Used Electro Motor for sale (24,831)

Condition: ready for operation (used), Electro Adda FC71FE-8/2 3~ motor with Bonifiglioli MVF 49/F angular gear (i=14) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 14 mm ,used, small traces of use, 100% functional Kwodpfx Adoi D Hruo Net

Condition: ready for operation (used), Electro Adda FC80FECC-2 3~ motor with SCM gearbox (i=3.9:1) , serial no. according to photo , hole spacing of mounting holes: 140 mm, Ø hole for output shaft: 12 mm hexagonal ,used, normal signs of wear, 100% functional Kwedpfxoi D Hr Ue Ad Not

Condition: ready for operation (used), Electro Adda FV71FE-8/2 3~ motor with Bonifiglioli angular gear MVF 49/P (i=7) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 30 mm ,used, normal signs of wear, 100% functional Kedji D Htcepfx Ad Newt

Condition: new, SIEMENS Electro Motor , 22 KW, 50 HZ, 1470 l/min Ksdpetqx T Tefx Ad Njwt

Condition: new, Electro Motor ELSTO, 22KW with gearbox, type A703 UR AL P180, Kodpotqx Ubsfx Ad Newt

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor, two-phase stepper motor -Manufacturer: isert-electronic: two-phase stepper motor 1.8° -Gearbox: 3465 A2411-9212-A2 -Engine: Oriental engine type 2GK9K -Shaft: Ø 8 x 27 mm -Quantity: 6x stepper motor available Ksdpfx Aoq Adpijd Nowt -Price per piece -Dimension: 135/60/H60 mm -Weight: 0.9 kg/pc.

Condition: used, functionality: fully functional, V: 230-400 kW: 5.5 Kwedpfxsya Dm Hs Ad Not Tank capacity: 500 L

Condition: used, In this offer you purchase a used slitter rewinder ‘Neolt Electro Trim 150’ Object of sale: 1 x Neolt Electro Trim 150 with the following equipment: incl. underframe 150cm roll width possible Kodjwln I Topfx Ad Newt electric from 2021 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, power capacity / kW volt / V ampere / A total power requirement 12,6 kW MOLL engine Type: Y2PE-160MA2B3 / ML1907010375 V: 400/690 A: 19.6 / 11.3 / 19.5 Kwodpfxeig A Eks Ad Nst Speed: 2950 / 3540 Total power: 11kW / 12.6kW Condition: New

Condition: new, power capacity / kW volt / V Kwsdouddlhspfx Ad Not ampere / A total power requirement 21,3 kW MOLL engine Type: Y2HE-180M4 PTC / MOLL130920373 V: 400/690 RPM: 1470 / 1764 Total power: 18.5kW / 21.3kW Condition: New

Condition: new, power capacity / kW volt / V ampere / A total power requirement 42,5 kW Kodpeif Sc Defx Ad Newt MOLL-Motor Typ: Y2PE-200LB2B3 / ML2001011999 V: 400/690 A: 64,0 / 37,1 / 64,4 Rpm: 2970 / 3564

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 2 l/h, fuel tank capacity: 20 l, color: orange, overall weight: 2,320 kg, operation weight: 2,200 kg, lifting height: 4,190 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.068 m³, suspension: other, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-25P is a compact, high-performance 2.5-ton mini excavator designed for professional use in construction, landscaping, as well as municipal and agricultural applications. Its robust build and advanced load-sensing hydraulics ensure efficient and precise operation even under demanding conditions. Thanks to the boom swing function, this machine is ideal for confined worksites and standard earthmoving or foundation tasks. Key Technical Features: - Boom swing for precise operation in tight spaces - Stable undercarriage (1,300 / 1,500 mm) providing excellent stability - Powerful Yanmar diesel engine - Load-sensing hydraulic valves for sensitive control - High-capacity axial piston pump - Hydraulic piston drive and swing motors - High digging and breakout forces - Durable rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cabin: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Ground clearance upper carriage: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: Kjdpfx Adsx Hg Ete Njwt - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Drive & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Swing speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 23 kN - Ground pressure: 26.5 kPa Working Range: - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm - Max. dumping height: 4,190 mm - Max. dumping height: 2,880 mm - Min. turning radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. lowering depth: 300 mm Undercarriage: - Track material: Rubber - Track model: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Working pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Equipment: - Boom swing - Fully enclosed cab with heating - Dozer blade - Joystick control - LED work lighting - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel frame Accessories & Attachments – SET includes: - 25 cm trench bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 RRP Maintenance & Warranty: - Service every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts available ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: - Excavators available immediately - Europe-wide delivery can be arranged on request This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €22,000 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-20PRO is a modern, powerful, and versatile 2-ton mini excavator designed for continuous professional use in construction, civil engineering, and landscaping. Thanks to its robust steel construction, state-of-the-art load-sensing hydraulics, and compact dimensions, this machine is ideally suited for work in confined job sites as well as demanding earthmoving and foundation operations. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, offering excellent operator comfort, safety, and productivity, even in cold, rainy, or windy conditions. Key Technical Features: - Swing boom for precise operation in tight spaces - Telescoping undercarriage 990–1,300 mm for maximum stability - Integrated travel motors with high/low speed - Load-sensing hydraulic valves – energy efficient & highly responsive Kwjdpfx Aex Hg D Ajd Not - Axial piston pump with variable displacement - Slew drive with plunger-type rotation motor - Dual cast counterweights for superior stability - Wear-resistant rubber tracks 230×48×70 Weights & Dimensions: - Operating weight: 1,800 kg - Bucket capacity: 0.04 m³ - Wheelbase: 1,230 mm - Track length: 1,595 mm - Ground clearance (superstructure): 460 mm - Counterweight swing radius: 735 mm - Undercarriage width: 990 / 1,300 mm (telescopic) - Track width: 230 mm - Track height: 380 mm - Transport length: 3,600 mm - Overall height: 2,450 mm - Bucket width: 485 mm Engine: - Kubota D902-E4B-CBH-1 - Displacement: 0.898 l - Engine output: 11.8 kW at 2,300 rpm (16.1 hp) - Max. torque: 51.3 Nm at 1,800 rpm - Engine oil capacity: 3.7 l - Fuel tank: 19 l Travel & Performance Data: - Travel speed: 2.2 / 4.5 km/h - Slew speed: 9.5 rpm - Maximum gradeability: 30° - Maximum drawbar pull: 18 kN - Ground pressure: 29 kPa Working Range: - Max. digging reach at ground level: 3,840 mm - Max. digging reach: 3,910 mm - Max. digging depth: 2,270 mm - Max. digging height: 3,570 mm - Max. dumping height: 2,480 mm Dozer Blade: - Max. lift height: 280 mm - Max. lower depth: 190 mm Hydraulic System: - Pump type: Axial piston pump - Flow rate: 64 l/min - Operating pressure: 23 MPa - Hydraulic valves: Load sensing - Slew motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors - Hydraulic oil tank: 17.5 l Equipment: - Fully enclosed cabin incl. heating - Joystick control - LED work lights - Comfort seat - Rubber tracks 230×48×70 - Dozer blade - Hydraulic safety valves - Reinforced steel construction - Dual cast counterweights Standard Attachments & Accessories – SET includes: - 25 cm trenching bucket - 50 cm trenching bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts ex-stock Rheda-Wiedenbrück (DE) Delivery & Availability: The excavators are available immediately. Europe-wide delivery can be arranged on request. This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €20,500 RRP Location: Rheda-Wiedenbrück

Condition: used, Year of construction: 1999, Electric motor, year approx. 1999 Kedpoxu Ewnsfx Ad Nowt

Condition: used, Electric motors Kjdpfxoxfvzrj Ad Newt

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 5 h, Equipment: air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, The HT25PRO is a high-performance 2.5 t class premium mini excavator, designed for professional and demanding applications. As a larger and more powerful version of the HT20, it offers greater power, reach, stability, and productivity. Equipped with an original Kubota diesel engine, load-sensing hydraulics, and a reinforced manganese steel structure, the HT25PRO is ideally suited for civil engineering, landscaping, municipal applications, and agricultural operations. Technical Specifications: Ksdjx Hhu Nepfx Ad Nowt Engine: Kubota D1105 3-cylinder diesel engine Output: 14 kW rated power (continuous operation), up to 18.4 kW peak power (no selectable power modes) Very low vibration Fuel efficient Built for continuous operation Hydraulics: Load-sensing hydraulic pump Load-sensing multi-way hydraulic valve Hydraulic pump pressure: 25 MPa System pressure: 22 MPa Hydraulic flow rate: 61.6 l/min Travel motor with high/low speed (Japan standard) High-quality, heavy-duty hydraulic lines Dimensions & Weight: Length × Width × Height: 345 × 143 × 250 cm Chassis width: 140 cm Operating weight: 2,500 kg Working Range: Boom swing left/right Rotation function Max. digging depth: 2,370 mm Digging/loading height: 3,500 mm Undercarriage & Structure: Manganese steel undercarriage with high torsional rigidity Extendable/telescopic undercarriage Laser-cut, high-precision steel components Heavy cast iron counterweight Equipment: Steel tracks (very robust, professional-grade) Fully enclosed cab Heating and air conditioning Excellent all-round visibility Ergonomic operation Joystick controls LED work lighting Comfort seat Reinforced steel construction Accessories / Attachments (available as a set): 25 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler incl. solenoid valves and oil lines Optional: Hydraulic auger set up to Ø 300 mm (Auger bits 150 / 200 / 300 mm + extensions) – SET PRICE €850 RRP Maintenance & Warranty: Service intervals every 250 operating hours or annually Warranty: 12 months Europe-wide Service & spare parts ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: Short delivery times possible (depending on stock) Fixed-date delivery January 2026 guaranteed Europe-wide delivery organized on request This machine meets the highest safety standards and is CE certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €23,500 RRP Location: Rheda-Wiedenbrück

Condition: used, Electric motor, reversing motor, induction motor, reversible motor -Manufacturer: Sesame Motor Corp., Electric Motor Reversible Motor -Type: unfortunately without type designation -Speed: approx. 1480 rpm -Shaft: Ø 11 x 20 mm Kwedpfx Adsp Udipo Not -Quantity: 3x motor available -Price per piece -Dimension: 150/90/H90 mm -Weight: 3.0 kg/pc.

Condition: used, servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller, servo module, stepper motor driver -Manufacturer: Oriental Motor, Controller Module with stepper motor driver -Controller modules: type CM 10-1 -Stepper motor driver: Type ARD-K -Delivery/Price: complete Kwodpfx Aeuuu E Usd Not -Total dimensions: 90/55/H105 mm -Weight: 0.4 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, stepper motor driver Kwodpfx Ajm Ui H Ijd Not -Manufacturer: Oriental Motor, 2-phase stepping motor driver stepper motor driver unused original packaging -Type: CSD2120-T -Dimensions cardboard: 140/90/H70 mm -Weight: 0.2 kg

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm Kwjdpfxei Huvho Ad Nst -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor unused original packaging Kwodpfx Aem Ui Ided Not -Type PK268-02B -Shaft: Ø 6 x 18 mm -Dimensions cardboard: 140/80/H70 mm -Weight: 1.1 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Oriental Motor, Vexta servomotor stepper motor from Tiromat 3000/430 vacuum packaging system -Type PH268-E1.6-A1 -Shaft: Ø 6 x 20 mm -Number: 3x stepper motors available -Price: per piece -Dimensions: 97/57/H57 mm -Weight: 0.2 kg/pc. Kwodpfxohwgdxo Ad Nst

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor -Type C7219-9012K -Shaft: Ø 5 x 18 mm -Dimension: 67/42/H42 mm -Weight: 0.3 kg Kwedsq Dr Scspfx Ad Net

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Motor comes from a Weisser Heilbronn Type 29 CNC lathe -Speed: 2000 rpm -Power: kW -Design: B5 -Shaft diameter: Ø 30 mm -Quantity: 1 piece available -Dimensions: Kwedpfxsff Aqzj Ad Njt -Weight: 20 kg

Condition: good (used), Neolt Electro Power Plus 145 Trimmer The device is fully functional and ready to use. Description: Ideal for trimming drawings, photos, posters, etc. Rotary hardened steel blade Kwjdsx N Dxpjpfx Ad Net Transparent plastic pressure plate for precise cutting Sturdy base for creating a professional workstation Cutting length: 145 cm