Rapid Radial Drilling Machine

BERNARDO SRB 40 NC

Condition: as good as new (ex-display), Year of construction: 2021, bore capacity in steel (diameter) 40 mm arm length 370 - 950 mm workpiece height max. -- mm turning speeds 50 - 316 / 316 - 2000 U/min spindle taper MK 4 tread diameter max. M30 boring head -90° bis +90° schwenkbar quill stroke 200 mm feed (6) 0,08 - 0,50 mm/U distance spindle /table 390 - 780 mm T-slots 18 mm column diameter 220 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,45 x 1,2 x 2,72 m Very good condition * Electromotive height adjustment of the drill head without adjustment the drilling position, ideal for deep hole drilling * Drill head can be swiveled 180°, boom can be moved back and forth and horizontally pivotable * Thread cutting device and 6 automatic drilling feeds * Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces * Digital speed and drilling depth display * Quickly adjust the drill head to the workpiece and clamp it hydraulic * with electronically stepless speed control * User-friendly operation via membrane keyboard Pjdpfx Adjxwdvbsnord Scope of delivery: Thread cutting device LED machine light Coolant device Height-adjustable protective cover Electromagnetic spindle feed Digital speed display Digital drilling depth display Electromotive drill head adjustment

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Prodpfjrn Riqsx Adnjd Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: as good as new (ex-display), Year of construction: 2024, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, mot. backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar- Prodog Dvpyepfx Adned

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, CONTROLS .. CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 1800 mm .. Y-axis travel: 2000 mm .. Z-axis travel: 1100 mm TABLE .. table surface (left-right): 1700 mm .. table surface (front-back): 1400 mm .. workpiece load (max): 5000 kg Prodpfx Adoxtiwconsd SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: HSK A100 .. drive power S6 40%: 44 kW .. drive power S1 100%: 32 kW TOOL MAGAZINE .. number of positions: 100 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 8400 mm .. space requirements -front/back-: 9000 mm .. total height: 4200 mm .. total weight approx.: 35000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Equipment: - Infrared measuring probe Heidenhain TS 641 - Coolant tank 900 l - IKZ 40 bar through spindle center (AD) - rotating lens - Electronic handwheel - 3D path control Optional: - hyd. Clamping system (Stark)

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. Predpfxsf Sqckj Adnod High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: used, Year of construction: 1996, charge load 135 liter 1220 mm tank diameter / tank height 1.220 / 1035 mm Psdpfxewcg Erj Adnsrd 304 mm motor capacity 0,75 kW motor speeds: 1500 U/min voltage 400 V weight of the machine ca. 600 kg dimensions of the machine ca. 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 - Machine ON: 44.854 h - Heat unit

Condition: new, Year of construction: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features a flat working container bottom with integrated separation, designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out through the integrated flap, which can be operated either manually or pneumatically. Upon request, reinforced suspension and a more powerful motor can be fitted to handle higher loads. The motor speed can be infinitely adjusted using a frequency converter (optional). With its side discharge system, the EVP-A 550 can be linked with other machines for integrated workflows. The system can also be equipped with a fully automated PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also attributable to the hot-cast polyurethane lining of the working container. Technical specifications: - Gross volume: 550 liters - Working channel width: 390 mm - Unbalance motor power: 4.0 kW - Speed: 1,400 rpm - Container inside diameter: 1,400 mm All prices are net plus the currently valid statutory VAT and shipping costs. The images may show the machine including optional accessories that are available at additional cost. If you are interested, please feel free to contact us. We are happy to offer professional, non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Prsdpfx Adon Ut Ugjnod This offer is intended solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will make you a non-binding offer, which will also include information about our general terms and conditions, company details, and your right of withdrawal, before any purchase or contract is concluded.

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 25000 Control Unit Brand MAZATROL Model MATRIX Main Drive Spindle speed range 12000 Spindle motor power 26 kw Tool taper ISO 40 Movement Prodpjwbw A Esfx Adnod X-Axis Movement 630 mm Y-Axis Movement 510 mm Z-Axis Movement 560 mm Table Outer length 500 mm Outer width 500 mm Table load 500 kg Media Chip conveyor Yes This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Pjdpfeu Aa I Sjx Adnerd Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: Pjdpfx Adjbnfxusnsrd - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions