Used Automatic Lathe for sale (25,161)

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Kodpfx Ahjwuddvevjdi Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: good (used), Year of construction: 2023, Description Machine: Cincom B16E-VI Type: 5-axis precision lathe with FANUC 0i-TD control system We are offering the machines together with an Iemca Elite 112/32 bar feeder (year of manufacture 2023). Kodpfx Asvzg Skshvsdi Technical Data Machining: Main spindle max. bar diameter: Ø 16 mm Max. machining length without re-clamping: 135 mm Main spindle max. drilling diameter: Ø 6 mm Main spindle max. thread diameter: M 6 Sub spindle max. bar diameter: Ø 16 mm Sub spindle max. drilling diameter: Ø 5 mm Sub spindle max. thread diameter: M 3 Spindles, Tools and Axes: Main spindle speed: 200 ~ 8,000 rpm Sub spindle speed: 200 ~ 6,000 rpm Driven tool speed: 200 ~ 4,500 rpm C-axis indexing main spindle: 1° Maximum number of tool stations: 16 pcs Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tool holder: 10 x 10 mm Drive Power: Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection: 200 V, 50 Hz, 3-phase Main transformer: input voltage 400 V / output voltage 200 V Connected load: 5.2 kVA Pneumatic Connection: Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data: Dimensions: 1,590 x 837 mm Machine height: 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control – CNC contouring control Fanuc 01-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: Incremental and absolute Interface: RS232 Main and sub spindle synchronization Standard Accessories Working area lighting Signal light (red/yellow/green) Part ejection and discharge device Coolant tank and central lubrication Door interlock Part catcher and finished parts container 5 turning tool holders (10 x 10 mm) Coolant system with movable jet arms Power chucking system for main and sub spindles

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dear Sir or Madam, We are pleased to offer you a Traub TNL 26 CNC Swiss-type automatic lathe from the year 2004. The machine is in well-maintained, fully functional condition. Important Note: This particular model is equipped with only one turret. The TNL 26 was also manufactured in versions with two turrets – this offer explicitly refers to the version with a single turret. Technical Data (excerpt): Manufacturer: Traub Kdodpexgg Rmofx Ahvei Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, lower position, 12 tool stations, driven tools (all-head drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ideally suited for the precise production of small and medium batches in the automotive, medical and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex site, ex works Inspection: possible at any time by prior appointment. Should you require further information or wish to arrange an inspection, I am at your disposal at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without regripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. tapping diameter: M 6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. tapping diameter: M 3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm C-axis indexing on main spindle: 1° Kdedpfx Asxgd Rkshvoi Rapid traverses Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive power Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: Min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 x 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Minimum input increment: 0.001 mm Minimum output increment: 0.001 mm (Z) / 0.0005 mm (X) Input mode: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Part ejector and removal unit Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant unit with swiveling spray arms Power chucking system for main and sub spindles

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: MGL203279932, turning diameter: 32 mm, Equipment: bar feeder, documentation/manual, The machine has only been operated in single-shift use! TECHNICAL DETAILS Max. machining diameter: 32 mm Spindles Main spindle: with collet chuck Sub spindle: with collet chuck and air blast device MACHINE DETAILS Operating hours: estimated approx. 25,000 - 30,000 h EQUIPMENT Bar feeder FMB Turbo 5-42/3200C Kdjdpexrcpvefx Ahvei Documentation High-pressure coolant pump Workpiece removal unit Various collets Central lubrication system Ejector for workpieces with through-hole

Condition: good (used), Year of construction: 2016, The machine can be inspected at our premises in Immendingen after consultation. Included is the original chip conveyor and a bar feeder from FMB 2-20 turbo Incl. Kraft and Bauer fire extinguishing system Kedpfx Ahou Rmy Revsdi

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 14974, Tornos MultiSwiss 6x16  CNC Multi-Spindle Screw Machine Mfd. 2019 6 Motorspindles  5,5 kW max. speed 8’000 RPM Kdedpfx Asv S H Uyehvoi Spindle capacity 16 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3003) contact us for more details

Condition: excellent (used), Traub TNL12 CNC Swiss 12mm Capacity Production hours: 25596 hr. Kraft & Bauer Fire Suppression System Paper filter: Kompatkt Band Filter Configured as pictured (more photos to follow) Kdodpfx Ahjw R E Adovji Put into production in 2009 (originally show model) 12-ft FMB Bar Feed Mist Collector Chip Conveyor “2 machines available”

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Power on: 64,668 hrs Standard tornos bar feed (5ft) 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). Kdsdpfewa D Tujx Ahvoi 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3001) contact us for more details

Condition: used, Year of construction: 2014, functionality: fully functional, Cnc FANUC Series 31i – MODEL B Max. diam. workable from bar mm 51 Max. workable length mm 230 MAIN SPINDLE Max. rotation speed rpm 5000 ASA spindle nose 5" Spindle hole mm 59.5 Kdsdpfewari Rjx Ahvoi Internal diameter of bearings mm 90 Motor power kW 15 COUNTER-HEAD Max. rotation speed rpm 5000 ASA spindle nose 5" Spindle hole mm 55 Useful through hole mm 45 Internal diameter of bearings mm 90 Motor power kW 11 UPPER LEFT TURRET 1 UPPER RIGHT TURRET 2 LOWER TURRET 3 Number of positions 12 Rotation speed rpm 4,000 Motor power Kw 3.7 Rotation time (1 pos) sec 0.15 Max. stroke Y axis mm 90(-40/+50) COOLANT Tank capacity l 450 Total power of electric pumps kW 4.8 DIMENSIONS - WEIGHT Overall dimensions with chip evacuator mm 5033 x 2100 x 2458 h Weight with conveyor kg 8200

Condition: ready for operation (used), Year of construction: 1998, operating hours: 76,296 h, functionality: fully functional, machine/vehicle number: 330_030901, turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, controller model: CNC Fanuc 18i Tb, TECHNICAL DETAILS Machining diameter: max. 32 mm Maximum workpiece length: 125 mm Spindle travel: 310 mm Spindle speeds: 350 – 7,000 rpm C-axis: 1° Number of axes: 7 Drilling capacity with fixed tool diameter: 13 mm Drilling capacity with rotating tool diameter: 8 mm Thread tapping: M12 (with driven tool up to M6) Milling capacity: 10 mm MACHINE DETAILS Control unit: CNC Fanuc 18i Tb Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,512 x 1,700 mm Machine weight: 2,900 kg Bar feeder dimensions (L x W x H): 4,500 x 1,000 x 1,800 mm Bar feeder weight: approx. 1,800 kg Peripheral & accessory dimensions: approx. 1,900 x 700 x 800 mm Peripheral & accessory weight: approx. 200 kg Coolant used by the machine: Oil Operating hours: 76,296 h EQUIPMENT FMB TURBO 5-42 bar feeder (bar capacity 5-42 mm) MAYFRAN hinged belt conveyor Kraft und Bauer fire extinguishing system CO2 fire extinguishing cylinder (10 kg) Operating and maintenance manual Operating tools Kdjdoxp Ngvjpfx Ahvsi

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 Kjdsxp Ngcopfx Ahvjdi MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Main spindle C-axis: 0.001 degrees Max. sub spindle speed: 10,000 rpm Sub spindle C-axis: 0.001 degrees Tool capacity: 18 tools Number of axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor Kdsdpexp Nd Ujfx Ahvji FMB Turbo 3-26 bar feeder

Condition: good (used), Year of construction: 2008, F2 Series 4-station system: 4 tools engaged simultaneously 15 axes System 1: 5 tool holders 12 x 12 mm System 2: 8 driven tools (turret system 4) System 3: 16 tools (up to 16 driven) System 4: 8 driven tools (turret system 4) C-axis on main spindle + 5° mechanical indexing C-axis on sub spindle + 5° mechanical indexing up to 37 tools (32 driven) Bar feeder FMB turbo 5-42, 3200 Kodpfx Ahjw Iny Tovedi

Condition: good (used), Year of construction: 2007, 3-part system: 3 tools engaged simultaneously 12 axes 4-way cross machining Kdodpfsw In Anjx Ahvji up to 35 tools (26 driven) System 1: 6 turning tool holders 12 x 12 mm or 5 x 16 x 16 mm, 4 driven cross tools System 2: Y2-axis at the rear (3 fixed + 6 driven tools) System 3: 2 x 8-station turret with up to 16 driven tools C-axis on main spindle + 5° mechanical indexing C-axis on subspindle + 5° mechanical indexing C-axis on turret + freely programmable angle setting Bar feeder FMB turbo 5-42, 3200

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1212/0058, turning length: 200 mm, spindle speed (max.): 12,000 rpm, bar diameter (max.): 12 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 21, TECHNICAL DETAILS Maximum bar diameter: 12 mm Maximum machining length: 200 mm Axes: 7 linear axes + C axes for main and sub-spindle Main Spindle Spindle bore: 14 mm Motor power: 2.2 kW Speed range: 200 – 12,000 rpm Indexing: C axis, full-C (0.001°) Front machining maximum drilling diameter: 6 mm Maximum thread: M6 Sub-Spindle Maximum clamping diameter: 12 mm Part length (back side): 125 mm Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed range: 250 – 6,000 rpm Gang Tool Holder Maximum drilling diameter: 5 mm Maximum thread: M4 Maximum speed: 200 – 8,000 rpm Turret Maximum drilling diameter: 5 mm Maximum thread: M5 Maximum speed: 200 – 6,500 rpm Maximum thread: M5 Maximum speed: 8,000 rpm Tool Stations Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back working tools: 3 positions Tool Holders Turning tool: 10 × 10 mm Drill sleeves: diameter 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min Kdjdpfxexxlvrs Ahvei MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.5 m × 1.25 m × 1.7 m Weight: 2,500 kg Power Consumption (Rated): 6 kVA EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1216/0166, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 21, Equipment: chip conveyor, TECHNICAL DETAILS Max. Bar Diameter: 16 mm Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Spindle bore (main spindle): 18 mm Main spindle motor power: 3.7 kW Main spindle speed range: 10,000 rpm Main spindle indexing: C-axis, Full-C (0.001°) Max. drilling diameter (main spindle): 10 mm Max. thread size (main spindle): M8 / M6 Sub Spindle Max. clamping diameter (sub spindle): 16 mm Workpiece length (sub spindle): 125 mm Max. drilling diameter (sub spindle): 8 mm Max. thread size (back side): M6 Sub spindle speed range: 250 – 6,000 rpm (Full C-axis) Gang Tool Carrier Max. drilling diameter: 4.8 mm Max. thread size: M4 Max. speed: 200 – 8,000 rpm Turret Max. drilling diameter: 4.8 mm Max. thread size: M5 Max. speed: 200 – 6,500 / 8,000 rpm Driven Tools on the Back Side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: up to 8,000 rpm Kdedpjxxlryefx Ahvji Tools Total tool capacity: 21 positions Gang slide: 8 positions Turret: 10 positions Back side tools: 3 positions Turning tool shank: 10 × 10 mm Drill sleeve shank diameter: 19.05 mm Rapid traverse X/Z/Y: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power Consumption (Rated): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor Parts catcher Fire extinguishing system

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M216/0316, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, clamping diameter: 16 mm, counter spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Motor power: 3.7 kW Speed range: 10,000 rpm Indexing: 0.001° full C-axis Max. drilling diameter, frontal machining: 10 mm Max. thread size, frontal machining: M8 / M6 Sub Spindle Max. clamping diameter: 16 mm Workpiece length: 125 mm Max. drilling diameter: 8 mm Max. thread size, rear side: M6 Speed range: 250 – 6,000 rpm Gang Tool Holder (upper) Max. drilling diameter: 4.8 mm Max. thread size: M4 Speed: 200 – 8,000 rpm Turret, driven tools: Max. drilling diameter: 4.8 mm Max. thread size: M5 Speed: 200 – 6,500 / 8,000 rpm Driven Tools, rear side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: 8,000 rpm Tools Tool stations: 21 Gang slide: 8 positions Turret: 10 positions Rear side tools: 3 positions Tool Holders Turning tool shank: 10 × 10 mm Drill sleeve diameter: 19.05 mm Rapid Traverse Rapid traverse X/Y/Z: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Kdjdpfx Asxxll Tohvoi Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power consumption (nominal): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor belt Parts catcher Fire extinguishing system

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Max. frontal thread cutting: M12 Tool capacity: 30 tools Number of axes: 7 MACHINE DETAILS Control: Mitsubishi Meldas Kedpfxjxxlkpe Ahvjdi Connected load: 10 kW Dimensions & Weight Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders

Year of construction: 2006, condition: excellent (used), STAR ECAS 32 T CNC automatic lathe - Very good condition - Many accessories available - Detailed photo gallery included in PDF catalog TECHNICAL DATA Max. Machining Diameter: 32 mm Kedjl R Ix Sspfx Ahvodi Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Kdodpfx Aswg Takohvji Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Kdsdpfx Ahewi Ty Ajvji Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) Kdsdpfxst E Dbys Ahvji FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2005, CITIZEN K12 CNC lathe TECHNICAL DATA Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extension length: 80 mm Kdjdpfsvrz H Rox Ahvoi Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15000 rpm Max. machining diameter of the counter spindle: 12 mm Max. machining length of the counter spindle: 40 mm Max. drilling diameter for rear machining: 6 mm Max. thread diameter for rear machining: M5 Spindle speed, counter spindle: 10000 rpm Tool attachment, number of tools: 8 Speed of the driven tools: 6000 rpm X1 axis: 122 mm Z1 axis: 200 mm Z2 axis: 150 mm Weight: 1950 kg SCOPE OF OFFER Among other things: (list not exhaustive) Citizen K12 CNC lathe Chip tray Transformer Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: good (used), Year of construction: 1996, functionality: fully functional, STAR SH-12 CNC long lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Speed: 400 – 10,000 rpm Kdsdpfovllmhox Ahvei Spindle power: 1.5 kW Number of tools: 5 Number of tools in the device: 3 Dimensions of the machine: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF OFFER Among other things: (list not exhaustive) STAR SH-12 CNC lathe Bar loader Coolant pump Transformer Exact scope of offer according to photo gallery We accept no liability for the accuracy, completeness and timeliness of the information.