Used 4 Parallels for sale (30,694)

Condition: used, Year of construction: 2011, Technical details: Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW type of fuel: (Erd) Gas Number of working hours: 87021 h weight: ca. 2300 kg dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) soundproofed with electric cabinet Engine: Klolhcdju Nvp Sjw Iop MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. with exhaust gas top *

Condition: used, Year of construction: 2023, Length of sliding table: 3.200 mm Cutting width: 1.250 mm Cutting height max: 155 mm Cutting height with scoring saw: 130 Saw blade diameter max: 450 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Main motor power: 7,3 kW Rotation speed steps: 3 Rotation speed adjustable electrically: Yes Scoring aggregate: Yes Scoring saw height adjustment: electro-motive Scoring saw width adjustment: manually Scoring saw cutting width: Spacer discs Controlled axes: Yes Number of controlled axes: 3 Motorised rip fence: Yes Winkelanschlag, Digitalanzeige: Length Mitre difference measure adjustment: Yes FELDER X-Roll sliding table: Yes FELDER Easy-Glide: Yes Control: FORMAT 4 X-MOTION Declaration of CE-conformity: Yes Klolhcdwev R Ixqs Iop Conformity marking: CE mark, UKCA-Zeichen Total connection: 7,35 kW Weight: 1.200 kg Space requirement Length: 3,35 m Space requirement Width: 2,1 m Space requirement Height: 1,8 m

Condition: excellent (used), CATALOGUE NUMBER 7595 Technical data: - loading hopper inlet 1400x1400mm - outlet for shredded wood fi 160mm - working width of the rotor 600mm - main engine 18.5kW Kslhcev R E Amsdw Islp - pump engine 0.75kW - number of knives 14pcs - knife dimensions 40x40mm - V-Rotor - sieve 10mm - pressure drawer - electric auto reverse - dimensions l/w/h 1810x1210x2120mm - weight 1220kg ADVANTAGES - German production - V-Rotor - DTR documentation - pressure drawer - auto reverse - used chipper, very good condition Net price: PLN 47,900 Net price: PLN 11,270 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: used, FORMAT 4 profil 45 M x-motion table router -used- swivels to the rear, electric height adjustment, electric tilt, Height and swivel adjustment with positioning control, Positioning control for milling fence, table extension, extendable support, finely adjustable milling fence, right/left rotation, incl. arc milling fence, Swivel device for feed, integral fence, Year of manufacture 2022 ----- Technical data ----- Swivel range: +5 -45 °, Table size: 2,500 mm, Spindle diameter: 30 mm, Useful length of milling spindle: 140 mm, Kolhsu R Tcxocdw Ijlp max. milling cutter diameter: 250 mm, max. retractable cutter diameter: 320 mm, Speeds: 3,500/4,500/6,000/8,000/10,000 rpm, Motor: 7.35 kW, Extraction nozzle Ø: 140 mm, Suction nozzle Ø bottom: 80 mm, weight: 730 kg

Condition: like new (used), Technical data for the wide-span shelving system: Racking system: SSI Schäfer Type: WR 600 Technical data for installation: Number of rack rows: 01 pcs. Number of levels plus floor level: 04 pcs. Klolsqhkh Aehcdw Isp The scope of delivery includes: 02x wide-span shelving uprights, second choice (new) Material color: sendzimir galvanized Upright profile: 60 x 31 x 1 mm Incl. cross and diagonal braces, 01x swivel castor / stop castor | 01x fixed castor Castor Ø: 100 mm (bolted framework) 2,195 mm high 1,050 mm deep 08x Wide-span shelving traverse, second choice (new) Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: ASM50-CES80|40|1.5 Version: Stepped crossbar Bracket: 5 HK (hooks) Clear width: 2,400 mm 04x chipboard II. Choice (new) Thickness: 22 mm Dimensions: 2,380 x 960 mm Design: all-round butt joint 16x locking pins, new Design: completely galvanized To secure the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Klslotq Nlrjhcdw Ijp Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 200.12.010.13, year of last overhaul: 2024, Machine can be collected from April. Machine is still in operation and can be inspected during operation. Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized positioning-controlled pressure beam chain feed with 12m/min feed speed roller support plate d=760mm 2 motorized joint trimming unit Edge feed for roll and strip material 0.4 - 5mm Kjlhcstvfihodw Ijlp 2 replacement gluing units for EVA 1 replacement gluing unit for PU Motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit 2 motorized multifunctional units for radius, flush and chamfer trimming Corner processing unit Radius scraper 2 motorized polishing unit (buffing) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit

Condition: used, Year of construction: 2020, Edgeband thickness max: 6 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Feedrate max: 10 m/min Electromotoric height adjustment: Yes Glue system granulate: glue pot below feeding chain Quick-change glue pot: Yes Suitable for PUR glue: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Suitable for nesting: Flat scraper, Fräsaggregat Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Machine length: 4.412 mm Kslsv Rpvqohcdw Iolp Control: FORMAT 4 SMARTOUCH X-MOTION PLUS Conformity marking: CE mark Total connection: 15 kW Space requirement Length: 4,42 m Space requirement Width: 1,51 m Space requirement Height: 1,97 m

Condition: excellent (used), CATALOGUE NUMBER 7596 Kljlhev R Ewdscdw Iop Technical data: - loading hopper inlet 1030x1730mm - outlet for shredded wood fi 160mm - working width of the rotor 600mm - main engine 18.5kW - pump engine 0.75kW - number of knives 14pcs - knife dimensions 30x30mm - sieve 30mm, 25mm - pressure drawer - electric auto reverse - diameter of the exhaust port 160mm - dimensions l/w/h 2200x1260x1450mm - weight 960kg ADVANTAGES - German production - original DTR documentation - pressure drawer - auto reverse - used chipper, very good condition Net price: PLN 45,900 Price net: 10800 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: used, Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, swivel control panel, program memory, automatic pressure bridge adjustment, Feed by means of transport chain, extendable workpiece support, diamond milling cutter in synchronized and counter-rotation, bottom-mounted glue pot, Changing device for glue tray, PUR adhesives can be used, GLUEBOX, pressure unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be tilted pneumatically, Flush / radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, Corner copying unit with diamond-coated cutter, Radius scraper, Radius scraper with motorized positioning control surface scraper, insert-controlled surface scraper, infeed stop, Release agent spraying device, Lubricant spraying device, Cleaning agent spraying device, Year of manufacture 2022 ----- Technical data ----- Edge thickness of rolls: 0.4 - 3 mm, Edge thickness of strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. Workpiece length: 140 mm, feed speed: 10 m/min, Screen diagonal: 15 inch, Kljlhou R S Nwecdw Iop Dimensions of jointing cutter: D 80 x 64 mm, Power of jointing cutter: 1.1 kW, Cross-cut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Kslhcsrrh T Asdw Ijlp Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2016, Condition: used, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Kjlhcordkf Ajdw Iolp Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: used, Year of construction: 2013, Functionality: fully functional, I will sell a very good, little used, because it only worked as a second, spare machine, the Format 4 Perfect 710 E-Motion edge bander in full equipment. This is a well-reputed edge bander, strong, heavy construction. I have had the machine since 2013. Bought new. It worked without failure on 1 shift. It was regularly serviced by Felder - it is well-maintained. I believe it is in very good condition and will serve the new buyer for a long time. Feed speed 12m/min. Minimum element length 140mm. Minimum element width 60mm. Feeding of edges from a roll and wooden edgings with a width of 12 to 64 mm. Guillotine shears for edges from a roll with a thickness of 0.4 to 3 mm. Feed ruler 700mm long. Pre-milling. Touch screen. Glue container. Selling due to replacement with a new machine. Net price Klolhcdwev Ivi Sj Isp

Condition: used, Year of construction: 2023, Edgeband thickness max: 3 mm Kljlhcsv Rd Rcodw Isp Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Feedrate max: 10 m/min Electromotoric height adjustment: Yes Glue system granulate: glue pot below feeding chain Quick-change glue pot: Yes Suitable for PUR glue: Yes FORMAT 4 glueBox: Yes Spraying device: Yes Premilling unit: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Control: FORMAT 4 SMARTOUCH Conformity marking: CE mark, UKCA-Zeichen Total connection: 15 kW

Condition: excellent (used), CATALOG NUMBER 7597 Technical data: - max. main blade diameter 400mm - main blade adjustable up/down and at an angle (electric adjustment) - spindle diameter 30mm - large blade guard - max. cutting height for a 400mm blade (electric adjustment) 135mm - with a formatting carriage - carriage made of steel bars - cutting length on the carriage 3200mm - X-ROLL carriage guidance - switch in the formatting table - cutting width at the guide (digital position display) 1300mm - with a side carriage - ruler with two pawls + readers - with a scoring unit - max. scoring unit diameter 120mm - spindle diameter 20mm - scoring unit motor 1.1kW - main motor 5.5kW - emergency switch - 3 types of rotation speeds 3500, 4500, 5500 rpm - table top dimensions 900x700mm - table top dimensions with extension and widening 1400x1540mm - diameter of the exhaust port 80,120mm - dimensions length/width/height 3320x3650x1700mm - weight 731kg ADVANTAGES - 2 cutting width readers on the longitudinal ruler, auxiliary trolley - digital cutting width display at the guide - electric adjustment of the blade and the scoring saw up/down and at an angle - additional switches in the formatting table - with scoring saw - original documentation + CE - used saw, very good condition Klslhov R Eu Aocdw Ijp Net price: PLN 29,900 Net price: EUR 7,035 depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: good (used), Polar Mohr PW-4 ABV Pile turner with aeration and jogger Kslhcdev Erxkow Ijlp The device is ready to work. This is one of the most powerful models of turners on the market. The machine has an aeration system, jogging and a hydraulic lock from the head rotation. Side margin. Technical data: Format 1200 x 800 mm Stack height 1350 mm Load capacity 1200 kg Weight of the device 1600 kg Power supply 380 V Control from the desktop, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space.

Condition: excellent (used), Functionality: fully functional, The following item is for sale: - Our offer number: 4/130 - Liquid Chromatograph Liquid Chronograph - Manufacturer: Shimadzu - 3 pcs LC-10AT Liquid Chronograph (A+B) - Weight : 1 pc 12 kg - 1 pc CTO-10AS Column oven - Weight : 12 Kg - 1 pc SPD-M10A DAD-Detector - Weight : 10,5 Kg - 1 pc DGU-14 A Degasser - Weight : 7,5 Kg - 1 pc SCL-10A System Controller - Weight : 5,8 Kg - 1 pc SIL-10AD with lower part auto-injector - Weight : 27 KG - with 2 PC + monitor + keyboard and mouse - with complete documentation / operating instructions of the devices - optical condition according to photos - used - functional The devices come from a laboratory and work perfectly Shipment is either in approx. 3 parcels with DHL or with a forwarding agent on a pallet Kslhcdwsrvhypj Islp Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Bhsuijgfo20 Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods available.

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Original packaging Equipment and technical data: Circular saw unit swivels 90-45°, Saw blade D=250-450 mm, cutting height max. 155 mm, electric height adjustment Electric angle adjustment with digital display for height and angle Crosscut stop 3200mm swivels 90-45°, 2 stop jaws Ksljv E Szlehcdw Iolp Machine stand kappa 450, circular saw table made of gray cast iron Operating tools 3 speeds 3500/4500/5500 rpm, 50Hz Electric panel saw 3x400V 5.5kW (7.5PS) S6, SD Start, CE with brake Cutting width 1250mm Top guard cutting width 1250 mm, hood for 90° and hood for angle cuts height adjustable and made of can be swung away from the work area. Saw blade diameter 450mm, suction connection D-100 mm Parallel stop with digital display and automatic length compensation when the saw blade is swung, stop ruler length 1200 mm, can be swung away Format sliding table cutting length 2800mm anodized, trimming shoe (W-Alu/An-Gray) 10-year Felder guarantee on „X-Roll“, the Felder format table guide system! Extension 1250x650 mm X-Roll with movable support rail and digital angle display, cutting length 2800/3200 mm Location: Hochheim Availability: Immediately Sale on behalf of the customer

