Used Electromagnetic for sale (327)

Condition: new, SERRMAC TCS and TC Drilling and Milling Machine (Cross Table) New, “CE” certified 3-year warranty Automatic feed High-efficiency transmission and electronic variable speed drive via vector inverter. Coolant system for cutting tools Threading via inverter, complete with digital tachometer Threaded spindle axis for CM4 tool clamping Cross table: 800 x 255 mm Drilling capacity in R50 steel: ø 50 mm Tapping capacity in R50 steel: M 26 Spindle taper: CM4 Redpfx Asfh Si Uemyscd Spindle stroke: 145 mm Spindle shank diameter: 72 mm Automatic feed: 3 speeds: 0.05 – 0.1 – 0.2 rpm Automatic feed with electromagnetic clutch: 3 speeds: 0.05 – 0.1 – 0.2 mm/rev Prismatic column Cross table Inverter drive Spindle speed: 45 – 2150 rpm Motor power (380 V – 50 Hz): 3 kW “T” slot dimensions: 14 x 14 mm Cross table: longitudinal travel, manual axis X: 585 mm Cross table: transverse travel, manual axis Y: 240 mm Dimensions (h x w x d) with column: 1,986 x 1,340 x 1,280 mm Weight: 780 kg

Condition: new, Year of construction: 2025, OMCN 100-ton electro-hydraulic press, Model 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. The ram is made of special steel, treated, and chrome-plated. The machine is equipped with two-hand control and synchronization as per current regulations. Complete with protective panels, rear and side. CE approval, including electromagnetic compatibility. Ram stroke: 310 mm Internal width: 1,010 mm Rodpfefh R Nyex Amyecd

Condition: ready for operation (used), Binder 86 61111H03 Electromagnetic brake 24 VDC A.Nr. 2821/133,used, good condition, 100% working, scope of supply acc. photos Rcsdpfxspnplus Amyod

Condition: ready for operation (used), Hofmann AB 9000 Electromagnetic ring balancing system SN:11160318 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Rcodpfx Amsr Nrbtoyjd

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, warranty 12 months, immediately available - Temperature 200°C, can be increased to 250°C! - Charging trolley, 5 units available, modification on request - Homogeneous temperature distribution of +/- 10°C - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume 11.6 m³ - S!MPAC control system with touch panel - Program execution with feeler as cascade control - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow 140 m³/min - Electromagnetic door locking - Rated power 180 kW - Connection power 241 kW!! - Weight approx. 3500 kg - Documentation, CE declaration of conformity Redpfx Aey Tkfwsmyscd We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, oven, kilns, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, convection oven, chamber furnace, heating furnace, chamber convection oven, annealing oven, tempering oven, recirculating air chamber furnace, hardening oven, Vötsch oven, Weisstechnik, fusing oven, curing oven, post-curing of liquid crystal windows, CFRP support structure, oven for glass, glass tempering oven, glass fusing oven, glass hardening oven

