Used Metal Belt for sale (43,755)

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm Iodpfxshk Df De Adnoa

Year of construction: 1996, condition: used, conveyor belt with metal detector. length: 2400 mm strip width: 600mm travel speed: 15m/min SAFELINE metal detector product dimensions max: 600mm wide, 240mm high Iedpfxslwx Ano Adnja stainless steel frame food industry / chemical industry travel speed: 15m/min

Condition: used, Repair-needing Wide Belt Sander, Surface Grinding Machine, Sheet Metal Deburring Machine, Deburring Machine with 4 Processing Stations Sanding Unit and Brushing Deburring Unit Manufacturer: BÜTFERING - STEELMASTER Type: Frima-V/413RRTT Machine No.: 76 931 Year of Manufacture: 2002 2x Brushing Deburring Units + 2x Sanding Units Max. working width: 1350 mm Conveyor belt width: 1370 mm (heavily worn on the sides) Working thickness: 0.3 mm to 150 mm Sanding Units Abrasive belt dimensions: 1350 mm x length ?? mm Abrasive belt motor (1): 11 kW (speed 2930 rpm) Abrasive belt motor (2): 12.5 - 16 kW (speed 1470 - 2950 rpm) - Abrasive belt speed (belt 1): only at high speed - Abrasive belt speed (belt 2): 2 speed settings - Pneumatic belt tensioning Brushing Deburring Units with multiple vertical sanding discs and oscillation 2 roller brushes Ø 250 mm Roller width: 900 mm Brush speed: approx. 1440 rpm Deburr brush motor (3): 7.6 - 9.5 kW Deburr brush motor (4): 7.6 - 9.5 kW - Sanding disc speed (3): 2 speed settings - Sanding disc speed (4): 2 speed settings - Oscillating movement of brush rollers via gear motors - 2 separate drive motors, one for each brushing station Conveyor Feed Unit Conveyor motor power: 0.75 kW Isdpfx Adew Ed Uvenea - Infinitely variable conveyor speed via frequency converter - Motor-driven height adjustment for material thickness 0.3 - 150 mm Power supply: 400 Volt, 50 Hz, 55 kW Machine footprint: Length 300 x Width 270 x Height 210 cm Required space for transport: Length 600 x Width 242 x Height 210 cm Weight: approx. 5.5 tons The machine was operated with wet grinding; belt filtration system integrated in the machine frame The machine is in poor condition, was taken out of production, and stored under tarpaulin for approx. 5 months. Technically, everything still appears to be in reasonable shape, but improper storage has led to some rust formation. The machine requires refurbishment.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 4,000 mm, Length 200 cm Width 40 cm Conveyor belt with metal detector, also for non-ferrous metals and aluminum Iodeww Id Eepfx Adnoa Sensitivity adjustment of metal detection

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg Iedpfx Adot Stfhsnsa - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Year of construction: 2020, condition: used, Safe line metal detection belt Iedpfjxc Iybox Adnja Metal detector opening 450mm x 100mm See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2017, FINTEC BELT GRINDER MODEL 131 Description Details Location Request Info FINTEC BELT GRINDER MODEL 131 Iodjwyd A Nspfx Adnea MACHINE IN AS-NEW CONDITION YEAR 2017, CE CERTIFIED, VERY LITTLE USED. Complete with extraction system. Dual speed. Grinder for welded corners; fast and efficient cleaning of welds in angles on rectangular pieces such as worktops and boxes, with welded corners up to 145 mm in height. It can also produce radii on flat parts of the same height or on stacks of pieces. The patented radius-forming system is adjustable, allowing for edge radii from R=1 to R=10, or for sharp edge finishing. The large worktable, adjustable in both height and inclination, can accommodate abrasive belts of widths suitable for the height of the piece; the worktable stops ensure accurate radius forming. The self-filtering extraction unit is equipped with a cyclone for mechanical dust suppression. Abrasive belt size: 2000 x 150 mm Roller size: 50 x 150 mm Belt cutting speed: 24/12 m/sec Worktable size: 600 x 250 mm Maximum overall dimensions: 910 x 1330 x 1560 mm Approximate weight: 120 kg

