Dimensions: 18m x 1m (basic dimensions table guide rails)
2,4m x1,6m (basic dimensions portal stand middle)
G0ulgn7
3m x 2m (basic dimensions of hydraulic unit)
2,9m height of portal stand
Portal passage: 1030mm x 960mm
dimension clamping table: 8000mmx 970mm
Equipment:
- Hydraulically controlled table feed (infinitely variable)
- 2 supports horizontal
- 1 support vertical
- Renewed electrics June 2014 with change of control cabinet
Four side planer 4PM 180/4
- after the technical review
- very good condition
- DTR documentation
- year of production 2006
Bkr099xzo2
TECHNICAL PARAMETERS:
working width 180 mm
working height 120 mm
spindle diameter 40 mm
5.5 kW lower horizontal spindle
right and left 7.5 kW vertical spindle
upper spindle 5.5 kW
1.1 kW feed motor
spindle speed 6000 RPM
the top four steel pull rollers
one top rubber pull roller
two kinds of feed speed 6 and 12
length of the feeding table 170 cm
diameter of...
Four-sided planer TOS Svitavy Master FWH 18
Width of workpiece max / min - 180/15 mm
Height of workpiece max / min - 120/6 mm
Feed speed - 8/16 m / min-1
Spindle speed - 6000 min-1
Tool diameter - 123 mm
Diameter of the shaft - 40 mm
Insertion table length - 2500 mm
Number of working spindles - 4
Diameter of the input discs - 120 mm
Yt7xug
Min. Length of the machined part - 300 mmEngines:
Lower 5.5 kW
Right 5.5 kW
Left 5.5 kW
Above 5.5 kWCurrent 38-40 Amp, 400VDimensions 3050 * 1250 * 1350mm (L...
surface planer make SAC type FS 430 HP 4
Masch.# 102g.05.84 Year of construction 1984
Technical data:
dressing width 430 mm
Knife of the four-blade shaft 430 x 35 x 3.0 mm
max. fold depth 20 mm
Table length 2900 mm
table length 1550 mm
delivery table length 1310 mm
Table width 430 mm
Cgclrtee
Diameter of the knife shaft 120 mm
Blade shaft speed 4500 rpm.
Table height 800 mm
Dressing fence 1300 x 160 mm
Stop inclination 0 - 45
Drive power 4,0 PS
Weight approx. 745 kg
Outer dimensions approx. 2900...
Technical characteristics
Working width: max 230 mm, min 15 mm
Bzhhrnxq
• Working height: max 150 mm, min 10 mm
• 2000 mm chrome feed table
• Drive shaft drive shaft 4 kw, speed 6 to 24 m / min
• Chromed toothed feed rollers up to the 1st spindle, rubber after; pneumatic pressure and rise / fall
• Electric height adjustment
• Mechanical display on spindles, except for dressing
• Power supply 400 V, 50 Hz, emergency stop, switches
Composition:
1. Horizontal lower spindle
- 7.5 Kw...
TECHNICAL DATA
- max width of the workpiece 200mm
- max height of the workpiece 150mm
- number of spindles 4
1) horizontal lower 200mm 5.5kW
2) vertical right 150mm 4kW
3) vertical left 150mm 4kW
4) horizontal upper 200mm 5.5kW
- all heads adjustable up / down, right left
- diameter of the spindles 40mm
in advance:
- introducing pulling rollers, toothed 6 pcs, including 2 double
- 1 rubber pulling shaft
from down:
- roller introducing toothed, pulling, torsion in the lower table top
- side clam...
6 shafts: bottom/right/left/top/bottom/right
planing width max. 140 mm
planing height max. 120 mm
Bxamhzp9lu
Chain feed
Spring pressure of the feed rollers
4-SIDE PLANER MOULDING MACHINE WEINIG UNIMAT 17 A
Technical specifications:
Working width: max 180 mm
Working height: 120mm
Motor power per spindle: 4 KW
Spindle speed: 6000 rpm
Diameter of the spindle: 40 mm
Smallest tool diameter: 100mm
Max. tool diameter: 160mm
Max. diameter of the vertical spindles : 180mm
Max. tool diameter of the 2nd right spindle: 195mm
Max. tool diameter of the upper spindle: 200mm
Max. tool diameter of the lower spindle: 180mm
Feed speed variable: 6 - 18 m / min
Spindle...
Four-sided planer
Weinig :Unimat 23 E (Blue), serial number :023-2441
Connection diameter extraction 140 &: 200mm
Shaving spindle bottom, top and universal: 240mm
Left and right spindle: 170mm
Workpiece width min/max 20/230
Spindle diameter 40mm
1st spindle, bottom: 11kW
2nd &: 3rd spindle, right &: left: 11kW
4th spindle, right: 5.5kW
5th spindle, top: 11kW
Bynrjcw73m
6th spindle, bottom: 7.5kW
7th spindle, universal: 7.5kW
Motor feeder :5.5kW
4-shaft moulder
Bfrpzmxxbm
finished piece max 260 x 180 mm
4 spindles
possibility to profile 45 mm
Friulmac FN3 1300
Gujtzxql
- working length from 26cm to 130cm
- width up to 16cm
- 5.5kW saw motors
- smooth regulation of the feeding speed
A very nice copy
working width 8 - 180 mm
max. working height 5 - 120 mm
feed speed 8 m / min.
motor horizontal spindles 2 x 4,0 kW
motor vertical spindles 1 x 5,5 kW
spindle speed 6000 UpM
spindle diameter 40 mm
infeed table length 2000 mm
QTS system (autom. hight and width positioning)
Incl. 4 pcs LEITZ Centro-fix tools with new knives
Incl. dust collector hood
weight approx. 1200 kg
machine dimensions approx. L x W x H = 3000 x 1000 x 1450 mm
Advise used machines:
• Technical data without obligation...
Upper and Lower Hydraulic Advancement Group.
Electric command board.
Working range 330 mm
Bdudwmfh89
Feed speed 0/100 m / min approx.
Maximum height 130 mm
Maximum width 330 mm
Provisional specification.....
220 X 120mm capacity
2m infeed table
4 spindles
Bvqcuoqtro
Bottom x 5.5kw
Right }
Left } Single x 11kw for right / left spindles
Top x 11kw
Chain drive / spring pressures
6000 rpm x 40mm dia spindles
Feed speeds 6 - 12m/min
Safety cover
Four-sided planer Casolin Mega 230/5
Width 20-230 mmHeight 7-120mmSpeed 5-25 m/minSpindle diameter 40 mmWorking length horizontal shafts 252 mmWorking length vertical shafts 150 mmTable length before planer 2500 mmFeed roller diameter 140 mm
Plwdj
5 axes1st: Under 5.5kW2nd/3rd: Right/Left 11kW4th: Above 7.5kW5th: Under 7.5kW
MEC Planer heads with Centrolock blades
Weinig 6-head
uh, spindles:
down - left - right - up - down - left
spindle number 6
H2mb3b2
width of the planer ca. 160 mm
Planer height ca. 120 mm
table length ca. 2000 mm
table greasing
feed rate
from 6 to 18 m/min.
- max. planing width 220mm
- max. planing height 120mm
- diameter of the spindles 40mm
- smooth feed adjustment 5-25m / min.
- electrically adjustable planing height
- electrically adjustable planing width
- 5 universal head
Order of heads:
1 Lower 7.5kW
2 Right 11kW motor shared with left head
3 Left as above
4 Mountain 7.5kW
Jwxuki
5 Universal 5.5kW
heavy duty planer with turning ring and height adjustable indeed and outfield roller tables
working width 30 - 2100 mm
working height ca. 13 - 300 mm
H82q7gyf
2 top and 2 bottom horizontal planing shafts, inclined,
the left 2 shafts with 4 knifes, the right 2 shafts with 6 knifes
horizontal spindle bottom 2 x 18,5 kW
horizontal spindle top 2 x 22 kW
vertical spindle right 7,5 kW
vertical spindle left 7,5 kW
motor table height adjustment 3,0 kW
feed speed variabel up to approx. 4 - 24 m/ min...
4 - side Thicknessing and planing machine with
side heads.
Max working width 760 mm
Max working height 200 mm
Mvbmwc
Feeding speed up to 23 m/min
WEINIG UNIMAT SUPER 4 planer
- machine in stock
- after the technical review
- German production
- year of production 2006
- specialized machine for planing wood for gluing
TECHNICAL SPECIFICATIONS:
- planing width 150 mm
- planing height 50 mm
- diameter of the spindles 40 mm
- equipped with tools
- the first lower head 11 kW 6000 U / min
- second upper head 22 kW 7000 U / min
- the third lower head 5.5 kW 6000 U / min
- 2.2 kW feed motor
- adjustable feed on the inverter
- feed on cardan sha...
Four-sided planer
Futura Rotomat 220-5Maximum planing width 220mmMax planing height 120mmInput table length 2500mm
Clgnsdjk
5 axis machine:belowRightLeftaboveUniversal
All engines 5.5kW (7.5HP)
Transport dimensions: 4400x1600x1500mm (LxWxH), 1800kg
Lama machine
G0syft7
Working width 300 mm
Working height 250 mm
Working height 4-side 200 mm
Number of spindles 4
Spindle configuration b-t-r+l
Spindle diameter 60-60-50-50 mm
Jointer for spindle 1-2
Motor power 37-45-11-11 kW
Working width adjustments Digital adjustments
Bsxlasfibi
Working height adjustments Digital adjustments
Feed speed 20-200 m/min
Feed motor 15 kW
Feed-system Cardan
Driven bed rollers 3
Infeed rollers 3
Outfeed rollers 1
Tools horizontal 200x300x60 Z12
Constant table height ca. 900 mm
Chip remo...
- Machine frame
1 Monobloc base frame made of heavy steel.
- The machine frame is made of high-grade steel and is very heavily constructed by, among other things, the application of various sketch plates and reinforcement ribs.
2 The infeed table made of special ground steel length 2500 mm.
- Input table of steel ground length 2500 mm.
- Worktable Herdox HB 400
- Grooved V-belts on all spindles
- Separate motors for each spindle
- Electromotive high/low adjustment incl. feed rollers and pressure...
4 sides Guiliet cross section Max. 180/120 mmElectronic height adjustment via scale 4 shafts4 motors can be switched on via sequential switchPlaner heads (blade can be clamped with Allen key) and can be easily adjusted to different masses
Ba8qdgrck
Four-sided planer
Sicar SCP 18 FMaximum planing width 180mmMax planing height 120mmInput table length 2500mm
5 axis machine:Under 5.5HPRight 5.5HPLeft 7.5HPAbove 7.5HPUniversal 5.5HP
Byi8807yfn
Transport dimensions: 4400x1800x1600mm (LxWxH), 2500kg
Dividing head
with 250 he Röhm four-jaw Chuck
3jmnoc99
Spindle bore 60 mm
Space requirements: L. 430 x B. H 200 x. 200 mm
Year of manufacture: 2005
sliding carriage: 3200 mm
engine: 5,5 kW with brake
Byw7coqkck
scoring unit
electr. saw blade adjustment
control panel at eye level
cutting width right of saw blade 1250 mm m. digital display
Ø saw blade max. 450 mm
cutting height max. 150 mm
CNC milling machine make RECKERMANN type Primo
machine. # 1041 TR 600 Year of construction 12/86
technical data:
table size 800 x 300 mm
longitudinal travel = X 600 mm
cross travel = Y 300 mm
Mr70io
vertical travel = Z 250 mm
max. workpiece weight 500 kg
throat depth 150 - 350 mm
Spindle mounting ISA 40
Stepless spindle speeds 40 - 2000 rpm.
feeds all directions 10 - 6000 mm/min
rapid traverse 12 mm/min
Drive power 4 kW
weight 1,35 t
with
- path control HEIDENHAIN TNC 151/ 4 axes
- aut. tools
us...
CNC machining centre
FORMAT-4 PROFIT H08 21.31
Working area X 3090
Working area Y 2100
Working area Z 110
Main motor 10 kW HSK63
Vertical drilling spindles 8
Gai2909f
Linear storage 15 places
Becker vacuum pumps 250 mbar
Automatic central lubrication
Catalog number 6292
TECHNICAL DATA
- 30mm spindle diameter
- working height of the spindle 130mm
- interchangeable spindle
- spindle locking
- adjustable up / down
- original cast iron guide with full adjustment
- 4 types of rotation speeds + right / left 3000, 4500, 6000, 9000 rpm
- dimensions of the top 2030x900mm
- steady retractable from the top
- cast iron top
- 6.2kW engine
- electric brake
- diameter of the extraction port 110mm, 140mm
- dimensions length / width / height 2030x1170x1360m...
Used machine
Single sided edge banding machine
Bbyjv3se3
Automatic unit adjustment from both sides of the machine
Workpiece height 8 - 60 mm
edge thickness 0,4 - 8,0 mm
Joining milling unit
Gluing unit with quick-change system for fast colour and PU glue changes
2 axis - positioning controlled multifunctional unit for flush, chamfer and radius milling
Corner copying unit
Controlled radius scraper x-motion-plus
Surface scraper with multiple touch rollers
Availability: short term
Location: Soling...
Chain hoist
Load capacity 4 to.
Cc7fuaba
lifting height 4 meters
with trolley
manually operated
1 ST 600-05-10001 Profit 3 - Work Station with 4-axis(C-axis)(without tools.)
The Profit 3 work station is constructed
from thick walls incorporating formed tubing
that is electrically welded and then tension
free fixed. The ribbed construction of the
work station makes it highly stable.
1 ST 600-05-10202 Central Lubrication System:
A manually operated lubrication pump distributes
grease to all the bearing and linear
guidance system.
1 ST 600-05-10201 Guidance System
The X axis is driven by rack...
Curves switched off rotary Fabr. EXPERT type E 19/0030/4
Masch. # 4806 with 4 stations, advantage: the 4 stations are
precise and soft. The classification cannot be changed. You can run denTisch while all funds, but he keeps
always on the 4 stops short at that.
Technical data:
Rotary plate diameter 1350 mm
Table height 820 mm
Internal hole 90 mm
Max load 1 t
Outer diameter 1500 mm
with
V9vkcd0ls
-ball bearing slewing ring
-Index drive
-without motor
very little used, in very good condition so ...
CNC machining centre
FORMAT-4 PROFIT 2
field X3300 Y1280 Z250
spindle 11 kW HSK 63
vertical drilling 18
horizontal drilling 6
Bymf9i2ndc
saw 2
linear magazine 12
vacuum pump 100 mbar
automatic central lubrication
Cantilever rack used: screw system in hot-dip galvanised design
Scope of delivery:
4 shelf uprights height 2600 mm with foot section 1000 mm
12 cantilever arms with 1000 mm depth, standard
6 longitudinal bracings for 1300 mm centre distance
2 diagonal braces for 1300 mm centre distance
Incl. fastening material (without floor anchors)
(Offer would also be available in larger quantities: 108 uprights in stock)
Bb2felr
Sturdy steel construction made of IPE profiles
Load capacity per upright 1800 kg...
*Business dissolution*
Edge banding machine G 500 with 8mm package
from 2 man operation, approx. 1,5 years run, very good condition - almost new
workpiece height: 8-60 mm,
edge thickness: 0,4-5 (23x8)mm
new price approx. €16.500,-.
Impact shears,
flush saws,
flush and radius milling R 2 mm,
Engine power: 7.5 HP/HP (5.5 kW)
Bg0gbwejxb
Capacity: 80 m/min
Po382
Planer feed table, tested. At speeds up to 80 m / min.
Cutting length 3200 mm, control via 10" colour screen with touch function. Saw blade Ø of 550 mm, cutting height 202 mm at 90°.
At 45° cutting height 140 mm.
Motor 3x 400 V 50 Hz 7.35 kW S6 Star-Delta-Start
Scoring saw unit "Automatic" with automatic lifting and lowering of the scoring saw blade, table extension up to 1620 mm
"Quick-Lock" - quick change system for main circular saw blade
Position controlled rip fence with digital display in the control panel at eye level, cutting width 1250 mm
E...
pillar drilling machine make GILLARDON type R 30 VE
Machine # 0123213 Year of construction Dec./1976
Special machine for machining flanges or rings on the outer rim
technical data:
Drilling capacity 40 / 50 mm
tapping capacity M 42 / M 60
spindle admission MK 4
spindle stroke 240 mm
Spindle speed 60 - 1600 rpm.
Column diameter 160 mm
height adjustment 680 mm
drive power 1,1 / 1,6 kW
with
- pneumatic additional spindle sleeve stroke
- motorized rotating vertical chuck positioned under the spindle...
Panel Saw Mayer(Format4 Felder) PS9Z 3200/3200
• Cutting lenght 3200mm
• Cutting depth 3200mm
• 13 kW Main saw blade motor
• 1,1 kW scoring unit motor
• Air cushion table
• Saw cartrige feed speed 1-100 (130 return)m/min
• Pusher 80m/min
• 6 бр clamps
Bfqxyp8eay
• Label Printer
Machine is still in use. Availability upon request.
Cantilever rack used: screw system in hot-dip galvanised design
Scope of delivery:
4 shelf uprights height 4200 mm with foot section 1200 mm
12 cantilever arms with 1200 mm depth, standard
6 longitudinal bracings for 1300 mm centre distance
2 diagonal braces for 1300 mm centre distance
Incl. fastening material (without floor anchors)
Stmez8
(Offer would also be available in larger quantities: 159 uprights in stock)
Sturdy steel construction made of IPE profiles
Load capacity per upright 2250 kg
...
- 4 column truck / bus lift,
- brand: Koni; 4-column: yes
- capacity: 14000 kg;
- lifting height: 16350 mm; path width: 700 mm; electric
connection: 400 V; total dimension L: 8000 mm; total dimension W:
4000 mm; total dimension H: 2400 mm; description: width between
the columns 335cm; length lanes 800cm.;
Lift is already dismantled, ready to load on truck.
3gtm0cqu
We can organize it transport inside EU.
FORMAT-4 KAPPA 450
3200 mm carriage
cutting width on parallel fence with digital readout
undercutter is
3 types of sawing speed
electrically raised and tilted with digital readout
motor 5.5 kW
saw blade diameter 250-450 mm
Bxwnln72vt
inclination of the saw blade 90°- 45°
undercutter 125 mm