Condition: good (used), functionality: fully functional, For sale is a TSC NX300 tool precision grinding machine from 1985. The grinding machine is in good condition, considering its age. Technical data: Manufacturer / Model: TSC / NX300 (NX series) Serial number: 2523 Drive power: 6.37 kW (approximately 8.5 hp) Electrical connection: 380 V (three-phase) / 50 Hz / 3 phases Accessories: 2-axis digital display; continuously adjustable electromagnetic chuck Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Rcedpfx Amszb H S Usyed Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 2,240 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, saw blade bore: 30 mm, We are offering this Striebig CONTROL 18 5224 vertical panel saw in very good condition, manufactured in 2021. Please find the valuation report attached. Type: 5224 Cutting length: 4,300 mm Vertical cutting height: 2,240 mm Horizontal cutting height: 2,100 mm Maximum material thickness: 80 mm Rated voltage: 400 V Rsdjy N Sf Rspfx Amyscd Frequency: 50 Hz Feed speed: 10–25 m/min Standard machine equipment One-piece steel frame Bearing-mounted rollers with automatic brake Dust extraction system integrated into the frame Automatic recognition of the center support strip User-friendly controls for enhanced operating comfort Horizontal laser cut-line projection 12" touchscreen control panel Optimal support surface across the entire cutting area Automatically pivoting steel-wood support section (table) Small-format cutting support integrated into the frame Carbide-tipped saw blade, diameter 300/30 mm Sound-insulated saw housing 5.5 kW drive motor (S6 duty) Electromagnetic motor brake Automatic beam locking Precise unit positioning via push-button control Automatic locking of the cutting unit Automatic saw plunge function Automatic rotation of the cutting unit Operating hours counter DMS digital measuring system in both horizontal and vertical directions (X and Y axes) Expert Cut package Electronic dimension setting on the X axis Automatic positioning of the beam and cutting unit 12" control screen Striebig cutting optimization software Label printer Option for connection to the company network The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: used, machine/vehicle number: 10E5T60-1001, KEB Automation EMC Filter, part no. 10E5T60-1001, is an advanced passive component from the COMBILINE series, designed to eliminate high-frequency electromagnetic interference in drive systems. The device is specifically dedicated for use with KEB COMBIVERT F5 series inverters (housing sizes F4 and F5). Technical Specification: - Rated Voltage (UL): 480V AC - Max. Input Voltage: 3-phase, up to 528V AC - Rated Current (UL): 6.7 A - Rated Current (nominal): 8.0 A Rcsdey Dqbmspfx Amyjd - Mains Frequency: 50/60 Hz - Number of Phases: 3 phases + PE - Operating Temperature Range: up to 45°C (Class 3K3) - Protection Degree: IP20 Key Functions and Application: - Interference Suppression: The filter effectively blocks conducted radio frequency interference (RFI/EMI) in the range of 150 kHz to 30 MHz. - Mains and Device Protection: Prevents harmonics generated by high-speed IGBT switching in inverters from entering the power grid, protecting sensitive electronic equipment. - Standard Compliance: Helps meet EMC requirements according to EN 61800-3 for categories C1 and C2. - Mounting: Designed for control cabinet installation, often on a 35 mm DIN rail.

Condition: used, Year of construction: 2015, functionality: fully functional, We are offering for sale an X-BELT SORTING SYSTEM (FLEXSORT SC3) from the manufacturer DEMATIC. GENERAL DESCRIPTION: - The system offered is a Dematic X-Belt FlexSort SC3 sorter, ideal for logistics centers, sorting hubs, e-commerce, retail, and high-throughput operations. - Pre-owned (2015) X-Belt sorter providing precise, fast, and silent sorting thanks to its motorized trays with electromagnetic drive. The equipment has been dismantled from an active site and is available immediately. MAIN FEATURES: Circular sorter: - Up to 12,000 items/hour - Positive sorting on both sides - Maximum sorter speed: 2 m/s - Sorter designed for rapid maintenance (removal in under 5 minutes) - Powered by linear motors - Total footprint: ~2,700 m² Cross-belt trays: - Cross-belt tray size: 800 mm x 450 mm - Minimum item size: 150 × 150 × 5 mm – 0.25 kg - Maximum item size: 600 × 400 × 400 mm – 35 kg - Item discharge left and right CHUTES: - 155 chutes + 1 reject lane - Chute equipment: (Saturation indicator light stacks [1/10 chutes], PTL displays, motorized chutes with automatic diverter + idle rollers, multiple fill level sensors, and a saturation sensor) INDUCTIONS: - 4 hybrid induction stations, total capacity 2,400 items/hour each - Automatic item feeding on belts - 36 PTL sort destinations per induction DWS: - Dimensioning - Automatic barcode reading - Dynamic weighing SUPPORTED ITEM TYPES: - Plastic trays - Cartons - Soft parcels (pouches, envelopes, polybags) KEY BENEFITS: - Low energy consumption - Simplified maintenance - WMS / WCS compatibility Rcodpox Sw Rqofx Amyed - Dual-sided sorting (left/right) - >99% sorting accuracy - Quiet operation (