Condition: new, Metallkraft BMBS 360 x 500 HA-DG Semi-automatic swing frame metal band saw for miter cuts from +60° to -60° with frequency converter. Description: -Semi-automatic swing frame metal band saw for miter cuts from +60° to -60° with frequency converter. -Designed for industrial use -For sawing e.g. stainless steel, tool steel, hollow sections and solid materials -Saw band drive with low-maintenance, oil-lubricated worm gear -With robust three-phase motor with overload protection -Saw band guide with adjustable carbide plates -With mechanical saw band tensioning and monitoring by microswitch -Cooling system on the saw band guides -With frequency converter as standard for infinitely variable adjustment of the saw band speed from 20 - 100 m/min. -With BRP saw band monitoring as standard Technical data: Motor power 2.0 kW Speed steps stepless saw band speeds 20 ? 100 m/min saw band dimensions 4780 x 34 x 1,1 mm Footprint (LxWxH) 2900 x 950 x 2270 mm Table height material feed 820 mm cutting angle 650 kg Cutting range 360 mm Cutting range 0° round tube material 250 mm Cutting range 0° round tube solid material 500 x 360 mm Cutting range 0° - rectangle lying 500 x 360 mm Cutting range 0° - rectangle standing 350 mm Iedpfx Adocgz E Tonoa Cutting range +45° - round tube material 180 mm Cutting range +45° round tube solid material 400 x 180 mm Cutting range +45° - rectangle lying 350 x 360 mm Cutting range +45° - rectangle standing 310 mm Cutting range -60° - round tube material 130 mm Cutting range -60° round tube solid material 310 x 170 mm Cutting range -60° - rectangle lying 200 x 360 mm Cutting range -60° - rectangle standing 360 mm Cutting range -45° - round tube material 180 mm Cutting range -45° round tube solid material 400 x 190 mm Cutting range -45° - rectangle lying 330 x 360 mm Cutting range -45° - rectangle standing 270 mm Cutting range +60° - round tube material 130 mm Cutting range +60° round tube solid material 270 x 320 mm Cutting range +60° - rectangle lying 240 x 360 mm Cutting range bundle - round tube solid material 500 x 220 mm

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Ijdpfx Adophvl Tsnsa Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm Isdpfx Ashh A Iyjdnsa T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Condition: good (used), Year of construction: 1998, Offer 24339 Technical data: Iedpjt Uzxnsfx Adnoa - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Condition: new, MEP band saw machine SHARK 331-1 NC 5.0 Spider All MEP models on request ! Motor power 2,2 kW band opening 340 mm belt dimensions 3650x27x0,9 mm weight 1.240 Kg Iodechhdiepfx Adnoa speed 15 - 100 m/min. infinitely variable cutting area 0° 280 / 260x260 / 330x260 cutting area 45° right 260 / 250x250 / 270x200 Cutting surface 45° left Cutting area 60° right 180 / 170x170 / 170x170 Cutting surface 60° left Description Hydraulic bandsaw fully automatic Miter cuts up to 60° left possible saw band length: 3650x27x0,9 Single stroke: 600 mm (programmable up to 10m) Simple touch screen operation. Saw arm made of Spheroguss - robust and stable Required floor space 3,4 m² Footprint 1900mm wide x 1800 mm deep For further technical data please refer to the attached PDF document.

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition Iedpfxewvv Rwo Adnja

Condition: good (used), Year of construction: 1996, Offer 24337 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm Iedpfjvbfh Rox Adnja - Weight approx. 225 kg - various contact rollers

Condition: new, BMBS 300 x 320 CNC-G Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. Description -Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. -Hydraulically controlled system for both vices and the working steps of the saw arm -Ball bearing mounted turntable -Frequency converter as standard for stepless adjustment of -saw band speed from 20 - 100 m/min -BRP - Saw band monitoring -The jaws of the two vices are equipped with long-stroke hydraulic cylinders as standard, thus eliminating the need for presetting to the material cross-section to be sawn -Quality Made in Europe Technical data Electrical connection 3 x 400 V / 50 Hz Motor power 2,4 kW Speed levels 2 saw band speed 20 - 100 m/min Saw band dimensions 3660 x 27 x 0,9 mm dimensions (L x W/D x H) approx. 2240 x 2710 x 2050 mm Table height material feed 800 mm weight approx. 800 kg Residual workpiece length min. CNC operation 115+20 mm cutting range 0° round profile 300 mm cutting range 0° round full 180 mm Cutting range 0° square material lying 320 x 300 mm Cutting range -45° round profile 300 mm Cutting range -45° round full 110 mm Cutting range -45° square material lying 290 x 300 mm Cutting range -60° round profile 200 mm Isdocgz Suspfx Adnoa Cutting range -60° round full 80 mm Cutting range -60° square material lying 190 x 190 mm Cutting range bundle round profile 320 x 160 mm

Condition: used, Year of construction: 2002, machine/vehicle number: 2204, Universal radius metal belt grinder lot no. 24541 Technical data: - Sanding belt dimensions 2000 x 75 mm - Surface sanding opening 400 x 75 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Working height 960 mm Iedpfoviudqsx Adnoa - various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm Iedschhfujpfx Adnsa band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 2015-04-070408, Offer 25155 Technical Data: - Abrasive belt dimensions: 2000 x 150 mm - Surface grinding opening: 430 x 150 mm - Abrasive belt speed: 36 m/min Iedpfx Ajw Ugvtsdnja - Contact wheel: B 150 / D 200 mm - Drive wheel: B 150 / D 200 mm - Drive: 400 V / 3450 rpm / 4 kW - Adjustable working height: 475 – 1240 mm - Motorised dust extraction, type GIBE - Space requirement approx.: W 580 x H 1250 x D 1000 mm - Weight approx.: 110 kg

