4 shaft shredder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
4-shaft shredder M07mv Inlet cross section approx. 1000 x 700 mm Drive 2 x 18.5 kW more
6
The engine was rebuilt in 2016 with a particularly low blade gap. It is suitable particularly for film recycling and similar applications. Due to the very high indentation effect, the machine can be used as well in the recycling of food scraps. -Power: 30 kW / approximately 5100 nm / 57 1/min -Cutting factory Assembly: 34 blade, 3 Zack, 18.5 mm, polished -Cutting factory opening: approx. 700 x 500 mm Mzr7cr8 -two sides with wear plates - scraper - motor with Thermistors -Weight approx. ... more
6
Einwellenschredder / pre-Shredder LINDNER JUPITER 2500,. Drive: 264 kW (2 x 132 kW), 2 x inverter, Rotor speed at 50 Hz: 57 RPM Rotor length 2500 mm. Blade size: 145 x 145 mm, Hydraulic power pack 11 kW, Vnl9jybxq All wear parts have been replaced, Machine weight: 35 t Length: 7100mm, Transport width: 2850 mm, Height: 3100 mm (without hopper) System tested, cpl. with Panel/control,. Incl. machine feet, maintenance platform, Hopper,. Test / demonstration by appointment possible. more
1
Rotor diameter 348 mm Working width 820 mm Inlet cross section approx. 800 x 1000 mm Hopper volume approx. 0,9 cbm Drive motor 22.0 kW Suitability: I9dgaud Reduction of residual and recyclable materials from wood and wood-like materials more
5
MOCO AZ11 shredder ----- -Power: 11 kW -Cutting factory Assembly: 25 meter, 1 Zack, 19 mm, very good -Cutting factory opening: 510 x 500 mm Ky7ml2bl -one side with wear plate MOCO ZB1 indentation device ----- -Power: 0, 55kW -enhanced funnel attachment -ideal for crushing of bulky, difficult to collect goods Including electric composite control with overload reversing function and interference substance detection ... more
4
Cutting of long and short residual wood, chipboard, packages or strips. Horizontal material feeding 87qjj0ftx Inlet: 1200 x 1200 mm Vibrorinne Rotor diameter: approx. 350 mm Width: 1200 mm Drive: 45 kW . No.: #7698 more
6
Very compact crusher for light grinding tasks. From German production. The AZ7 1994 was delivered new and never used. The machine is like new and has only minimal optical defects. The machine is equipped with many extras. The cutting unit has a high collection action and large throughput. In combination with the indenter, the crusher is very suitable for bulky plastic packaging, biomass and similarly easy to be crushed materials. The base is suitable for standard bins with 1100 liters volume. - ... more
2
Inlet cross section approx. 750 x 420 mm 7crc78dl Rotor diameter 250 mm Rotor speed 140 RPM Hydraulic 0.75 kW Drive 15 kW Weight: approx. 1000 kg #10223 more
3
-Power: 18.5 kW - cutting factory Assembly: 12 mm, saw tooth -Cutting factory opening: approx. 500 x 500 mm 00ptdtadm -two sides with wear plates (G-type) -Scraper - motor with Thermistors -Weight approx. 1200kg more


4 shaft sh...
every day

New machines via email!

Be informed!
1

2-shaft shredder EREMA Z 570

Zuzenhausen Germany
6603 km
USED
Item cross section approx. 700 x 750 mm Cutter opening 690 x 566 mm Number of knife shafts: 2 Iqgjh2j Number of knives: 16 Drive 22 kW Weight approx. 2500 kg . No.: #10308 more
4
- drive power: 11 kW / 24 1/min / ca. 4400 Nm - cutting segments: 37 pcs, 1 hook, 12 mm width, like new - cutting section: 510 x 500 mm - one side with wear plate - weight ca. 1000kg - incl. electrical control - incl. base frame Lqtbj - incl. hopper more
1
Item cross sectional area: approx. 2500 x 2000 mm Work cross sectional area: approx. 1500 x 1900 mm Rotor diameter 750 mm Rotor width 2000 mm Rotor speed approx. 45 rpm Drive system: 2 x 75 kW Weight 20000 kg 87qdut0xe . No.: #10009 Engine overhauled and ready to use more
2
Single-shaft shredder for softwood, chipboard, etc. Mo279 Inlet cross section approx. 1000 x 1200 mm Drive 30 kW more
3

