Used Column Drilling Machine for sale (66,379)

Condition: good (used), Type: SSB 3 A Ppedpfexlqxfox Ahysr Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), Manufacturer: Bulgaria Year of manufacture: 1979 Machine number: 8499 Type / Model: PK 203 Drilling capacity in steel: 25 / 30 mm Spindle taper: MK 3 Ppodpfey E Hahsx Ahyjr Speeds: 95 to 2,000 rpm Feed: 0.08 to 0.32 mm/rev Throat: 280 mm Table: 410 x 440 mm Clamping surface: 320 x 345 mm Footprint: 510 x 760 mm Stroke: 160 mm Total connected load: 1.1 kW Accessories/Equipment: Condition: good Weight: 0.5 t Dimensions: 550 x 1,000 x 1,900 mm

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 Ppedpfxsikrtqe Ahyer drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate Ppsdpfxegd Ipko Ahysr - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 3, drilling depth: 120 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 200 rpm, total width: 400 mm, total length: 600 mm, total height: 1,820 mm, table width: 320 mm, table length: 400 mm, Flott SB M3 ST 3-phase 380V motor runs smoothly. Stepless speed adjustment via variomatic spindle drive. Spindle speed adjustable from 200 to 2000 RPM. MT3 spindle taper. Röhm Supra 3-16mm drill chuck included. Machine vice included. Spindle safety guard. Psdpoy D Uihofx Ahyspr Emergency-off switch. Drilling depth adjustable. Maximum drilling depth: 120mm Table size: 400x320mm Table height adjustable. Overall dimensions: 60x40x182cm Year of manufacture: 1987 Made in Germany Overall good condition. Contact us for shipping options! € 2,350.00

Condition: good (used), Year of construction: 2005, Offer 26119 Ppsdpfx Asy D Nxqjhyor Technical data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 125 mm - Infinitely variable drill spindle speeds: 80 – 3200 rpm - Thread cutting capability via reversible rotation up to M 20 - Throat: 260 mm - Max. distance table to spindle: 825 mm - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement approx.: W 500 x H 1900 x D 950 mm - Weight approx.: 230 kg - Cross table with handwheels

Condition: good (used), Year of construction: 1997, machine/vehicle number: 21950, Offer 26030 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling diameter in steel ST 60: 32 mm - Thread cutting attachment - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Infinitely variable spindle speeds - Range 1: 65 - 240 rpm - Range 2: 130 - 480 rpm - Range 3: 240 - 875 rpm - Range 4: 800 - 1750 rpm Psdpfx Ahoy D Nipeyspr - 3 feed rates: 0.1; 0.2; 0.3 mm/rev - Throat: 290 mm - Max. distance table - spindle: 520 mm - Swivel table with 2 T-slots, 450 x 450 mm - Height adjustable via rack with hand crank - Machine vice underneath the swivel table - Emergency stop button - Lighting - Drive: 400 V / 0.9 / 1.3 kW - Required space approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: used, functionality: fully functional, Column drilling machine Ppsdpfx Aey A Sz Sshyor Tool holder MK 4 With gear transmission, quill feed.

Condition: ready for operation (used), Column Drilling Machine / ALZMETALL AB 3 ES from vocational school - Well-maintained original condition - Drilling capacity / steel max. 35 mm - Throat depth 280 mm - Table size 600x470 mm - Drilling stroke 180 mm - Morse taper MK 3 - Infinitely variable speed control - Drill depth stop - Speed display - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight 480 kg Ppodpfx Aoyzakrohyor Errors and omissions excepted.