Year of construction: 2004, condition: good (used), machine/vehicle number: 0441057, Offer 23300 Technical data: - Sanding belt dimension 75 x 2000 mm - surface grinding opening 75 x 300 mm - support vice - angle adjustable 90° - 30 ° - grinding belt speed 15 + 30 m/sec. - possible contact rolls Ø 20 - 76 mm Iedpfxopug D Es Adnea - contact roller length 75 mm - drive 400 V / 2,2 / 3 kW - drive speeds 1440 / 2880 rpm - 1 piece contact roll 48 mm - space requirement approx. W 800 x H approx. 1000 x D 1300 mm - weight approx. 250 kg

Condition: used, Year of construction: 1995, Order No. 23066 Technical Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface sanding aperture approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact disc W 150 / D 200 mm - Drive disc W 150 / D 200 mm Iodpfowf Hppox Adnea - Drive 400 V / 3 kW - Adjustable working height - Motorized dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Weight approx. 120 kg

Condition: good (used), Year of construction: 1995, Offer 73066 Iedpfx Adjw R Tcxjnsa Technical data: - Abrasive belt dimensions approx.: 2000 x 150 mm - Surface grinding opening approx.: 560 x 150 mm - Abrasive belt speed approx.: 30 m/sec - Contact wheel: W 150 / D 200 mm - Drive wheel: W 150 / D 200 mm - Drive: 400 V / 3 kW - Adjustable working height - Separate motorized dust extraction - Required space approx.: W 750 x H 1050 x D 1500 mm - Space requirement for extraction unit approx.: W 750 x H 1250 x D 750 mm - Weight approx.: 180 kg

Condition: good (used), Year of construction: 1999, Offer 22648 Technical data: Iedpop H Tvxsfx Adnja - Sanding belt dimension approx. 2000 x 50 mm - grinding belt speed approx. 30 m/min - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg

Condition: new, Year of construction: 2025, KRBS 101 Combined pipe, profile and belt grinder Convenient operation due to easily adjustable clamping device The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Powerful motor Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench Ijdpfxocnz Ayj Adnoa 1 x sanding roller 42 mm Model KRBS 101 Article no. 3921001 Technical data Mains connection 400 V Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc

Condition: reconditioned (used), Year of construction: 2012, Conveyor belts 1000 mm wide. Lattice frame with aisles. Actual length 90 m (can be lengthened or shortened). Counterweight tensioner. Motor, depending on length. Ijdpfxoiypzwo Adnoa Used extra strong belt in good condition.

Condition: new, Year of construction: 2020, functionality: fully functional, conveyor belt length: 17,000 mm, conveyor belt width: 1,500 mm, total length: 18,000 mm, total width: 2,300 mm, total height: 6,000 mm, discharge height: 4,500 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, Cometel C-1500-CH (P = 10”) Short summary The Cometel C-1500-CH (P = 10") is a heavy-duty chain conveyor engineered for high-volume removal of stamping scrap and industrial recycling materials. Designed for continuous service in demanding environments, the C-1500-CH features a robust chain-and-flight conveyor design with modular components and simple maintenance, making it suitable for metal stamping facilities, recycling centers, or any application requiring fast and reliable evacuation of substantial quantities of chips, slugs, and scrap. Key features - Heavy-duty chain & flight system: 10” pitch chain (P = 10") fitted with welded steel flights, sized to transport irregular, sharp, and high-density scrap materials without jamming. Iedpfx Adexywfhenoa - Rugged construction: Structural steel chassis with wear-resistant liners in the trough and impact zones; available upgrades include stainless steel or Hardox wear plates for handling abrasive or corrosive materials. - Modular and configurable: Standardized modules for various lengths, widths, and flight heights allow adaptation to different machine lines, presses, or scrap bunkers. - High throughput capability: Engineered for continuous, high-capacity operation—ideal for bulk scrap flows found in metal stamping and recycling applications (capacity varies with material density, width, and flight dimensions). - Powerful drive & gearbox: Industrial gearmotor with torque reserve for peak loads; available soft-start function reduces mechanical stress during start-up. - Simple installation & integration: Flanged connections and precision alignment features enable rapid installation to presses, hoppers, balers, or downstream systems. - Maintenance-friendly: Quick-access inspection covers, greaseable chain pins, and replaceable wear strips minimize downtime and service requirements. - Safety & compliance: Fitted with safety guards, emergency stop cables, and optional safety interlocks to meet industrial safety standards; custom guarding available for robot or press interfaces. Typical materials handled - Stamping scrap (slugs, burrs, strips) - Sheet metal offcuts and coil edge trim - Heavier machining chips and fragmented scrap (with optional coolant drainage) - Mixed metal recycling streams (ferrous and non-ferrous)