Used Electromagnetic for sale (346)

Condition: new, New electromagnetic friction clutch with X/Y/Z feed for tool milling machines from the TOS/INTOS Žebrák production line, models FNG/FNGJ/FNGP. Please specify the exact machine type when making inquiries. Other spare parts are also available. Itedpfxsdx Rfio Am Hsl

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 24 V, Electromagnetically actuated single-ring multi-plate clutches. Nominal torque moment upon clutch size. See attached document. Description of ELS clutches and their advantages: Iedpfod H T Nujx Am Hstl The ideal solution for automatically controlled machines and production lines. Relatively high level of transmitted moment concerning the size of the clutch. The compact design enables smaller size and lower weight of the driving unit. Fast grow increase of the torque moment to the nominal value A low residual moment after switch off. Low wear of the friction plates. Easy to adjust using the adjusting nut. Easy to assemble. Typical applications: - Production lines - Machine tools - Textile machines - Wrapping machines - Food industry machines - Building machines - Operational conditions For a lubricated or dry environment.

Condition: good (used), Type / Model: FE 200/800 Size: 800 x 200 mm Height: 80 mm Itodpsmqirpofx Am Hel Connection: Accessories/equipment: cable must be reconnected Condition: good weight: approx. 100 kg Dimensions: 800 x 200 x 80 mm

Year of construction: 1988, condition: good (used), Machine number: 91043 Type / Model: FE 200/600 Size: 600 x 200 mm Height: 90 mm Connection: 24 V 110 W Accessories/equipment: Condition: good Isdpfx Amomqirae Hetl Weight: 80 kg Dimensions: 600 x 200 x 90 mm

Condition: good (used), Size: 700 x 175 mm Height: 80 mm Connection: Accessories/Equipment: Isdpfsmqirhjx Am Hetl Condition: good Weight: approx. 70 kg Dimensions: 700 x 175 x 80 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 5645, input voltage: 380 V, type of input current: three-phase, total width: 1,600 mm, total length: 2,000 mm, total height: 1,700 mm, overall weight: 2,150 kg, power: 8.2 kW (11.15 HP), input frequency: 50 Hz, input current: 15 A, table length: 600 mm, table width: 200 mm, number of digital displays: 1, Hydraulic surface grinder with electromagnet and digital readout. Itjdpfszt Ibyex Am Hjl

Year of construction: 2026, condition: new, functionality: fully functional, EMBS-C-1000 ELECTROMAGNETIC SEPARATOR Iodpfxszmntps Am Hjtl Magnetism: 952x912x560mm Magnetic Block 5.2kW Magnetic Output 3-Pole Magnet 920 Gauss Magnetic Intensity at 350mm Distance Additional Shooting Magnet Belt: EP600-4-10mm Rubber Belt Reducer Motor: 2.2 kW Yilmaz Brand Electric Control Panel: 380V 50Hz Supply Control Unit Included Rectifier Included Others: Magnetically Isolated Steel / Stainless Steel Body Automatic Cleaning

Condition: excellent (used), For sale: Industrial electric motor with DC electromagnetic brake. Complete drive unit suitable for use in industrial machinery, overhead cranes, hoists, conveyors, and other equipment where shaft stoppage is required immediately upon power disconnection. The motor has been removed from industrial machinery. Visual condition is very good – standard signs of use, technically flawless. The electromagnetic brake ensures instant shaft stop and locking, a feature commonly used in drives requiring a high level of safety. Technical details: Motor manufacturer: Cantoni Motor type: 3-phase Power: 5.5 kW Voltage: 400 V Frequency: 50 Hz Speed: approx. 950 rpm Ijdpeyridbefx Am Hetl Protection class: IP55 Insulation class: F Brake: DC (direct current) Braking torque: 150 Nm Brake supply: 180 V / 75 W Year of manufacture: 2018 Made in the EU PRICE IS PER PIECE.

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) Rated current: approx. 0.4 A Rated power: approx. 40 W The magnet is tiltable up to 90° and has a sinus support surface. Net weight: 29 kg Iedpfexcimijx Am Hotl

Condition: new, functionality: fully functional, We offer the biggest stock with electromagnetic clutches and brakes made by PSP POHONY. In continuous sale there are types: ELS, ELK, ELB, EZF, ELA, EKX and many more. Also spare parts for them: steel and friction plates, brush-holders and drivers. In inquiries please provide a specific type and size, or a photo and dimensions, then we will select the appropriate size. All sizes available: 1,25 2,5 4 Iodpfov Tzndsx Am Hjtl 6,3 10 16 25 40 63 100

Condition: good (used), Machine number: 140824 Type / Model: 50 / 150 Size: 1,500 x 500 mm Height: 110 mm Connection: 110 V Accessories / Equipment: Condition: good Weight: 470 kg Dimensions: 1,600 x 500 x 110 mm Ijdexc Nnajpfx Am Hjtl

Condition: good (used), Year of construction: 2007, Electro-magnetic clamping plate including electronic polarity reversal control unit, Isdpfslbggtjx Am Hstl control unit and keypad complete Please contact us if you are interested!

Condition: used, mileage: 50,324 km, power: 235 kW (319.51 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, ????? ONLY COMPLETE ????? ????? ONLY COMPLETE ????? Vehicle No.: 254-26 Mercedes Benz 2632 Actros MP3 6x4 MULTISYSTEM: ROLL-OFF TIPPER / CRANE / WINTER SERVICE SALT SPREADER Mounting plate SCHMIDT with hydraulic connections * Registration: 08/2013 * Original Mileage: 50,324 km * Wheelbase: 4,500 mm * Front axle: leaf spring suspension * Rear axle: air suspension * Tire condition: approx. 50-70% * EURO 5 - AdBlue * Reversing camera * Blind spot camera * Automatic transmission * German vehicle Iedpfx Amsz Dctce Hetl Roll-off Tipper: MEILLER RK 2067, Year: 2013, max. 20,000 kg, 300 bar CRANE / Roll-off Container: MGK Type HLK 95a3, Year: 2003, Max 9.18m = 960kg / at 2.20m = 4,200 kg Salt Spreader / Roll-off Frame: KÜPPER WEISSER, Type IMSSF E35050DFA, Year: 2015, KUBOTA engine Brake disc cover, front axle load 9.0 t, battery 220 Ah, additional compressed air tank, electromagnetic viscous clutch for fan, noise reduction package S for city use, urea tank (AdBlue): 95 liters, rear axle H 7, 13 t, axle ratio 300, fuel tank: 400 liters, air compressor 2-cylinder, fan high-speed belt drive, auxiliary drive MB 2C, programmable special module, pipe rupture protection braking system, rotating beacon left/right, reversing warning device acoustic (warning signal outside), rear window, fuse box, seats in the cab: driver's seat suspension seat comfort, sun visor, cab socket 24V, oil cooler transmission Additional Equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2-line, trailer coupling: towing hitch, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirror wide-angle and heated, left, outside temperature display, roof hatch (steel), differential lock rear axle, cab: suspension for bad roads (6.0 Hz), cab: M (medium), generator 80 A, interior filter: pollen filter, body / structure: chassis, model update from 06/2008, engine 12.0 L - 235 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, disc brake front axle, disc brake rear axle, steel rims 9.00x22.5, Telligent - shifting system, front underrun protection, CB radio preparation, telephone / fax preparation, front axle cambered, immobilizer, heat-protective glazing, central locking including key, permissible gross weight 26.0 t Inspection possible during our opening hours at any time, test drive by arrangement! In the case of export sales, a deposit will be retained, which will be refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information without guarantee - errors, changes, typing errors and prior sale reserved. Vehicle descriptions are explicitly not guaranteed characteristics. We refer to our general terms and conditions and ask you to take note of them.

