Used Electromagnetic for sale (347)

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line.  Technical details - Capacity: 9000 containers/h (varies according to bottle volume and product).  - Container  - Max. Diameter: 100mm  - Max. Height: 300mm  - Control Siemens S7 Single machines  Kdsdpfxjmfqm Do Ah Eet Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  - Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted - Positronic control system for optimal adaptation to downstream filler - Machine, completely internally wired with attached control cabinet in mild steel, painted - Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK - Fully automatic rotary filler - Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS - Number of filling stations: 16 filling stations - Filling valve diameter: Ø12mm - Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm - Fully automatic round capper - Number of capping heads: 5 - With torque adjustment via slip clutches - With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator - With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 - Applied safety and machinery directives CE compliant - Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation - Force shunt free current transfer at the load cell - Front protection to reduce interference on the weighing result - Stainless steel control cabinet - Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution - Flexible operability due to tiltable stainless steel operator terminal - Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  - Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III - Tandem design - Max. Label height: 120mm  - Photocell for label scanning - 2 x automatic winding station incl. counter pressure plate - Mounting device with height adjustment for lateral label dispensers - With adjustable side guides - passage width up to 150mm

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. Kodpfx Aezwpxneh Ejdt The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: P260302015, total height: 350 mm, total width: 300 mm, total length: 800 mm, overall weight: 80 kg, machine base height: 180 mm, INVENTORY STATUS: 3 UNITS For sale is a professional, multi-section process module manufactured to hygienic standards, designed for the food, brewing, or chemical industries. Main components of the set: • Pumps: Series of centrifugal pumps with stainless steel housings (protection against flooding/hygienic standard). • Flow measurement: Integrated electromagnetic flowmeters (visible control units with LCD displays, e.g., from Endress+Hauser or a similar class). • Construction: The entire unit is mounted on a stable stainless steel frame (skid type), which facilitates transport and installation in a new production line. • Piping: Complete acid-resistant piping with flanged and hygienic connections. Key advantages: • Precision: Thanks to the flowmeters, the system allows for very accurate dispensing of liquids or monitoring of media transfer. • Hygiene: Stainless steel construction allows operation in CIP (Cleaning In Place) systems. • Ready for operation: Complete module ready to be connected to an existing process installation. Kjdpfx Ajzrmvash Eodt Technical condition: Very good, the installation is regularly serviced and operates in a clean production environment.

Condition: good (used), Hydraulic decoiler, movable on rollers Load capacity 20,000 kg (with decoiler support 30,000 kg) Hydraulic expansion: max 550 mm min 480 mm Decoiler drum: 1700 mm Drive: Gearbox with electric motor and electromagnetic clutch, hydraulically braked with proportional valve Pressing device with drive roller was available. Drawings for a new one suitable for the decoiler, as well as decoiler support for a load capacity of 30,000 kg, are available. Kdjdpfew Up N Nox Ah Eet

Condition: used, Industrial Bowl Feeder and Linear Feeder, Lysta Vibrator, Used machine Manufacturer: Lysta Vibrator (Albertslund, Denmark) Type (Vibratory Bowl Feeder): D 600/750 (Serial number: 1874) Type (Linear Vibratory Feeder): 400 x 75 (Serial number: 472) Condition: Used, industrial execution Overall dimensions: 710 x 1360 x 1450 mm Technical and operating parameters: Bowl diameter: 450 – 750 mm Linear track size: 200 x 700 mm Electrical data (Bowl Feeder): 220 V / 230 V, 1 phase, 50 Hz, 3.5 A Electrical data (Linear Feeder): 220 V / 230 V, 1 phase, 50 Hz, 0.3 A Design / Operation: Electromagnetic orientation and feeding system with rotary bowl drive and linear transfer track. Suitable Application Areas: This high-precision Danish vibratory feeding system is perfectly designed for automated sorting, orientation, and feeding of small components: Assembly lines and automated cells: Feeding fasteners (screws, nuts, washers), plastic parts, or electronic components in correct orientation to assembly machines or robotic workstations. Packaging systems: Controlled, continuous, or counted feeding of small products into packaging machines. Kodpfszwdzdsx Ah Eedt Plastics and metal processing: Orienting and singulating bulk mass components for machining, inspection, or sorting stations.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Kdsdpfey Ez Erex Ah Eot Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: new, Year of construction: 2026, Heavy-duty, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grids Integrated small parts support made of wood Super Silent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight: approx. 910 kg Cutting depth: 60 mm Saw motor power: 3.9 kW (5.3 HP) Saw blade diameter: 250 mm Kodpfx Aheihahbe Eedt Saw blade bore: 30 mm *1 Emission sound pressure level at the workstation LpA: 82 dB *2 Saw blade speed: 5250 rpm 2 extraction ports: ø 100 mm Connection value: 4.8 kW Mains connection: 3 x 400 V / 50 Hz Cutting range: L: 4600 mm; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - VSA scoring saw, stepless adjustment - Strip stop - Mechanically braked support rollers - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available - Photo shows optional digital display, which is not included in the offer.

Condition: used, Year of construction: 2025, New demonstration machine! Price on request! The CONTROL has always defined its own class – the premium class for vertical panel saws. But even this leading position doesn't stand still. We have developed the CONTROL into the premium class's vertical cutting center, with increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved ease of operation in every detail. Saw frame: • Machine components manufactured to a precision of 1/100 mm • Solid, self-supporting, firmly welded, and torsion-resistant saw frame • Full-surface support table made of birch plywood with integrated small parts support • Auxiliary fence profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller locking during the sawing process Saw beam: • Stable, durable saw beam steel construction • Automatic saw beam locking with cutting interface detection Saw unit: • Backlash-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting accuracy • Powerful, high-torque 5.5 kW motor (7.5 HP) • More comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic lowering and pivoting of the saw motor • Pneumatic clutch for easy switching to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control: • 12" touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Infinitely variable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension setting: • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Mounting: • Wall or free-standing mounting possible Saw blade: 300 mm, scoring saw, 60 teeth Cutting range: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm, consisting of: 1.00 Cutting interface distance vertical 1000 mm 1.00 Language documentation DE 1.00 Saw motor 1-phase, 400V, 50Hz, EVO/CON 1.00 Feed speed 10-25 m/min 1.00 Scoring saw unit VSA (scoring saw infinitely adjustable) 4.00 Free-standing support, complete 1.00 Small parts support, aluminum, complete (2-part) 1.00 STRIEBIG ExpertCut CON consisting of: - Electronic positioning system EPS-X - Automatic saw beam positioning ASP - User guidance with STRIEBIG ExpertCut software license for 1 office workstation (network license) - Label printer - Network connection - Operating manual - Paper holder 1.00 UPS 24VDC for touch PC (uninterruptible power supply) 1.00 Block parts, initial license 1.00 Service: data import / label layout (remote) 1.00 Basic training STRIEBIG cutting optimization (online training) Kedpfx Aezx E T Doh Ejdt Storage location: Rieth

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm Kedpfx Aoynnczoh Ejdt 590 x 450 mm 125 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, functionality: unexamined, Year of construction: 2019, The Dematic line is disassembled and ready for transport. Manufacturing date: 2019/2020. Technical throughput: Kdsdpjzxrtksfx Ah Eet – Conveyor capacity from the mezzanine to the induction stations – 1,800 cartons per hour – Conveyor capacity from the TTU sorter to VAS and the outbound sorter – 1,560 cartons per hour Loading units: a) Cartons on internal conveyors: – Average weight: 15 kg/carton – Dimensions: 600 x 400 x 400 mm – Weight: from 1 to 30 kg/carton b) Cartons on outbound conveyors: – Dimensions: 800 x 400 x 340 mm – No lid – Lid is applied at the end before shipment – Weight: from 1 to 25 kg/carton – Average weight: 15 kg/carton The line is equipped with two TTU sorters. The TTU sorter is a compact sorter that works perfectly in narrow spaces. The TTU is capable of sorting both plastic bags and cartons. Each sorter consists of 2 infeed areas and 300 discharge locations. The two combined sorters have 4 infeed lines and 600 discharge locations. Cartons on the conveyor are identified and transported to the appropriate zone on the sorter. Sorter equipment: – 32 workstations with 16 screens – 16 screen supports – 20 RF scanners (10 per sorter) – 4 pallet discharge locations – SCS server – 2 Lantech case erectors and Robatech glue applicators – 2 Altek 700 kg scissor lifts, located on the outside of each sorter. Access to the platform is secured by a Troax system – when the lift is activated, access to the loading area is prevented by an electromagnetic lock. Additionally, the platform is enclosed with welded wire mesh. – 2 Fischer platforms – workstation for 12 employees (6 on each side), equipped with Data Logic barcode scanners and a Beckhoff CP3716-1071-0010 monitor.