2-shaft shredders ZENO ZDV

Zuzenhausen Germany
6603 km
USED
2-shaft shredder for wood Hopper opening: 2,500 x 4.000 mm Rotors: 2 PCs. Rotor flight circle: 575 mm Drive total: 88 kW The two gegeneinander ongoing rotors full steel are offered with various tool systems. These are massive, positive set, 2 x suitable crushing tools or 4 usable cutting edges on positive used tool holders. Coyudjy The 2-rotor system ensures optimal throughput performance for old wood, bulky, and similar materials. A very effective exposure of the impurities cont... more
3

2-shaft shredder ARP CS 5000

Zuzenhausen Germany
6603 km
USED
2-shaft shredder Einlaufqürschnitt 400 x 400 mm With pressing device and base frame drive 2 x 7.5 kW Gz07ixocq more
6
Inlet cross section: 1250 x 850 mm 3bowqmnx9 Blade width: 28 mm Number of knives 45 Engine: 37 KW New Cabinet New funnel New base The blades are in good condition. Weight: about 5000 kg Machine is ready for testing more
6
Single-shaft (rotor -) Shredder ZERMA ZSS 2000 Year 2013 2 x 55 KW, rotor width rotor diameter of 2000 mm, 457 mm Complete system with feeding conveyor belt discharge conveyor (bend belt conveyor) with excess Ribbon magnet 9qt9pfpyh Impression device hydraulic (2 levels) Wear protection Complete electric circuit very good condition, little run more
5
Two Shaft Shredder - Rotary shearShear bed: ca. 1900mm x 1600mmControl Cabinet, Hydraulic Aggregates and other supplies inclusive.Ideal for shreddering Car Wheels and other materials.There are two machines for sale including spare parts such as pumps and waves.The machine is demounted at the moment but can be reengineered as you wish.Further description is possible by phone inquiry.More pictures can be sent per mail.Price is negotiable. Dvxr0q more
6
MAWERA FOUR-SHAFT SHREDDER Condition: used excelent ready for operating Shafts nr.: 4 PCS M0u7x Engines: 2 PCS x 7,5 kW Control panel: NEW Shafts: NEW Blades: NEW Spare blades: 5 PCS Application: for wood, plastics, rubber; more
6
GRINDER TR 800 LTA 22 KW * Machine body in steel Fe 510 (UNI 7746) with high thickness, welded and with guaranteed stiffness by tensioning elements * Rotor in steel Fe 510 (UNI 7746) with high resistance with traction by commuter gearbox (with gears in oil bath) connected to the electric motor with transmission pulley / belt Ø 260 * Anti-stress device to absorbs the shocks to protect the rotor and the gearbox * Blades in special steel reversible and easily replaceable N° - mm 38 - 30X30 * Bla... more
3

