Saw blade: 300 mm, scoring saw, 60 teeth Cutting range: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm, consisting of: 1.00 Cutting interface distance vertical 1000 mm 1.00 Language documentation DE 1.00 Saw motor 1-phase, 400V, 50Hz, EVO/CON 1.00 Feed speed 10-25 m/min 1.00 Scoring saw unit VSA (scoring saw infinitely adjustable) 4.00 Free-standing support, complete 1.00 Small parts support, aluminum, complete (2-part) 1.00 STRIEBIG ExpertCut CON consisting of: - Electronic positioning system EPS-X - Automatic saw beam positioning ASP - User guidance with STRIEBIG ExpertCut software license for 1 office workstation (network license) - Label printer - Network connection - Operating manual - Paper holder 1.00 UPS 24VDC for touch PC (uninterruptible power supply) 1.00 Block parts, initial license 1.00 Service: data import / label layout (remote) 1.00 Basic training STRIEBIG cutting optimization (online training) Fedpfx Aozx E T Dslbegg Storage location: Rieth

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm workpiece weight 400 kg table longitudinal travel 650 mm table speeds 2 - 28 m/min table cross travel 400 mm speed 100 - 1000 mm/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 kW peripheral speed 10 - 32 m/sec total power requirement 11 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,95 x 2,65 x 2,47 m Additional information CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Fedpfezzw Rtex Albegg Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar Machine light Without grinding wheels and flanges.

Condition: good (used), Manufacturer: John Scheer Meuselwitz Machine number: 6815.17 Type / Model: SFW 250 Table: mm Sanding area: 1,000 x 250 mm Magnet: 1,000 x 250 mm Grinding wheels: mm Table speed: m/min Table spindle center max.: mm max. sanding height: mm Connection: 10.5 kW Accessories/equipment: Electromagnet Condition: good Fgodpfxorrdtxj Albsg Weight: 5 tons Dimensions: mm

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Gillardon GB 40 VE Year of manufacture 2003 Fgjdsyy R N Aepfx Albjg Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.

Condition: used, functionality: fully functional, total length: 2,400 mm, total width: 1,200 mm, Demmeler 3D welding/clamping table for sale. Main item: - Manufacturer: Demmeler - Type: 3D welding/clamping table - Approximate table size: 2400 x 1200 mm - Used condition - Condition and completeness are shown in the photos. Additional welding tables are also available and can be purchased separately or as a package: - Siegmund 3D welding table 2400 x 1200 mm – EUR 4,900 - Siegmund welding table 1500 x 1000 mm – EUR 2,200 - Siegmund welding/clamping table 1000 x 500 mm – EUR 800 Package price for all 4 welding tables: EUR 11,900 EXW Estonia. Used equipment, sold as is. Individual sale or package sale can be discussed. Fodpfx Alezv N Nwjbogg Loading: Forklift/pallet handling capability is available on site. We can load the tables onto the buyer’s truck. Transport: Transport is at the buyer’s expense.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 2,240 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, saw blade bore: 30 mm, We are offering this Striebig CONTROL 18 5224 vertical panel saw in very good condition, manufactured in 2021. Please find the valuation report attached. Type: 5224 Cutting length: 4,300 mm Vertical cutting height: 2,240 mm Horizontal cutting height: 2,100 mm Fgjdoy N Sf Rjpfx Albjg Maximum material thickness: 80 mm Rated voltage: 400 V Frequency: 50 Hz Feed speed: 10–25 m/min Standard machine equipment One-piece steel frame Bearing-mounted rollers with automatic brake Dust extraction system integrated into the frame Automatic recognition of the center support strip User-friendly controls for enhanced operating comfort Horizontal laser cut-line projection 12" touchscreen control panel Optimal support surface across the entire cutting area Automatically pivoting steel-wood support section (table) Small-format cutting support integrated into the frame Carbide-tipped saw blade, diameter 300/30 mm Sound-insulated saw housing 5.5 kW drive motor (S6 duty) Electromagnetic motor brake Automatic beam locking Precise unit positioning via push-button control Automatic locking of the cutting unit Automatic saw plunge function Automatic rotation of the cutting unit Operating hours counter DMS digital measuring system in both horizontal and vertical directions (X and Y axes) Expert Cut package Electronic dimension setting on the X axis Automatic positioning of the beam and cutting unit 12" control screen Striebig cutting optimization software Label printer Option for connection to the company network The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: used, Year of construction: 1994, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 55 - 1450 U/min Fsdpfxezu Tk Ns Albogg taper MK 4 column diameter 145 mm total power requirement 2,2 kW weight 500 kg dimensions 800 x 1000 x 2000 mm Features: - Heavy-duty pillar drill - Infinitely variable speed control (V-belt) - Automatic spindle feed * with electromagnetic engagement - Pole-changing motor - Right/left rotation of the drill spindle - Fixed drilling depth stop - Machine table with 2 T-slots * height-adjustable via hand crank - Coolant system - Machine vise - Drill chuck - Emergency stop