Condition: used, Year of construction: 2014, Working dimension X: 3.060 mm Kelhcjv Ip H Rjdw Iolp Working dimension Y: 1.260 mm Working dimension Z: 100 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: Aggregate interface FORMAT 4 5-MOTION: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Linear tool changer: Yes Mitfahrender Linearwechsler: Yes Pickup tool changer: Yes FORMAT 4 Chipping deflection plate: Yes Number of exchangeable units: 1 Vertical drilling spindles: 14 FORMAT 4 DH 20 6H 1S: Yes Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Pendulum machining: Yes Number of consoles: 6 Pneumatic pipe connectors: Yes Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Safety mat Interface for .dxf data: Yes Automatic central lubrication: Yes Pneumatic pipe connectors: Yes Control: PC control Handheld terminal: Yes Software: TPA ALBATROS, FORMAT 4 WOOD FLASH AV-LIZENZ Conformity marking: CE mark Total connection: 18 kW Space requirement Length: 6,5 m Space requirement Width: 4,5 m Space requirement Height: 2,4 m

Condition: used, CATALOGUE NUMBER 7583 Kjlhjv Iyt Uscdw Ielp TECHNICAL DATA - extraction capacity approx. 3300 m3/h - 2.2kW motor - 380V voltage - number of bags 2pcs - chip bag diameter 630mm - chip bag length 1150mm - hose connector 4x125mm - shipping dimensions L/W/H 1950x1100x1420mm - total dimensions L/W/H 1950x1100x2550mm - weight 100kg ADVANTAGES - Polish production - mobile machine - used, unpainted extractor - very good condition Net price: PLN 3300 Net price: EUR 780 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Functionality: fully functional, The following item is for sale: - Our offer number: 4/115 - Modicon Quantum Ethernet Network PLC Module - Manufacturer: Schneider - Type: 140NOE77100 - Weight: 500 g - optical condition according to photos - New with seal ( 1 box was only opened for photos ) - functional - Sales quantity per auction 1 pc ( 7 pcs available ) Kljlhoq Dpdyecdw Ijp - Shipping Germany-wide 8,90€ Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates it is not always possible to give exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. Jwt9nu If an item is opened or repaired/rebuilt by the buyer, any warranty claim expires. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: used, Year of construction: 2018, Working dimension X: 3.500 mm Working dimension Y: 950 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 5 Linear tool changer: Yes Pickup tool changer: Yes Vertical drilling spindles: 11 FORMAT 4 Drilling aggregate DH 17 6H 1S: Yes Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: enclosed cabin Workpiece length measurement: Yes Handheld terminal: Yes Klslhjv Iflcscdw Ijp Automatic lubrication: Yes Automatic central lubrication: Yes Control: PC control

Condition: used, Year of construction: 2012, Working dimension X: 3.740 mm Working dimension Y: 1.360 mm Working dimension Z: 130 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: Aggregate interface Tool clamping system: HSK-F63 Tool changer positions: 26 Number of exchangeable units: 1 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Lock recess milling aggregate: permanently attached Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Positioning aid: Yes Vacuum pump: Yes Capacity vacuum pump: 90 m³/h Safety device: Safety mat FORMAT 4 5-MOTION PLUS: Yes FORMAT 4 Chipping deflection plate: Yes FORMAT 4 DH 20 6H 1S: Yes Kelhcdsvw Salsw Ielp Crosshair laser: Yes Workpiece support aids: Yes Disc tool changer: Yes Pickup tool changer: Yes Control: PC control Software: FORMAT 4 WOOD FLASH Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 25 kW

Condition: used, Year of construction: 2017, Working dimension X: 3.000 mm Working dimension Y: 1.550 mm Working dimension Z: 250 mm Number of milling spindles: 1 Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Klslhcdov Ezk Now Isp Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 6 Pneumatic pipe connectors: an den Konsolen Vacuum pump: Yes Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic lubrication: Yes Control: PC control Software: FORMAT 4 WOOD FLASH, MICROSOFT WINDOWS 7 Total connection: 19 kW

Condition: used, Year of construction: 2010, Working width: 630 mm Working height max: 300 mm Number of knives: 4 Working height min: 3 mm Rotation speed: 4.600 rpm Table length: 1.100 mm Number of feed-out rollers: 1 Main motor power: 11 kW Feedrate max: 20 m/min Continuously variable feed: Yes Digital readout for thickness: Yes Segmented pressure bar: Yes Electromotoric height adjustment: with digital readout Cutter block: Barke/Brück Outfeed: Steel roller Klolhcjvvydpodw Ijp Control: FORMAT 4 POWER-DRIVE Conformity marking: CE mark Space requirement Height: 1,2 m