Twin shaft Shredder VTR CMI 3000 Twister

Mortara (PV) - Italy Italy
6801 km
2011
USED
Mxs2tMotor: Diesel Iveco Cursor13 Power: 380 kW (510 HP) Opening frame: 3500x2500 mm Grinding chamber:2000x1600 mm Blade Thickness: 140 Year of costruction: 2011 Production: 15-25 ton/h Condition: running-good conditions more
6
Manufacturer MOROS Typ TC 75 YOC 1988 Machine-no. 9833 Drive power 55 kW 8gqjead8d Width feed channel 1.500 mm Rotor diameter 700 mm In use for: Shred of cardboard, paper, books, complete document files, etc. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. more
6
Single-shaft shredder, slow LAU fender especially suitable for the shredding of plastics. Filling opening ca: 2300 x 2050 mm rotor length: 2000 mm Rotordrehzal: approx. 80 U/min fair number rotor: 104 units Power: 110 kW with r & d Feed hydraulic: 4 kW sieve: 30 mm weight: approx. 10,500 kg dimensions ca: Lxwxh 4520 x 2800 x 3000 mm Control cabinet with control 1 discharge conveyor Lindner TKF with magnetic drum Gfwbi39 Funnel more
6
Manufacturer, type, year of construction: not readable + Dimensions of the system: Length: 3150 mm width: 1350 mm height: 1250 mm 8d9ztoyib + Throw cross section: 1000 mm x 1100 mm (can be increased to 1000 x 2500 mm) + Mixer: Working width per section: 700 mm Drive / wave: geared motor 5.5 kW, 50/60 Hz Speed: 45 rpm + Food processor: Working width per section: 500 mm Drive / wave: 7,5 kW, 50/60 Hz Speed: approx. 1700 RPM Hole screens can be used 1 sieve availab... more
6
MAWERA FOUR-SHAFT SHREDDER Condition: used excelent ready for operating Shafts nr.: 4 PCS Engines: 2 PCS x 7,5 kW Control panel: NEW 9n7myb9bw Shafts: NEW Blades: NEW Spare blades: 5 PCS Application: for wood, plastics, rubber; more
5
Shredder WS 15 Working hours: 70 hours Conveyor system System consisting of: -Conveyor belt under WS 15 with knock role -Permanent magnet with steel construction Vfj7vuvfu -Conveyor belt The machine was installed two months ago and is in like new condition. From store stock. more
5

Two-shafts shredder Holzmaic

Mortara (PV) - Italy Italy
6801 km
USED
This machine is mounted on 20 tf container frame (so it is possible to move it with a truck) and it has mercedes diesel 8 cilynder with a dinamo that moves a 190 kW electric motor on the shafts and a 50 kW electric motor for auxiliary system. Blade's thickness is 100 mm and the input opening is 1200x2300 mm. Mtxuyc It was used mainly to work car and truck tires, alluminium, washmachines and light scap too. more
5
Manufacturer Shred Pax Typ AZ-7H Machine-no. 240-8426 Drive power 5,5 kW Feed channel 750 x 750 mm (l x w) Dimensions cutting unit 400 x 300 mm (w x d) Width knives 15,5 mm Width knives neck 19 mm In use for Shred of paper, books, complete document files, plastics, textiles etc. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. 8gfgy0cu8 more
6
Manufacturer Doppstadt Calbe GmbH Type DW 2560 E1 Bueffel Year of construction 2007 Drive power 210 kW Rotor 2.500 x 600 mm (l x d) Rotor revolution speed 31 rpm. Througput rate capacity up to 40 t/h, depending on material Total weight approx. 24,1 t Motor Manufacturer T-T Electric Type LAK 4225 A Drive power 210 kW (460 V / 489 A) Hydraulic unit Manufacturer Hansa Flex Drive power 7,5 kW Dimensions Machine dims. without chute 6.240 x 2.300 x 3.150 mm (l x w x h) Feeding measurements 3... more
2
Inlet cross section: 2500 x 1700 mm Bmvcdzm2 Drive: 160 kW Rotor flight circle: 670 mm Interfering substance removal: hydraulically prestressed and to open doors for interfering substance removal Rotor version: 14 PCs. positive cutting plates 120 x 120 x 55 mm on tool holders Counter knife with cutting gap adjustment Feed device: hydraulic Hopper: 1,700 mm high, with circulating pipe line tube Machine weight: approx. 24,000 kg more
6
Technical parameters: Manufacturer: ZERMA Type: ZSS-1000 H Prod. Year: 2008. Condition: used, in perfect condition, ready to operation Installed power: 22,5 kW Shaft lenght: 1000 mm Voltage required: 400 V/ 50Hz/ 3 fase Hopper size: 1140 x 1200 mm upper side; 900 x 1200 mm down; Nr. of shaft: 1 db Blades: 90 pcs delta shape blades, brand new, very sharp; Sieve: yes Sieve diameter: 3 pcs with different hole diameter Pneumatic pusher: yes Emergency stop: yes 9md7bxv3z Engine protection: ye... more
4
Single-shaft shredder ideal for the milling, granulation of vorgeschreddertem material. Vprvf8xb Application: industrial waste for thermal or wertstoffllichen recovery such as paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Performance: 2 x 160 kW (320 KW) Control Panel/Panel: complete filling hole: 2825 x 1700 mm Einvuellvolumen: approx. 4,5 m3 Job opening: 28250 x 1315 mm Rotor length: 2825 mm Rotor flight circle: 740 mm Number of rotor blades: 80 p... more
6

Three shafts shredder Satrind 3R 15/320

Mortara (PV) - Italy Italy
6801 km
2008
USED
Satrind three shafts, complete with discharge conveyor belt and hopper Dfwpd8iwg Power unit: 238 kW (320 HP) Grinding chamber size: 1510x1100 Blade thickness: 50 to 100 mm Condition: just revised, new blades more
6
Manufacturer Shred Pax Typ AZ-7H SNP Machine-no. 240-8425 Fxquwcqz Drive power 5,5 kW Feed channel 750 x 750 mm (l x w) Dimensions cutting unit 425 x 320 mm (w x d) Width knives 31 mm (2 x 15,5 mm, twin knives) Width knives neck 35 mm In use for: Shred of paper, books, complete document files, plastics, textiles etc. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. more
3
Four shaft shredder equipped with electric oven (control) Year: 2017 Complete Revision Very good condition. Motor power kW: 22 (2x11) Cutting: Cutting width mm: 460 Cutting Opening mm: 500x460 slices mm: 200 Number of blade shafts: 4 speed main shaft r / min: about 23 rpm side shaft r / min: approximately 34 grid of holes mm: 30 (sieve diameter) Dimensions: Length mm: 1400 Width mm: 1200 Height mm: 2.000 funnel opening mm: 1200 x 1200 Weight kg: 2,000 approx On request, other perforations (15-70... more
3
Hopper: 800 x 1000 mm Motor: 11 kW - suitable for light materials B9xic0zj Screen: 20 mm for G30 material PLC control Klöckner-Moeller for chipboard and softwoods V-rotor, diameter 252 mm with indexable inserts Dust nozzle diameter 200 mm Dimensions approx. 1950 x 1450 x 1990 Weight approx. 1000 kg more
6
TYPE MODEL: VZ 17.00 -551 MANUFACT. YEAR: 2011 ENGINE PROD. TYPE: NORD SK 132M/4 PERFORMANCE: 7,5 kW DRIVE PROD. TYPE: NORD DRIVESYSTEM 73F- 132 M/4 Torque: 4529 Nm Encb93b Shaft length: 400 mm Working space: 400 x 500 mm Sound level: 70 dBA Dimensions: 1900 x 940 x 2000 mm Weight: kb. 1.500 kg more
5
Underframe for Untha 4-shaft-shredder RS100 Main-measurement: LxWxH = 4.3 x 1.87 x 1.8m Steel-construction with laterial Podest with railings and access-ladder. C39r3boq Included ist a crane-way-frame for changing cutting-system. more
3
The operation of the machine is almost silent, as the dust is extremely low. The working principle of the machine based on the fact that two oppositely disposed knife shafts run into each other. The cutting discs are individually replaceable and can be sharpened easily. When overloading the drive motors, the direction of rotation of the machine is switched automatically to prevent blocking. After a few seconds the system automatically switches back to the working direction. The automatic directi... more
2 - shaft shredders or Ball Wolf called, tears which pressed Recyclingmateri9al as plastic or cardboard or other material and crushed. Hopper is 1.2 mx 1.2 m The rotors are superposed diameter 500 mm low speed with 37 kW drive Coory2h more
3
Four shaft shredder equipped with electric oven (control) Year: 2017 Complete Revision Very good condition. Motor power kW: 22 (2x11) Cutting: Cutting width mm: 460 Cutting Opening mm: 500x460 slices mm: 200 Number of blade shafts: 4 speed main shaft r / min: about 23 rpm side shaft r / min: approximately 34 grid of holes mm: 30 (sieve diameter) Dimensions: Length mm: 1400 Width mm: 1200 Height mm: 2.000 funnel opening mm: 1200 x 1200 Weight kg: 2,000 approx On request, other perforations (15-70... more
4
Single-shaft shredder ideal for the milling, granulation of vorgeschreddertem material. Application: industrial waste for thermal or wertstoffllichen recovery such as paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Work capacity: 1 x 200 kW Enclosure: complete with r & d Filler: 1770 x 1700 mm Einvuellvolumen: approx. 3m 3 Job opening: 1770 x 1315 mm Rotor length: 1770 mm Rotor flight circle: 740 mm Rotor speed: approx. 200-350 RPM Number of blad... more
6
Two-shaft shredder Suitable for the pre-crushing of waste, plastics and light metals Similar raw materials. Manufacturer: MEWA Type: UC-60 Year: 1997 H2jzc8t Wave length approx. 600 mm Cutting discs Ø: approx. 250 mm Cutting disc width (blade width) 30 mm Cutting discs: 12 pieces per shaft Funnel opening at the top approx. 1200 x 750 mm Height of funnel approx. 840 mm Feed opening Shredder approx. 600 x 750 mm With frame frame approx. 2660 x 2010 H 125 mm With geared motor (type plate not read... more
1
GM Nr.: 09074 Size of cutting unit: 480x580 mm Jueowm Drive power: 2 x 11 kW Knife width: 30 mm Number of knifes: 24 Diameter of hole sieve: 30 mm Year of manufacture: 2010 Complete with machine frame, funnel and control unit more
5
The M 22-60 is a high-performance single-shaft shredder for many tasks, such as the pre-cutting of cables, the shredding of electronic waste, waste plastics, wood etc. In contrast to other single-wave machines, the shredder by IRS has two instead of a stator for better product quality and higher hourly output. The optimized arrangement of the rotor blades reduces also the energy consumption. The horizontally-acting hydraulic pusher features replaceable wear strips and adjusts the pressure on... more

