Used Emco Bs 2 for sale (142)

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm Lhodsua E Najpfx Ab Uon spindle taper MT: 2 voltage: 380/400 V

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,261 h, functionality: fully functional, machine/vehicle number: M-077.084.07, empty load weight: 4,800 kg, Equipment: chip conveyor, MACHINE DETAILS Ledpfx Aoxpvwzeb Uohn Weight: 4,800 kg Operating Hours Spindle hours: 11,261 h Control system on hours: 125,668 h EQUIPMENT Conveyor belt (FAMUP 405-1498-1, 352 kg)

Condition: excellent (used), Year of construction: 2023, Coolant system, year of manufacture 2023 ZXM960101 Lodpfxoxqlp Aj Ab Uohn

Condition: used, control SIEMENS SINUMERIC 840C x-axis 235 mm z-axis 270 mm x2-axis 235 mm z2-axis 680 mm hollow 65 mm max. turning speeds 4.000 min/-1 number of tool places 2 x 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Lodpfsxqhqiox Ab Ujhn Technical Features & Accessories: - IEMCA TAL 65 AUTO bar loader - Various fixed and driven tool holders - C-axis Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2023, Work Area Longitudinal slide travel (X) 350 mm Cross slide travel (Y) 250 mm Usable vertical slide travel (Z) 300 mm Distance spindle nose – table surface (min.-max.) 120 – 420 mm Milling Table Cast iron table, ground Clamping surface (LxW) 520 x 300 mm Table surface height above floor 900 mm Max. table load 100 kg Number of T-slots 5 T-slot size acc. to DIN 650 12 mm T-slot spacing 45 mm Milling Spindle Speed range – direct drive 0 – 10,000 rpm (Three-phase asynchronous motor) Torque (100/60% DC) 33 / 41 Nm Power (100/60% DC) 7 / 8.5 kW Tool holder per DIN ISO 69871-A SK 30 Pull stud per DIN ISO 69872 (similar to 7388/2) M12, Type A Tool holder balanced G2.5 (per DIN ISO 1940, at 10,000 rpm) Slide Drives (Servo Motors) Feed rate in X / Y / Z 24 m/min Rapid traverse speed in X / Y / Z 24 m/min Feed force in X / Y / Z 3000 / 3000 / 4000 N Mean positional scatter per VDI 3441 in X / Y / Z 4 / 4 / 4 µm Tool Magazine Tool changer based on S-arm principle with random management Number of tool stations 20 Direct tool change time 2.5 s Max. tool diameter Ø 63 mm Max. tool diameter with adjacent slot empty Ø 80 mm Max. tool length 200 mm Max. tool weight 5 kg Clamping force 1500 N Max. total tool magazine load 60 kg Coolant System (Option) Coolant supply at milling spindle via 3 nozzles Tank capacity (standard) 140 l Delivery pressure at 50 Hz 3.5 bar Flow rate at 3.5/1 bar 15 / 65 l/min Pneumatics Supply pressure 6 bar Connection line Ø 10 mm Supply volume 50 l/min Compressed air quality per DIN ISO 8573-1 Purity class 4 Lhedow N Nvlspfx Ab Usn Lubrication System Main spindle bearings Lifetime grease lubrication Guideways automatic central oil lubrication Feed screws automatic central oil lubrication Electrical Connection Power supply 3/PE 400~ V Max. voltage fluctuations +10 / -10 % Frequency 50 / 60 Hz Machine connected load 9 kVA Max. main fuse for machine 20 A gG Required short-circuit power 700 kVA Dimensions / Weights Overall height 2200 mm Installation area (WxD) (excluding coolant and options) 1600 x 1710 mm Total machine weight 1970 kg (excluding coolant and options) Coolant tank (standard, empty) 60 kg Chip Conveyor Hinged belt conveyor for wet and dry machining Discharge height 500 mm 4th Axis / NC Rotary Table Resolution 0.01° Max. speed 44 rpm Max. torque 20 Nm

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 1500 kg Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 50–4000 Number of axis 2 This EMCO Emcomat E-200 MC was manufactured in 2019. A robust horizontal turning machine featuring a distance between centers of 1000 mm, center height of 200 mm, and a spindle speed range of 50-4000 rpm. It includes a tailstock and ball screws on X and Z axes. Weighing 1500 kg, this demo machine is in excellent condition, like new. Contact us for more information about this machine. Application Types Turning Lodpfx Abjxp Snco Uohn

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm Lhjdpfx Abju Ixw Aj Ujn centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Ledpjxp Iyhsfx Ab Uohn Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: excellent (used), Year of construction: 2023, Chip conveyor, year 2023 Lsdpexqlppefx Ab Ushn ZXM940110

Condition: used, Year of construction: 2010, turning diameter 220 mm turning length 310 mm control Siemens 810 D powerline turning diameter over bed 430 mm hollow 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Pos. total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Ljdpfx Aboxp R Eas Uehn Technical Features & Accessories: - C-axis - Documentation - Backup - EMCO LM 800 bar loader Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Lhedpsxp Hudefx Ab Usn

Year of construction: 2005, condition: ready for operation (used), Main Drive Number of axis 2 Movement X-Axis Movement 260 Z-Axis Movement 610 Lhsdpfjxpyvzox Ab Uen Media Chip conveyor Yes Additional Equipment Bar Feeder: Equipped with Emco bar loader Chip Conveyor: Included Part Catcher: Integrated turret has 12 positions (all are driven) maximum bar diameters that can be processed are Ø65mm due to the drawtube VDI 30 This EMCO Turn E65 was manufactured in 2005. A horizontal turning machine equipped with an Emco bar loader, chip conveyor, and an integrated part catcher. It features a single turret with driven tools, enhancing its functionality. If you are looking to get high-quality turning capabilities, consider the EMCO Turn E65 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel Lhsdpfsu N Avxox Ab Uon accessories: a few test tables and plates (comparable with the pictures) *

Condition: good (used), Offered here is a lathe manufactured by Emco. The machine is in good condition and can be inspected under power in our warehouse. The machine will be loaded onto a truck free of charge. Manufacturer: Emco Model: Maxxturn 45 Control: Siemens Sinumerik 840D Year of manufacture: 2008 Technical Data: Swing over bed: 430 mm Swing over cross slide: 300 mm Max. turning diameter: 300 mm Max. part length: 480 mm Max. bar capacity: 45 mm Centre distance: 670 mm Distance main spindle - sub spindle: 720 mm Ledpfxexq D Uqo Ab Ushn Travel X-axis: 160 mm Rapid traverse: 24 m/min Travel Z-axis: 510 mm Rapid traverse: 30 m/min Travel Y-axis: +40/-30 mm Rapid traverse: 10 m/min Travel Z2 (sub spindle): 510 mm Traverse speed: 30 m/min C-axis resolution: 0.001° Rapid traverse: 1000 rpm Main spindle speed range: 0-6300 rpm Power: 8/13 kW Sub spindle speed range: 0-6300 rpm Power: 7/10 kW Disc turret VDI 25 Number of tool stations: 12 (all driven) Driven tool stations: 12 Speed range: 0-6000 rpm Drive power: 4 kW Machine dimensions (LxWxH): 2575 x 1790 x 1958 mm Machine weight: 4000 kg Scope of delivery includes: Various collets Various static tool holders 8x driven tool holders 1x power chuck and 1x additional collet chuck Chip conveyor Short bar loader Emco LM 800 Various additional spare parts on Euro pallet

Condition: excellent (used), functionality: fully functional, EMCO Maximat Super 11 – Precision Lathe in Very Good Condition For sale is a used EMCO Maximat Super 11, a robust and precise universal lathe "Made in Austria." This machine is ideally suited for workshops, training centers, or demanding hobbyists who value quality and accuracy. The machine is pre-owned but well-maintained and fully operational. All gear shifts are smooth, the guides are in good condition, and the machine has been regularly serviced. Technical Specifications: Center height: 140 mm Distance between centers: 600 mm Spindle speed range: 55 – 2200 rpm (8 geared steps) Tailstock: MT2 taper Tool holder: Quick-change toolpost Lighting: Integrated LED work light Weight: approx. 360 kg Dimensions (L × H × W): approx. 1.3 m × 1.2 m × 0.6 m Condition & Accessories: Machine runs quietly with low vibration Tailstock is smooth and easy to adjust with high precision Quick-change toolpost included Lsdpfxexqx Nvs Ab Uohn LED work light for optimal visibility Various clamping devices or tools can be purchased additionally upon request (by arrangement) Price: The price is within a reasonable range and negotiable. Open for price discussions upon serious interest. Miscellaneous: Collection preferred, viewing by appointment possible Machine can be shown under power

Condition: used, Technical Data: Centre height: 275 mm Distance between centres: 3000 mm Swing diameter over bed: 550 mm Lhedpfx Absxpgrpe Ujn Swing diameter over cross slide: 340 mm Spindle bore: 105 mm Spindle nose: Camlock 8" Speed range: 0 - 2500 rpm Motor power: 19.5 kW Equipment: - CNC control FAGOR 8055 - 4-position turret head - 3-jaw chuck ø 315 mm - Steady rest

Condition: excellent (used), EMCO Model E 900 Control type SIEMENS SINUMERIK 810 D Lhodjpgng Hspfx Ab Uon Table dimensions 1000 x 520 mm Linear guides ✓ Travel X-axis 900 mm Y-axis travel 500 mm Travel Z-axis 500 mm Axes 3 Spindle speed 12,000 rpm Spindle mounting ISO 40 - DIN 69871 Tool magazine 20 places Coolant supply through the spindle ✓ Spindle motor power 13 kw Year 2017 CE machine ✓ Overall dimensions 2570 x 2445 x H 2920 mm

Condition: ready for operation (used), Year of construction: 2019, Control Unit Lhodpfexpklasx Ab Uen Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Lodpfx Aou Ixwisb Ushn Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: F4N K5 105, Emco FB5; year of manufacture 1997; accessories: sub-spindle head + approx. 10 pcs SK 40 tool holders; Prototrac control Lsdpfexqf Ewjx Ab Uehn

Condition: used, Year of construction: 2005, Machine used for training purposes Emco E 65, year of manufacture 2005, control Siemens 840 D, Lhedpfowv N Sujx Ab Usn travel X/Z 210/610 mm, maximum bar capacity Ø 65 mm, driven tools, C axis, main spindle up to 4,200 rpm, 12-position turret, VDI 30 tool holder, tailstock, chip conveyor, coolant system, oil mist extraction,

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m Lodpfxsvvtpxe Ab Ujhn transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Year of manufacture 2000, Siemens 810 D control system, X/Z travel 210/610 mm, 12-station VDI 30 turret, all stations driven, driven tools up to 4,000 rpm, collet chuck, Lsdpfx Abjwd E N Sj Ushn tailstock, C-axis 0.001°, spindle speed up to 6,300 rpm, coolant system, chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Condition: used, Year of construction: 1990, Technical details: Ledpfjvc Awrsx Ab Uohn x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm Lodpfxsvbhcdj Ab Uohn y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *