Used Rex for sale (45)

Condition: good (used), Table milling machine type 59F Milling stop with fine adjustment Isdpexzinksfx Adnea left/right rotation Good condition, cast iron machine 30 mm spindle

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm - width 170 cm - height 210 cm Iedpfx Ashikplsdnoa - weight ~ 3500 kg

Condition: excellent (used), functionality: fully functional, Rex hacksaw circular milling cutter Iedpsu R A Tmsfx Adnoa

Condition: new, Year of construction: 2024, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2 l per day Isdjqvlw Iepfx Adnoa Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REX RVF 436 Vacuum Filler with Loading System Manufacturer: REX Technologie GmbH Model: RVF 436 Year of manufacture: 2020 Power: 8 kW Power supply: 400 V Frequency: 50/60 Hz Current consumption: 3 × 16 A Isdoxxm D Depfx Adnja Machine number: 4362881020 Vacuum pump Manufacturer: Busch Model: R5 KC 0016 E Year of manufacture: 2020 Achievable vacuum pabs: 20 hPa (mbar) Pumping capacity vmax: 19 m³/h Rotational speed: 3600 min⁻¹ Weight: 18 kg Oil type: Busch VM 068 Oil quantity: 0.3 l Serial number: CZM120350215 The REX RVF 436 vacuum filler with loading system is equipped with a Busch vacuum pump. Designed for precise filling of stuffing under vacuum conditions. The machine ensures high portioning accuracy and a homogeneous product texture thanks to the Busch R5 pump, which provides stable vacuum, resulting in uniform stuffing structure and precise portioning.

Condition: used, Rex Homs 860W planer Ijdpferwwc Hsx Adnja Max working width 860mm Max working height 310mm

Condition: refurbished (used), Year of construction: 2009, Rex stainless steel bowl cutter Capacity 125 litres With unloader arm and disc 2 speed knife shaft 1,500 / 3000 rpm Iodpet Da Elsfx Adnja 3 speed bowl Safety interlocked lid Currently being refurbished

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence Iodpji Aphvsfx Adnea - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: ready for operation (used), Special unit 18.5 kW Iodpfxeqwdwws Adnoa Up-down controlled sawing milling grooving Further accessories and spare parts in the jöma store

Condition: new, Year of construction: 2024, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Isdpfx Ajqvlvmodnoa Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low-noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: used, Year of construction: 1998, functionality: fully functional, Offered is a Düker REX RK 30 H bowl cutter for sausage production. The machine is fully operational and ready for immediate use. Technical data: 400V, 32A, 5.2/6.5kW. Knife shaft with 2 speeds: 1,500 / 3,000 rpm, stainless steel bowl. Cutting chamber cover is made of aluminum. Further details upon request. Payment by cash or advance bank transfer. Sale to business customers only, no guarantee, no warranty. Iedpfx Adsxt Rucenoa

Condition: used, Technical details: throat min.: 2600 mm throat max.: 4200 mm Iodpfou Nlqfsx Adnsa Support arm position: 360 schwenkbar / swiveable ° weight of the machine ca.: ca. 1,5 t Welding stand for positioning of a welding torch / welding source on big work pieces - diameter of frame = 1480mm - all adjustments have to be proceeded manually On sale without welding source. i.D. *

Year of construction: 1996, condition: used, Planer Rex Homs 310 With scoring saw from below Iedpfxechrgre Adnea Planing shafts top and bottom Planing width 310 mm without feed. Feed was here from the endless press of the zinc plant

Condition: excellent (used), Catalogue number 7253 Ijdjrgqw Nepfx Adnea TECHNICAL DATA - Spindle diameter: 25 mm - Spindle working height: 130 mm - Interchangeable spindle - Spindle lock - Height adjustable (up/down) - Original cast iron fence - 2 spindle speeds + right/left rotation - Table dimensions: 955x740 mm - Motor: 3 kW - Dimensions (L/W/H): 1160x750x1050 mm - Weight: 458 kg ADVANTAGES – Made in Germany – Used milling machine – Very good condition Net price: 5100 PLN Net price: 1210 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: used, transversal substructure for planing machine Move the planing machine in order to be able to use the planer knives over the entire knife length and the zero line is retained REX Hobelmaschine Querverstellung REX planing machine transverse adjustment Réglage transversal de la raboteuse REX Iedpfx Adsimz Egsnoa Length 2850 mm / width 2600 mm / height 250 mm + bracket 215 mm

Condition: new, Year of construction: 2024, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2.5 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors Iedpfx Adjqvlu Eonja operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: used, Year of construction: 1996, Price: On request Double-sided planer REX HOMS 630 Serial No. 16831 Iedpewng Ikofx Adnsa 380V, 102.6Amp 67.5HP Equipped with 3 planing shafts 1st under 15kW 2nd under 11kW 3rd above 18.5kW Max planing width 630mm Min-max planing height 10-310mm Max chip removal upper planing shaft 15mm Max chip removal lower planing shaft 10mm - Year: 1996 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Technical details: throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar ° weight of the machine ca.: ca. 1,75 t dimensions L x W x H: L:5,0xB:1,6xH:2,8 m space requirements of the machine approx.: 6,61x1,4x2,8 m Iedpeu Nwyrsfx Adnea WELDING STATIVE for positioning a welding torch/welding source on large wide workpieces. - The device for adjusting the gas cylinder is integrated in the frame. - Dm of the base frame = 1480mm - All adjustments are made manually. - With welding device Make: KOLBE; Type: SC 400 - 400A; protection P21; cooling E; input 380V/21kVA; welding 400V / 34V; water cooled; - Welding steps: 3x coarse and 12x fine - feeding device (removable) with 13,5m cable to the welding device - Hose package water cooled (4,0Meter) *

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW right head motor 7.5 kW Iedpfx Asiqflbsdnja left head motor 11 kW feed motor 7.5 kW electric height adjustment smooth change of feed speed

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW Ijdpfxswbz Huo Adnea - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: used, Planer spare parts Isdpfxoqwgtus Adnoa spare parts REX planer spare parts REX Pinneberg REX JUMBO REX HOMS REX UNI REX TIMBERMASTER

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, year of last overhaul: 2022, A complete BSH production line is for sale. The plant consists of components from System TM (feeding section), Keilzinken Technik NKT, HIT automation (multi-level storage, transport, lamella feeding repair station, planing and Kallesoe, etc.). Planing machines from REX: pre-planer, lamella planer and finish planer. High-frequency press from Kallesoe. 2 silos. Iodpfswgcchsx Adnoa

Condition: ready for operation (used), planing width: 1,350 mm, planing height: 200 mm, Thickness Planer Manufacturer: REX Model: 1350 Thickness planer with constant table – upper section with cutterhead is height-adjustable Planing width: 1350 mm Planing height: 10 mm – 200 mm 4-knife cutterhead, motor power: 22 kW Feed via conveyor belt Feed motor: 2.2 kW, feed speed approx. 2 – 9 m/min. Thickness setting and positioning control via control panel with digital display Including setting gauge Including hydraulic hand press for knife clamping Including spare knives Total connected load: approx. 29 kW Weight: approx. 3,500 kg Dimensions: approx. 2300 x 1400 x 2000 mm (LxWxH) + control panel approx. 1000 x 480 x 1200 mm (LxWxH) Iodpfx Adoxguf Ssnoa Transport dimensions: approx. 3200 x 2100 x 2300 mm (LxWxH)

Condition: like new (used), spare parts + accessories Isdpfx Adelifbdensa Rex + Kupfermühle + GreCon + Dimter + Cook Bolinders various in stock Kupfermühle Rex Dimter Grecon Cook Bolinders

Condition: good (used), table length 1,500 mm / width 760 mm, Ijdpfx Adsimz D Usnja Motor 4.0kW (originally for REX HOMS 760) Chip removal of the pre-dressing knife shaft max. 10 mm Speed of the blade shaft VA D=140 mm, Z4: approx. 4200 rpm. suction connection D= 140 mm Condition functionally tested >>REX New price over 20,000 €