Used Automatic Lathe for sale (25,131)

Condition: used, Year of construction: 1997, Technical details: Kodpfx Aswl Nm Dshvedi number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 8,6 t spindle drive motor: 11 kW

Condition: used, Year of construction: 2008, Technical details: Kedpfx Aholuhcgjvedi number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The machine can be inspected at our warehouse until March 3rd after it is commissioned at the factory. Kdsdpfx Ahoyh Itwsvji

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Kdedpfeydaadox Ahvei Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Kodpfx Aoycp Nljhvsdi Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 MAIN SPINDLE Max. bar diameter: 12 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Kdsdpfjycp Ihsx Ahvoi Spindle drive power: 2.2 kW Number of tool positions: 13 SUB SPINDLE Max. bar diameter: 10 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Operating hours: 47,000 EQUIPMENT FMB Minimag bar feeder Note: Dismantling and loading can be handled by the seller for €1,500.

Condition: good (used), Year of construction: 1979, Schütte SF51 6-Spindle Automatic Turning Machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle automatic turning machine with a 51 mm spindle bore, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch, which offers high process stability and flexibility in turning, drilling, and tapping. The machine is valued for its stability and flexibility in the production of demanding workpieces. Technical condition: The machine has been regularly modernized and is in like-new condition. Maintenance: Exclusively professional, scheduled maintenance by specialists. Manufacturer: Schütte Type: SF 51 Curve-controlled multi-spindle automatic lathe Number of spindles: 6 main spindles Control: Conventional Spindle bore: 51 mm Maximum feed rate: 125 mm Maximum turning length: 102 mm Maximum drilling depth: 102 mm Tapping unit Chip conveyor 6-station loading magazine Voltage: 400 V Removal by buyer Due to a planned production changeover, a fixed time window for collection has been defined: Kdedpfoyhpvpsx Ahvji - Period: Week 20 / 2026 - Date window: May 11, 2026 to May 15, 2026 - Advantage for you: Precise scheduling certainty for your machine transport and commissioning at your plant. All costs for professional dismantling are already included in the purchase price. Item location: 21079 Hamburg "Everything from a single source: We're happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2013, Anno 2013 Specifiche tecniche : Passaggio barra mandrino principale diametro 42 Passaggio barra contro mandrino diametro 30 Corsa asse Z Contro mandrino mm 360 Corsa asse Z torretta superiore mm 235 Corsa asse Y torretta superiore mm 70 (+ - 35) Corsa asse X Contro mandrino mm 140 Torretta superiore con asse Y 8 posizioni Torretta per lavorazioni da ripresa contro mandrino 6 posizioni Kdjdpfxovtm Tle Ahvoi Numero di giri mandrino principale 6.000 Numero di giri contro mandrino 5.000 Numero di giri utensili motorizzati 5.000 CNC Fanuc 0 ì TF Nastro evacuazione particolari lavorati Kit porta utensili fissi + motorizzati Spingi barra IEMCA Boss 545/E

Condition: new, Year of construction: 2025, The machine on offer is a new stock machine. We will be happy to provide you with a suitable quotation. Kdodpfeychtpsx Ahvei

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, spindle bore: 42 mm, rotational speed (max.): 6,500 rpm, power: 23 kW (31.27 HP), The machine on offer is a new stock machine. We are happy to prepare a customized machine offer for you. Kdjdpfx Aeychqujhvji

Condition: good (used), Year of construction: 2007, functionality: fully functional, Max. bar diameter: 20 mm Max. headstock stroke: 205 mm Spindle speed: 500 - 10,000 rpm Max. bar diameter on sub-spindle: 20 mm Max. sub-spindle speed: 8,000 rpm Number of usable tools: 22 Turning tools with multiple tool holders: 6 Ksdpfxoyb R Awe Ahvjdi Driven tools for cross machining: 3-8 Front drilling tools: 4 Rear drilling tools: 4 Driven tool speed: 8,000 rpm Bar feeder FMB turbo 3-26

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: R14507, Year 2008 with Fanuc 18i-TB With LNS Tryton 107 Country of origin: JP Voltage: 200V 3ph 50/60Hz Dimensions: 141x56x140 cm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS (Standard) Number of axes: 6 Number of spindles: 2 Main spindle Max bar diameter: Ø 7 mm Max machining length: 40 mm Stroke: 40 mm Spindle speed: 16,000 rpm Spindle power: 1.1 kW C axis indexing accuracy: 0.0001° Sub-spindle Max bar diameter: 7 mm Spindle speed: 10,000 rpm Power: 0.5 kW C axis indexing accuracy: 1° Tool post 1 Number of positions: 5 Kdodpfx Aoya Aq Rjhvsi Driven positions: 2 Rotating tool speed: 8,000 rpm Tool post 2 Number of positions: 3 End-working attachment Number of positions: 3 Sub-operation Number of positions: 3 All technical details are provided without obligation and subject to errors or omissions.

Condition: like new (used), Year of construction: 2025, functionality: limited functionality, spindle motor power: 60 W, turning length: 9,000 mm, turning diameter over cross slide: 1,400 mm, spindle speed (max.): 160 rpm, turning diameter: 1,600 mm, overall weight: 35,500 kg, rotational speed (max.): 160 rpm, rotational speed (min.): 1 rpm, total width: 2,000 mm, total length: 12,000 mm, working length: 10,000 mm, workpiece weight (max.): 16,000 kg, turning diameter over bed slide: 1,600 mm, power: 60 kW (81.58 HP), warranty duration: 12 months, Machine in like-new condition with CNC, undergoing retrofit. Built originally in 1990, has few working hours due to the factory closure. Fully modernized equipment: electric, electronic, hydraulic, cable, portable chains; new CNC(2025 Edition). Mechanically in like-new condition, fully inspectable. Partially dismantled due to space constraints, partially in operation until installation is completed. Can be inspected at any time, suitable for heavy industrial use. For more technical details, please send request. Price: quote on request. Delivery/installation: transportation options and installation quote available at request. Testing on delivery: available Kdjdpfxjygk I Ds Ahvsi Warranty: 1 year mechanical, electric, hydraulic, 2 year CNC equipment.

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Kdedpfsib D H Rsx Ahvei Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder Kedotzyx Topfx Ahvedi - Pick-up spindle workpiece pusher

Condition: used, Year of construction: 1995, machine/vehicle number: 253057, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Kdedpfoycu Imex Ahvei The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Kjdpfxex U Tchj Ahvodi Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Kjdpfx Ahox U Af Ssvjdi Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Kdsdox U Afxepfx Ahvei Tool capacity: 18 tools Axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Main spindle C-axis: 0.001 degrees Max. sub spindle speed: 10,000 rpm Sub spindle C-axis: 0.001 degrees Kdedpfxsx U Ad Us Ahvei Tool capacity: 18 tools Number of axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor FMB Turbo 3-26 bar feeder

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 5601-0267, turning diameter: 33 mm, overall weight: 4,200 kg, rotational speed (max.): 8,000 rpm, travel distance Z-axis: 320 mm, Equipment: bar feeder, TECHNICAL DETAILS Turning diameter: 33 mm Z-axis travel: 320 mm Rapid traverse (X/Z): 30 m/min Max. ejection: approx. 190 mm Max. spindle speed: 8,000 rpm Kjdpfx Aeyfqt Dohvedi Tool stations: 5+3 MACHINE DETAILS Control: GE Fanuc Series 16i-T Drive power: 5.5 / 7.5 kW Dimensions & Weight Required space (L x W x H): 3.08 x 1.51 x 1.75 m Machine weight: 4,200 kg EQUIPMENT Iemca bar feeder

Condition: excellent (used), Year of construction: 1995, - machine in stock - after a technical review - very good condition - year of production 1995   TECHNICAL PARAMETERS: - turning length max 1300 mm - turning diameter 120 mm - three lower knives - five top knives - steady - hydraulic knife control - automatic control - magazine   Kjdpjd Rkkzjfx Ahvodi Machine dimensions: - length 380 cm - width 210 cm - height 215 cm - weight ~ 3490 kg

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed Kodpfsx Hggwjx Ahvjdi A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) Ksdpfjx Hgkcsx Ahvjdi All longitudinal units are equipped, either fixed or rotating (without collets) A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, STAR SW 20 is a CNC automatic (Swiss-type) lathe offering high precision, strong accuracy and reliable performance. Capacities: 11 axes, 2 spindles, max machining Ø 20 mm, back spindle up to 10,000 t/min. Specs: spindle 3.7 kW, driven tools 1.2 kW (8,000 t/min), carriages with 7 and 5 positions, counter-operation 8 tools (6 driven), rapid traverse 35 m/min, 50 Hz 3x380 V, ~3400 kg, L2600×W1150×H1765 mm. Accessories: bar loader, lamp, 150 l coolant system, ELBARON oil-mist extractor, interface for bar loader. Achieves tight tolerances; typical uses: automotive, watchmaking, tooling, aerospace, medical. Kjdpox S N Sysfx Ahvsdi