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,600 mm, feed length X-axis: 560 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 200 kg, grinding height: 400 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 1 m/min, grinding wheel diameter: 200 mm, distance table to spindle center: 450 mm, table speed: 25,000 mm/min, table length: 520 mm, table load: 200 kg, type of input current: three-phase, table width: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 2,850 rpm, spindle speed (min.): 2,850 rpm, overall weight: 950 kg, distance stand to spindle center: 300 mm, table height: 700 mm, grinding spindle motor power: 1,500 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 1 m/min, travel distance X-axis: 560 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 2,850 rpm, grinding spindle speed: 2,850 rpm, distance table to quill: 450 mm, warranty duration: 12 months, grinding wheel speed: 2,850 rpm, input voltage: 400 V, disc diameter: 200 mm, control cabinet length: 600 mm, control cabinet width: 400 mm, control cabinet height: 1,200 mm, space requirement height: 2,500 mm, space requirement length: 3,000 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, SURFACE GRINDING MACHINE SGA-2550AHD WITH PLC CONTROL The professional SGA-2550AHD Surface Grinding Machine has been designed for precision machining of flat surfaces in tool rooms, manufacturing facilities, and metalworking workshops. Equipped with a PLC control system, electromagnetic chuck, and high-quality components, the machine delivers excellent grinding accuracy, high repeatability, and outstanding operator comfort. The robust machine structure ensures stability during operation, minimizes vibration, and allows for superior surface finish quality. The grinder is ideal for machining tool steel, structural steel, cast iron, and other materials requiring precision grinding. MAIN ADVANTAGES • PLC Control System • Electromagnetic Chuck • High Grinding Accuracy • Rigid Machine Construction • Professional Coolant System • Easy Operation and Programming • Excellent Process Repeatability • CE Certified PRECISION MACHINING The SGA-2550AHD is equipped with a 250 × 520 mm working table and a 250 × 500 mm electromagnetic chuck. This configuration provides secure workpiece clamping and excellent machining accuracy. PLC CONTROL SYSTEM The modern PLC control system improves grinding efficiency, increases productivity, and allows easy adjustment of machining parameters. It is suitable for both single-piece and serial production. STANDARD EQUIPMENT • Coolant Tank • Electromagnetic Chuck • Balancing Arbor • Wheel Flange • Wheel Extractor • Leveling Wedges and Bolts • Tool Box and Service Tools • Standard Grinding Wheel • Working Lamp • Wheel Dresser Stand OPTIONAL EQUIPMENT INCLUDED • Full Working Area Protection • Magnetic Separator • Dust Collection System • 2-Axis Digital Readout (DRO) • Built-in Electromagnetic Chuck Controller • Wheel Balance Stand • Diamond Dresser SAFETY The machine is equipped with all necessary safety systems in accordance with European standards. The robust construction, protective guards, and CE marking ensure safe and reliable operation. TECHNICAL DATA Model: SGA-2550AHD Working Table Size: 250 × 520 mm Electromagnetic Chuck Size: 250 × 500 mm Control System: PLC APPLICATIONS • Tool Rooms Redezd U Eyjpfx Amyjcd • Manufacturing Plants • Mechanical Workshops • Tool Steel Grinding • Structural Steel Machining • Cast Iron Machining • Precision Machine Component Production DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, commissioning assistance, process consulting, and access to spare parts and after-sales service. CONTACT US If you require additional information or a customized quotation, our specialists will be pleased to assist you. We also invite you to explore our full range of metalworking machinery available on our website.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery -Temperature 200°C, increase to 250°C possible upon request -Charging car, 5 units available, conversion possible upon request -Homogeneous temperature distribution of +/- 10 °C -Internal dimensions WxDxH 3750 x 1400 x 2300 mm -External dimensions WxDxH 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with feeler as cascade control -Temperature limiter -Signal column -Directly accessible, with grid rails -Exhaust air volume flow 140 m³/min -Electromagnetic door locking -Rated power 180 KW -Connection 241 KW !!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport and installation, as well as training for your employees. Inspection in our machine hall is possible at any time by arrangement. Furnace, Oven, Ovens, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Fusing furnace, Postcuring, Post-curing of liquid crystal windows, CFRP supporting structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven Rcjdpfx Amoy Avqweyod

Condition: new, I offer a new, unused industrial drive from the renowned German company STOBER. The motor is equipped with a 24 V DC electromagnetic brake and an SSI Multiturn ROQ 425 absolute encoder, making it ideally suited for precise positioning systems, industrial automation, conveyors, and production machines. Technical specifications: Rsdpfx Ameza Hzaeyecd * Manufacturer: STOBER * Type: B21R 71 G 4 * Power: 0.37 kW * Voltage: 220–240 / 380–420 V (50 Hz) * Voltage: 220–277 / 380–480 V (60 Hz) * Rotational speed: 1370 / 1700 rpm * Electromagnetic brake: 4 Nm, 24 V DC * Encoder: Multiturn ROQ 425 SSI, 10–30 V * Protection class: IP56 * Insulation class: F * Mounting design: IMB5 * Operating mode: S3 ED 25% Condition: * Factory new. * Never used. * Very good visual condition. * Stored in a warehouse. * Sold exactly as shown in the pictures. The STOBER drive is a high-quality industrial solution that provides reliability, precise positioning, and long service life. Thanks to the use of an SSI encoder and an electromagnetic brake, it is ideal for advanced automation applications.

Condition: new, functionality: fully functional, Year of construction: 2026, The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) • Pump capacity: 3.6 l/min • Maximum pressure: 0.6 MPa ‘CITY ANT AQUA’ STREET VACUUM CLEANER Equipment for cleaning urban areas, streets, pavements, parks, stadiums, railway stations, airports, car parks and industrial zones of various types of waste. The City Ant street vacuum cleaner runs on rechargeable batteries, providing 9 hours of autonomous operation. It can be charged overnight from a 220 V mains supply. Easy to use, the vacuum cleaner can be operated with one hand and is quiet. Replacing the dust bag takes just 2–3 minutes. It does not pollute the air. It can collect all types of waste: wood, steel, plastic, paper, pieces of cardboard, textile waste, leaves, cigarette butts, cans and bottles (glass, plastic and metal), etc. The City Ant is suitable for various surfaces: concrete, asphalt, paving stones, grass, sand, etc. Technical specifications: - Electric motor - 48 V / 1200 W - 48 V / 1200 W electric drive - provides forward and reverse movement - Waste collection type - hopper; - Vacuum cleaner power 1.2 kW; - Maximum speed 6 km/h; - Hopper capacity 240 l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2.5 m; Lrs Drt Hajvriluezoi - Operating time 8 hours; - Charging time 10–12 hours; - Wheels Ø 320 mm; - Dual spray nozzles; - Dust filter area 16 m²; Rsdpfx Ast If A Dsmyjcd - Climbing ability up to 25% - Capable of clearing kerbs up to 15 cm high. - Spray nozzles: 2 – one external and one internal. - Indicator light

Condition: new, Year of construction: 2026, functionality: fully functional, STREET VACUUM CLEANER “ CITY ANT AQUA “ Equipment for cleaning urban areas, streets, sidewalks, parks, stadiums, railway stations, airports, parking lots, industrial areas from different waste. Street vacuum cleaner City Ant works on electrical accumulators which provide 9-hour autonomous work. It can be charged in the nighttime from the 220V. Easy-to-push vacuum cleaner can be used by one hand, noiseless. Changing the trash bag takes only 2-3 minutes. No air pollution. It can take all the waste: wood, steel, plastic, paper, carton pieces, textile waste, leaves, cigarette butt, cans and bottles (glass, plastic and metal) etc. City Ant fits different areas: concrete, asphalt, pavement, lawn, sand, etc. Technical specifications: - Electric motor - 48V / 1200W - 48V / 1200W electric drive - enabling forward and reverse travel - Waste collector type - hopper; - Vacuum power 1.2 Kw; - Maximum speed 6 km/h; - Hopper capacity 240l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2,5 m; - Autonomous work time 8 h; - Charging time 10-12 h; - Wheels Ø 320mm; - Doble nebulizers; - Dust filter with an area of 16 m²; - Hill climb up to 25% - Possibility of overcoming curbs by 15 cm. - Sprayer: 2 - external and internal. - Warning lamp Price- 11500, 00 Euro + aqua function 1000 Euro netto Rodpfevriluox Amyjcd The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) • Pump capacity: 3.6 l/min • Maximum pressure: 0.6 MPa

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 360 mm, spindle bore: 105 mm, turning diameter: 500 mm, center width: 1,500 mm, rotational speed (max.): 1,600 rpm, New conventional lathe DLZ 560x2000 with extensive accessories. Main Technical Data: Max. turning diameter over bed: mm Ø500 Max. turning diameter over cross slide: mm Ø310 Max. turning diameter in gap: mm Ø720 Bed width: mm 405 Max. workpiece length (between centers): mm 1500 Max. turning length: mm 1350 Effective gap length: mm 230 Spindle Spindle nose: D8 Spindle bore: mm Ø80 Spindle taper: M.T. No.7 Metric Ø113 1:20 Spindle speed (steps): 12 speeds Spindle speed range: rpm 36–1600 Further technical details available in the attached document. Main Features: Rcodsyak Evspfx Amyjd - All-inclusive price with 2-axis position indicator (SINO – General importer in Germany), installed, and powerful 7.5 kW drive - Heavily ribbed machine bed for excellent vibration absorption, even during roughing operations - Extra-wide, induction-hardened and ground guideways for long service life and high precision. Max. workpiece weight up to 500 kg - Electrically interlocked chuck guard - Equipped with adjustable micrometer stop and overload clutch - Hardened and ground gears with oil circulation lubrication for powerful and quiet spindle drive - Precision spindle bearings for high concentricity and accuracy - Clearly arranged, ergonomically designed controls - Single-lever operation for cross feed, longitudinal feed, and rapid traverse for X/Z axes on the carriage - Precise gearshift for speed and feed selection - Finely graduated feed rates and thread pitches - Main spindle gearbox with electromagnetic clutch - Major electrical components by renowned European manufacturers, e.g. Telemechanique - Comprehensive standard equipment including Multifix tool post, chuck, faceplate, 3-axis digital readout, steady rests and much more - All machines are tested by our service engineers prior to delivery Additional models (also with cycle control) available on request. Contact us today and discover the world of innovative turning technology! Our services for you: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Financing and support with subsidy applications via KFW, BAFA, and more