2-shaft shredders Vecoplan VGZ 250

Bergatreute Germany
6737 km
2003
USED
Shredder for primary crushing of large material Working width 2500 mm Working depth 1700 mm 2 x 132 kw electric motor drives the hydraulic drive. Cb3jqc3c more
6
Four shaft shredder equipped with electric oven (control) Year: 2017 Complete Revision Very good condition. Motor power kW: 37 (2x18,5) Cutting: Cutting width mm: 760 Cutting Opening mm: 700x760 slices mm: 230 Number of blade shafts: 4 speed main shaft r / min: about 23 rpm side shaft r / min: approximately 34 grid of holes mm: 30 (sieve diameter) Dimensions: Length mm: 2000 Width mm: 1280 Height mm: 2.000 funnel opening mm: 1300 x 1280 Weight kg: 2,000 approx On request, other perforations (15-... more
6
Used singleshaft shredder KOMPTECH TERMINATOR 6000. This maschine is in Germany near Potsdam. Knxxwr72 more
4
Double shaft shredder with low hours working Capacity 100 m3/h Feed-in 1820 x 2500 mm Rotors 2 unit. D = 630 mm (with interchangeable tools) rotational speed 30 rpm Motor 2 units a 90 kW frequency transmitter 2 units Input pocket of the crusher is equipped with hydraulic door (manual) and a bypass slope. Qy8z7q8p8 RAUMASTER double-shaft shredders are built for extreme-duty, delivering throughputs of up to 100 to/h. Unlike old-style dual-shaft shredders, the two cutting rotors on RAUMASTERS dua... more


4 shaft sh...
every day

New machines via email!

Be informed!

to

to

Change search
4 SHAFT SHREDDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.