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm Ppodorz Nqaspfx Ahysr spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg Pedevxpp Hepfx Ahyopr

Condition: ready for operation (used), Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Thrust: 300 mm Table size: 305 x 380 mm Podsv Du Raopfx Ahyepr Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Space required: 800 x 400 x 1800 mm Weight: approx. 280 kg

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t The machine can be viewed in our warehouse in 09599 Freiberg. Ppodpovytw Dsfx Ahysr

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm Ppedpfsqa Txqox Ahyer spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: excellent (used), functionality: fully functional, 4-speed gearbox speeds from 180 to 2000 rpm motor power 0.75 kW Podpeyxcu Ijfx Ahyjpr drilling depth stop up/down adjustment vice available at extra cost

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Podpfx Ahswtdmusyjpr Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Machining base plate approx. 350 x 320 mm With motor: 1.5 kW, 1415 rpm, 380/220V

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Ppodpfx Ahoharwveyer Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: excellent (used), Year of construction: 1980, table width: 460 mm, table length: 745 mm, space requirement height: 2,400 mm, space requirement length: 1,200 mm, space requirement width: 800 mm, Manufacturer: Alzmetall Pedpsvwkw Aefx Ahyepr Type: AB 40 ST Spindle: MK 3 Table dimensions: 745 x 460 mm Machine can be viewed under power

Condition: good (used), Year of construction: 2007, machine/vehicle number: 075912, Offer 26062 Technical Data: Psdpfoyvhunex Ahyopr - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 45 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Throat: 385 mm - Table with 2 T-slots, height adjustable by hand crank - Table size: 550 x 480 mm - Min. / max. distance table / drill spindle: 120 / 650 mm - Column diameter: 200 mm - Electromagnetic feed: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - With overload protection - Infinitely variable spindle speeds in 3 ranges: 60 – 1900 rpm - Drive: 400 V / 3 kW - Space requirement approx. W 700 x H 2120 x D 1100 mm - Weight approx. 700 kg - Includes: thread cutting device, coolant system, digital speed display

Condition: new, Year of construction: 2026, Thread cutting device Undercutting device Programmable drilling depth stop Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Option R1: Infinitely variable spindle speeds with intermediate gearing, speed range 100-2000 rpm Option R2: Infinitely variable spindle speeds with intermediate gearing, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle taper MK 4 Drilling depth 160 mm Throat 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, stepless Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-reversible, 1.5/3.0 kW Weight 420 kg Option Drill Set No.6: Taper arbor B18/ MK 4, Keyless drill chuck B18/ 3-16 mm, Machine vice No. 2-140 and T-slot bolts, EUR 910.00 Option: Automatic spindle stop at upper drill spindle position, EUR 432.00 Option: Chip break module EUR 432.00 Delivery: free to site including packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – REQUEST AN OFFER! Ppodpsd H Rh Rjfx Ahyjr FLOTT AUTHORIZED DEALER

Condition: new, Year of construction: 2026, Continuous/Standard Drilling Capacity: 18/20 mm Thread Cutting Capacity: M12 (depending on pitch) Spindle Taper: MK II Drilling Depth: 100 mm Ppjdevu Tmnspfx Ahyor Throat Depth: 240 mm Column Diameter: 82 mm Usable Work Surface (W x L): 340 x 280 mm T-slot Size (Arm), Spacing (mm), Slot Width (mm): Number: 2, 125, 13/26 Speed Display: Digital Drill Depth Display: Digital Drill Depth Stop: Quick-adjust stop ring Manual Drill Feed Table Height Adjustment with Rack-and-Pinion Motor: Three-phase AC – frequency-controlled, 230 V, 0.75 kW Spindle Speeds: Infinitely variable 30 – 3000 rpm Table Work Surface: 155 - 415 mm Base Work Surface: 155 – 550 mm Machine Dimensions: 355 x 705 x 1,825 mm Weight: 195 kg Optional Accessories Drilling Bundle 3 consisting of: - Machine vice [felix] 2.0, 100 mm - Quick-action drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 D0Ezfi Factory warranty: 3 years Free delivery including packaging (Germany only) Delivery time: available immediately from stock NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN OFFER!

Condition: like new (used), Year of construction: 2025, Column Drilling Machine BOMA SB 32 - V - CE marking - Exhibition machine / Unused - Morse taper MT 3 - Infinitely variable speed control - Thread cutting device up to M16 - Spindle speeds / Infinitely variable 50-2100 rpm - Spindle stroke 135 mm - Worktable rotatable 360 degrees - Worktable size 415x375 mm - Column diameter 100 mm Ppedpfx Ajyrnm Ushyor - Throat depth 250 mm - Distance spindle - table 850 mm - Distance spindle - base plate 1190 mm - Drill chuck - Documentation Dimensions: LxWxH 0.6x0.9x1.85 meters / Weight 280 kg Errors and omissions excepted

Condition: new, Bernardo Gear column drilling machine GB 50 HS Drilling capacity in steel50 mmDrilling capacity in cast iron60 mmThread cutting max.M42Drill chuck1 - 13 mm / B 16Morse coneMK 4Spindle speed / number of steps40 - 2100 rpm / 12feed range0,1 / 0,2 / 0,3 / 0,4 mm/reach370 mmDistance spindle / table max.600 mmDistance spindle / base plate 1190 mmSleeve stroke 250 mmPillar diameter200 mmTable size / T-slot size 600 x 500 mm / 14 mmMotor power2,2 / 2,8 kWMachine dimensions (W x D x H) 700 x 1050 x 2350 mmWeight approx. 670 kgScope of supply - Toothed ring drill chuck 1 - 13 mm / B 16 drill chuck mandrel MK 4 / B 16 reduction sleeve MK 4 / 3, MK 4 / 2 - Motorised table stroke coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector LED machine light - Initial filling with Shell Tellus 46 - Digital speed display - Digital drilling depth display - Height-adjustable protective cover Pjdpfsd Tm T Hex Ahyjpr

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BZ 40 TECHNICAL DATA - STANDARD max. drilling capacity for steel (St 60) at continuous power S1 Ø 40 mm max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 45 mm max. tapping capacity for steel (St 60) at continuous power S1 M 33 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 39 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 180 mm motor power spindle 4,12 kW Drive V-belt Speed adjustment stepless speed range for 50 Hz - motor, n = 1.500 rpm 100 - 2.000 rpm Feed automatic or manual Number of automatic feeds 3 gears range of automatic feeds 0,1 - 0,2 - 0,3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm column diameter 150 mm distance spindle center / column 350 mm Machine weight (net) 470 Kg Gross weight 520 Kg Dimension transport v. (length x width x height) 2,3 m x 0,6 m x 1,1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency converter infinitely variable speed adjustment via potentiometer digital speed display 3 automatic feeds electromagnetic clutch ergonomic 4-fold handle cross with integrated feed buttons scale with adjustable drilling depth automatic feed reversal during thread cutting automatic tool ejector movable, rotatable and tiltable work table ( type MGI ) Ppsdpfxjgy Haaj Ahyer machine base plate with machined support surface, T-slots and integrated coolant device integrated

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA - STANDARD max. drilling capacity for steel (St 60) at continuous power S1 Ø 50 mm max. drilling capacity for grey cast iron (GG 20) at continuous power S1 Ø 60 mm Max. tapping capacity for steel (St 60) at continuous output S1 M 42 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 50 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 200 mm motor power spindle 4 kW Drive 3-speed gearbox and V-belt Speed adjustment infinitely variable via potentiometer Speed range for 50 Hz motor, n = 1.500 rpm 30 - 300; 90 - 900; 190 - 1.900 rpm Feed automatic or manual Number of automatic feeds 4 gears range of automatic feeds 0,1 - 0,2 - 0,3- 0,4 mm/rev Table dimensions (width x depth) 550 mm x 550 mm column diameter 175 mm distance spindle center / column 360 mm Machine weight net/gross 760 kg / 850 kg Dimension transport v. (length x width x height) 2,4 m x 0,7 m x 1,3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with quality gears and automatic oil pump lubrication and V-belt 3 gear speeds preselectable via 1 front lever 3 speed ranges with infinitely variable speed adjustment by means of frequency converter digital speed display integrated in front panel Psdpfogy Halex Ahyjpr 4 automatic feeds electromagnetic clutch ergonomic 4-fold handle cross with integrated feed buttons handwheel for fine manual feed scale with adjustable drilling depth