Condition: used, Year of construction: 2001, functionality: fully functional, OKAMOTO ACC 64 DX Surface Grinding Machine Year: 2001 TBC Servo Automatic Downfeed 600 x 400.0mm WALKER HAGOU MAGNET Kedpfezv Ef Usx Ah Eodt Electromagnetic chuck Paper coolant filtration system

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Mercedes Benz Sprinter 519 CDI with Leistikow B55 High-Pressure Cleaning System Internal Number: #527 Leistikow B 55 * Auxiliary drive from the Sprinter * High-pressure pump AQUABAR KF32/36 * Approx. 120 liters/minute at 170 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN19 * 2nd hydraulic HD hose reel for approx. 80m DN13 * Filling hose reel with approx. 60m DN20 * Approx. 1,600 liter water tank * Low water level protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED warning lights * Various storage options * Adjustable heavy-duty shelf * Standard cleaning nozzle equipment Special equipment: 2nd battery (auxiliary battery) in the engine compartment, 3-button remote control for central locking, trailer socket 13-pin, battery disconnect switch 1-pole, driving assistance system: traffic sign recognition, tachograph operation in front under the headliner, chassis: stabilization level II, all-weather floor mats, vehicle without lashing eyes, gearbox lock for auxiliary drive, cup holder in front, grab handles A-pillars, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), comfort lighting in the passenger/cargo area, charging package dashboard (USB connections and 12V socket additionally), cable duct on the rear portal, cable duct on the side wall, navigation system for MBUX multimedia system, fog lights with cornering light, auxiliary drive 2 B with reduction gear, parameterizable special module, cross member with integrated step, sliding door cargo/passenger area left, mud flaps at the rear, seats in the cab: driver's seat comfort, fuel gauge for auxiliary heater, separation relay for battery additionally, front axle reinforced, preparation for gearbox oil cooler, winter package, power assist for sliding door left, power assist for sliding door right Ksdpsyzllbjfx Ah Eedt Additional equipment: 3rd brake light, storage compartment above the front window, storage compartment below the dashboard passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assistant, outside temperature indicator, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact switch, automatic switching of headlights, entry handle on the rear pillar on the right, entry handle for the sliding door on the cargo area partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: start-up information assistant, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: Intelligent Speed Assistant, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, speed limiter 90 km/h, body/superstructure: van high roof standard, instrument cluster with color display, communication module (LTE) for digital services, fuel

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Kdedpjip Utasfx Ah Eot Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2026, Delivery time: immediately ex works. Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug - Mechanical feed for Z-axis - Including electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: right/left rotation TECHNICAL DATA Continuous/standard drilling capacity (mm): R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R3 = M30x3.5 Spindle taper MK III Drilling depth: 125 mm Throat: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Digital speed indicator Digital drilling depth indicator Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150–700 mm Spindle speeds, stepless: R3 (2-stage with intermediate shaft) 0–4,000 rpm Kjdpfx Ahox Hh Dwj Eodt Accessory coolant system (€605) - Separate tank - Capacity: max. 15 l - Pump output: max. 13.4 l/min Accessory drilling package 5 (€855) - Vice [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3–16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR OFFER TODAY!

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Kodpfx Aofmh Tloh Esdt Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700,- Accessories: Coolant system (€ 620,-) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Accessories: Drilling package 5 (€ 875,-) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) Kodpfx Ahelfdufo Ejdt R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1 = M30x3.5 / R2 = M24x3 / R3 = M36x4 Spindle MK IV Drilling depth: 160 mm Overhang: 300 mm Column diameter: 140 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without additional charge Additional charge for R3: € 2,250 Accessories drilling package 6 (€ 910.00) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: Free to your site including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Ksdpfjzvgk Sox Ah Eedt Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: good (used), Drill with coordinate table and sliding head Brand: IBARMIA Model: B70P Capacity: Up to 70mm drill Characteristic: - Transmission: By gears. - Coordinate table with 2 X-Y axes. - Automatic advance. - Number of automatic advances: 6 - Number of speeds: 24 - Chap. max. drilling capacity in 70Kg steel: 70mm - Chap. max. drilling capacity in 200Hb cast iron: 80mm - Electromagnetic clutch Kdedpfsh Rydnox Ah Eot - Automatic tool ejector - Motorized moving head - Bidirectional rotation. - Head travel: 1500mm - ANILAM digital X,Y coordinate display. - Table tours: X570 x 260mm - Table dimensions: 500x1000mm - Manual oiler Cooling system using coolant. It is delivered revised and with the protections for CE compliance.

Condition: new, functionality: fully functional, This listing serves exclusively for informational purposes and does not constitute a legally binding offer. The KINGWAY WE500 electric wheelbarrow is a modern and environmentally friendly solution for the fast and comfortable transport of materials in demanding conditions. Thanks to its compact dimensions and well-thought-out design, the WE500 is ideal for use in narrow passages, gardens, construction sites, warehouses, and many other locations where mobility and safety are crucial. TECHNICAL DATA: Model: DR-MD-02 Maximum working time: 8–10 hours Brake system: Electromagnetic brake Loading volume (L × W × H): 1050 × 720 × 400 mm Charging time (from full discharge): approx. 12 hours Travel speed (forward/reverse): 5.0 / 3.0 km/h Kdodpfx Ahsyk S Rbs Eot Wheels: Front: 16×5.5-8, tubeless Rear: 13×5-8, tubeless Gross/net weight: 723 / 715 kg Transport dimensions: 1340 × 830 × 880 mm Maximum load capacity: 500 kg Motor power: 1000 W / 48 V Battery: 4 × 12 V, 32 Ah Free 12-month warranty – after this period, we offer all spare parts as well as professional service if required. PRICE: €1,600 NET €1,904 GROSS

Condition: as good as new (ex-display), functionality: fully functional, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 300 mm, total length: 6,689 mm, total width: 1,766 mm, total height: 3,055 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Further technical data Vertical cutting height: 2,150 mm / 2,150 mm (with lowering function) Horizontal cutting height: 2,100 mm Width: 1,766 mm (free-standing) / 1,383 mm (wall-mounted) Cutting length: 5,300 mm / 3,000 mm / 5,000 mm (with lowering function) Saw frame Self-supporting, torsion-resistant, welded frame with latticework reinforcement on 4 solid machine feet Automatically deflecting timber support wall TRK1 with integrated small parts timber shelf Panel lowering device (PAV) with 2 panel lowering units for board materials up to max. 160 kg (80 kg per unit) Length stop profile above central support up to zero cut position Continuous length stop profile above roller support with flip stop Precise 17-fold roller support, pneumatically braked Swivelling central support along the entire length, support grid made of aluminum with plastic pads Unit for wall mounting Aluminum small parts support (1 pair), can be used individually Saw beam & saw unit Stable, durable saw beam with double locking Robustly mounted motor carriage for high cutting precision Pneumatic clamping of the motor carriage Powerful, high-torque saw motor 5.5 kW (7.5 HP) Integrated, high-performance TRK dust extraction system for external extraction unit Supersilent sound insulation Electromagnetic motor brake Paper holder Control Clear push-button control for easy operation Positioning of the panel lowering device via two-hand control User guidance via status LED indicators on panel lowering units Operating hours counter Dimension adjustment Programmable cam switch for recurring dimensions Laser-guided display of horizontal cuts Digital measurement system DMS-Y, including motorized fine adjustment Digital measurement system DMS-X, including manual fine adjustment, installation selectable above central or roller support Ksdpoxazapefx Ah Eedt Optional equipment 006 Striebig free-standing base support 103 Digital measurement system DMS, X-axis 104 Digital measurement system DMS, Y-axis 105 Additional digital measurement system DMS, X-axis 200 Pro Lock Easy-Fix tool clamping system at the saw blade 201 Scoring saw unit VSA 300 Additional panel lowering unit 401 Complete aluminum small parts support Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: used, Surface Grinding Machine BLANCHARD type 20D Shelf diameter: Ø 915 mm Shelf speed: from 5 to 27 RPM Grindstone diameter: Ø 500 mm Maxi height under wheel: 450 mm Spindle motor: 30 CV - 715 RPM Electromagnetic chuck Kdjdpezwgumjfx Ah Est Rapid Up/Down Voltage 220 V Tri Dimensions (L x W x H): 3700 x 2000 x 2600 mm Weight: 6 T

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 units of recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery. - Temperature 200°C, can be increased to 250°C! - Charging car, 5 units available, modification on request. - Homogeneous temperature distribution of +/- 10°C. - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel - Program execution with a good sensor as a cascade control system - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min - Electromagnetic door locking system - Rated power: 180 kW - Connection power: 241 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity Kdjdoy Tkfwepfx Ah Eot We would be pleased to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Furnaces, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Curing oven, Post-curing of liquid crystal windows, CFRP support structure, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, immediately available -Temperature 200°C, increase to 250°C possible upon request -Charging car, 5 units available, modification possible upon request -Homogeneous temperature distribution of +/- 10 °C -Internal dimensions W x D x H: 3750 x 1400 x 2300 mm -External dimensions W x D x H: 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with good sensor as cascade control -Temperature limiter -Signal tower -Directly accessible, with grid rails -Exhaust air volume flow 140 m³/min -Electromagnetic door lock -Rated power 180 KW -Connection 241 KW!!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Ksdpjy Avqwofx Ah Eedt Furnace, Oven, Ovens, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Fusing, Postcuring, Post-curing of liquid crystal windows, CFRP support structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg Kdsdpfx Asztn Rueh Eot 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Kedpfeztn Nkox Ah Eodt Machine available immediately 12-month warranty.