Condition: used, mileage: 50,324 km, power: 235 kW (319.51 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, ????? ONLY COMPLETE ????? ?????ONLY COMPLETE????? Vehicle No.: 254-26 Mercedes Benz 2632 Actros MP3 6x4 MULTISYSTEM: ROLL-OFF DUMP BED / CRANE / WINTER SERVICE SALT SPREADER Isdpfx Amsz Dcr Ss Hstl Mounting plate SCHMIDT with hydraulic connections * First registration: 08/2013 * Original mileage 50,324 km * Wheelbase 4,500 mm * Front axle leaf spring suspension * Rear axle air suspension * Tire condition approx. 50-70% * EURO 5 - AdBlue * Reversing camera * Blind spot camera * Automatic transmission * German vehicle Roll-off dump bed: MEILLER RK 2067, built in 2013, max 20,000 kg, 300 bar CRANE / Roll-off container: MGK Type HLK 95a3, year of manufacture 2003, max 9.18 m = 960 kg / at 2.20 m = 4,200 kg Salt spreader / roll-off frame: KÜPPER WEISSER, Type IMSSF E35050DFA, year of manufacture 2015, KUBOTA engine Cover plate for brake discs, axle load front axle 9.0 t, battery 220 Ah, additional compressed air tank, electromagnetic viscous clutch for fan, noise reduction S-package for city use, urea tank (AdBlue): 95 liters, rear axle H 7, 13 t, bevel gear 300, fuel tank: 400 liters, air compressor 2-cylinder, fan high-speed belt drive, auxiliary drive MB 2C, programmable special module, pipe breakage protection brake system, rotating beacon left / right, reversing warning audible (warning signal outside), rear window, circuit breaker, seats in the cab: driver's seat sprung comfort seat, sun visor, cab socket 24V, oil cooler transmission Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer coupling: towing coupling, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, roof hatch (steel), differential lock rear axle, cab: suspension for bad roads (6.0 Hz), cab: M (medium length), generator 80 A, interior filter: pollen filter, body / superstructure: chassis, model revision from 06/2008, engine 12.0 L - 235 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, disc brake front axle, disc brake rear axle, steel rims 9.00x22.5, Telligent - gear shifting, underrun protection front, preparation CB radio, preparation telephone / fax, front axle angled, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 26.0 t Inspection possible during our opening hours at any time, test drive by appointment! In the case of export sales, a deposit will be retained, which will be refunded after receipt of the certificate of conformity. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee - Errors, changes, typing errors and prior sale reserved. Vehicle descriptions are explicitly not guaranteed properties. We refer to our general terms and conditions and ask that you take note of them.

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Iodpfozhx A Rsx Am Hetl Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Special offer: €42,000 (instead of €49,900), excluding VAT. Immediately available / Made in Italy Included premium features: - Heidenhain ND5023 3-axis position display - 5-position length stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air supply on the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free movement of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret plexiglass guard, rear guard covering the entire machine length, guard for leadscrew and feed rods, emergency stop button - Chip tray on wheels - Cooling system with electric pump - Central lubrication of the guides with automatic pump - Traveling and steady rest Itodpfx Aspq R Rdem Hjl - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Technical data: - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Compound slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Ijdez A H Sgjpfx Am Hstl Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: ready for operation (used), functionality: fully functional, Grinding length: 600 mm Grinding width: 250 mm Workpiece height: 450 mm Electromagnetic clamping table: 600 x 250 mm Grinding wheel diameter: 300 x 50 x 76.2 mm Spindle speed - stepless: 800 - 4200 rpm Total power requirement: 4 kW Machine weight: approx. 2.9 t Isdpfx Amsz Ayrvj Hetl

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm Itodpfew U Tlzsx Am Hol PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Iedpjdvm Eujfx Am Hstl Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swinging diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2000 rpm Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Cross feeds X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed drive - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard - 3-jaw chuck - 4-way tool holder - Foot pedal with mechanical braking device - Coolant system - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment in accordance with CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix Itedpfx Amoir Igwe Hsl Also available as a geared version.

Condition: new, TC 180 x 1000 V Center distance: 1000 mm Center height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Isdpfx Aeir Imysm Hjtl Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2500 RPM Mechanical feed steps: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Inch thread: (32) 4 - 56 TPI Module thread: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking system (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gear - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical braking system - Coolant system - Chuck guard and spindle cover in accordance with European CE safety standards - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix also available as geared variants

Condition: new, Made in Italy. Maximum turning height: 300 mm Turning diameter over bed: 600 mm Turning diameter over slide: 380 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm Motor power: 9.2 kW (optional equipment / standard: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock ram diameter: 85 mm Tailstock ram travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic lubrication of the guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick-change tool holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted Itodpfx Amed Nk Ncs Hsl - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g., Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: chuck guard with Plexiglas panel, secured by microswitches. Tool holder guard with Plexiglas panel. Rear splash guard over the entire length. Lead screw and feed screw protection by light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip container on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price including 3-axis digital readout.

Condition: new, Technical Data: Itodjd R S Ndspfx Am Hel Fixed angle table: Clamping surface of the fixed angle table: 800 x 400 mm Max. table load: 200 kg Working spindle: Tool holder, horizontal and vertical: ISO 40 Power of the main drive motor / 100% duty cycle: 2.2 kW Vertical milling head: Speed range, stepped: (12) 50 - 2000 rpm Drill quill, stroke: 100 mm Swivel range: +/- 90° Travel distances: X-axis, automatic/manual: 385/400 mm Y-axis, automatic/manual: 185/200 mm Z-axis, automatic/manual: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: continuously adjustable Rapid traverse: 1000 mm/min Features: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle runout max. 0.005 mm, incl. test report according to DIN 8615 (roller bearings SKF®/NSK®) - Vertical milling head can be swiveled for horizontal milling (without disassembly) - All critical parts of the machine, e.g. machine frame, table, milling head, housing, etc., are made of stress-relieved MEEHANITE® quality cast iron (FC 30) and are extensively ribbed to provide the machine with maximum stability and working accuracy. All guide rails are coated with TURCITE®-B - All machined surfaces in the working area, such as guide rails, table surfaces, T-slots, etc., are hardened and precision-ground. - The powerful drive transmits the power of the main motor to the gearbox via belts. - All axes have their own DC servo motors. These enable sensitive, stepless adjustment of the feed speed. Standard equipment: - DC servo motors for all axes X/Y/Z, incl. electromagnetic brake - Fixed box table - Original Ganter Norm® safety handwheels - Chip collection tray - Backlash-free HIWIN® precision ball screws in all axes X/Y/Z - Gearbox for main spindle - Safety device according to CE or better: - Spindle guard with several micro-switches, adjustable in several steps (enclosure available as an option) - Two emergency stop pushbuttons (1 x machine frame, 1 x control panel) - Mechanical Ganter Norm® safety handwheels in all axes - Electromagnetic spindle brake (for immediate spindle stop) - Electrical overload protection for all axes - Electrical equipment SIEMENS®, BALLUFF® - Braking system prevents the table from dropping - Three reducing sleeves SK 40 to MK 1, 2, 3 - Collet chuck with holder according to DIN 2080 incl. collet set (Ø 6, 8, 10, 12, 16, 20, 25 mm) - Draw-in thread spindle - Horizontal milling arbor (Ø27 mm) - Automatic central lubrication - Lamellar stainless steel cover for the Z-axis guide rail in the working area - Machine light - Coolant system integrated in the machine base - Test report according to DIN 8615 - Operating tool - Machine according to CE - Operating manual, parts list, incl. electrical wiring diagrams, etc.

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel Iodpezz Hhnefx Am Hotl – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.