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 420 kg, total length: 31,000 mm, total width: 16,800 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This Profiline TP pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our Profiline TP is a semi-automatic stretch wrapper with up to 32 storable programs that guarantee absolutely consistent results. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. As part of the programs, you can also set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg. Our Profiline TP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. If the wrapper wrapper is to be used at a different location in between, it can be easily moved by means of can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you are looking for a professional & robust pallet wrapper for larger quantities that takes up as little space as possible. Rsdpfxezaanme Amyocd Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Rsdpfx Aezaangjmyecd Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! Rcsdezaanaopfx Amysd With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 420 kg, total length: 28,650 mm, total width: 15,000 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also offer you a suitable drive-on ramp, a photo cell for black object detection, or the appropriate machine film! About this model: Rcjdpjzaam Aofx Amyjd Our Profiline is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby reliably eliminating the “human factor”. The electromagnetic brake allows you to precisely set and store the film tension at each stage (bottom wrap, upward wrap, top wrap, downward wrap) within the programs. Within each program, you can additionally specify the speed of the film carriage and turntable. You can also store head wraps, bottom wraps, and the film overlap at the end of the pallet for each program. This allows you to create individual programs for every packing pattern in order to achieve optimum wrapping results every time. The programs can be password-protected, so the operator can only select from the preset programs. With a weight of 420 kg, this model is designed for loads up to 1200 kg (optionally up to 2000 kg). Our Profiline is equipped with a 1500 mm turntable and can wrap pallets up to 2500 mm in height as standard. Automatic pallet detection (via photo cell) is standard, as are adjustable head and bottom wraps. If the wrapper needs to be relocated, it can be easily lifted and moved using integrated forklift slots. This model is our recommendation if you require a professional and robust pallet wrapper for higher volumes, which can be optimally adapted to your needs. Do you need a larger turntable, a taller mast, film pre-stretching, or an automatic film cutting system? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with exactly the options you require. About us: We believe that business is conducted between people! A supplier delivers the goods you ordered—a partner does more: they help you find the best solution, support you in achieving your goals, and assist you in overcoming problems and challenges. This is our conviction. For over 40 years and in the 4th generation, we have been the partner for SMEs in all matters relating to “stretching and adhesive solutions.” On request, we are happy to advise you as to which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 260 kg, total length: 25,080 mm, total width: 15,000 mm, total height: 24,250 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our pallet wrapper "Basic" is a semi-automatic stretch wrapper from Eurapa production, which guarantees absolutely consistent results due to up to 10 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be adjusted to your requirements and saved in the programs. The programs also allow you to set how fast the film carriage and turntable run. Head and foot windings can also be saved for each program. In this way, you can store individual programs for each wrapping pattern to achieve perfect wrapping results every time. With a weight of 260 kg, this model is suitable for loads of up to 1200 kg. Rcsdezaamcspfx Amysd Our Basic pallet wrapper has a 1500 mm turntable and can wrap pallets up to 2000 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course, as are adjustable head and foot wraps. If the wrapper needs to be used at a different location in the meantime, it can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you want a good and affordable pallet wrapper that can be adapted to your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the ordered goods - a partner can do more: he helps you to find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement! Rodpfezaakhex Amyscd

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Rsdpfxjzaahmo Amyscd Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Rcjdpfxjy U U Tnj Amysd Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: good (used), Internal item no.: 23045 Electromagnetic chuck Rcedpfx Ajlvrmtomyod Manufacturer: Assfalg 600x300x80 mm 110V There is a milled recess on the plate approx. 55 mm wide and 4 mm deep.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Rcsdpfx Amoy D I I Roysd Weight: 441 kg The machine is also available for rent.