WEINIG UNIMAT SUPER 4 planer

WEINIG UNIMAT SUPER 4

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Dedpfx Acsyatffe Nski Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: good (used), Year of construction: 2007, machine/vehicle number: 94323, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, total height: 2,400 mm, total length: 4,400 mm, total width: 2,800 mm, overall weight: 3,130 kg, I will sell a MACHINING CENTER IN CONTINUOUS OPERATION CNC machining center Biesse ROVER 3.03 functional to view in Wadowice Feed X 3060 mm Feed Y 1260 mm Feed Z 150 mm Dkedpfx Aowpthtec Nei Control type CNC XP 600

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm Dksdpfx Acew E I Rue Nji - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min Dsdpsqprk Tsfx Ac Noki - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Dksdpfx Aoq Dzkuoc Nji Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10 Djdecggy Sepfx Ac Njki

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Dksdpfx Acjizkhvj Noi Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: new, Year of construction: 2026, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Technical Specifications LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Dkedpfxow H Rdms Ac Nsi Wrenches, grease gun, maintenance tools CE-compliant safety guards

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Dedpsb Auu Rsfx Ac Njki Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Condition: new, Technical data: Dedpfxsv S Uz Is Ac Nski Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm