4 unit buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Capacity cassettes: LxWxH: 6.500x680x600mm, 1,5t, 2.606pcs. + 66 free spaces for hiking cassette principe; Total storage places: 2.671pcs.; 6 storage and retrieval machines as gantry crane in double blocks; System Dimension: LxWxH 31.190x48.960x16.550mm (without stations); 6 vertical orbital stations with weighing and lift out; 3 orbital stations; Control Siemens S7; KASTOLVR; SAP interface; 400V/50Hz 570kW; Hall 32 G8xlg9 more
5
Quills processing unit, drilling machine, drilling machine, drill press, multi spindle drilling machine, line boring machine, dowel drill drive 0.25 kw-speed 2755 rev / min drill head 12 mm 8x boring heads available-price-piece dimensions 700/120/H150 mm Weight 11 kg / piece Qlpeh332p more
3
internal grinding diameter 0 mm grinding depth 0 mm 0ueazubi min. dia. 0 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
3
380 Volt power requirement 1,0 kW Ieizbwr turning speeds 850 - 8.000 U/min weight of the machine ca. 35 kg. more
6
travels: - X - lengthwise 1,120 mm - Y - cross 345 mm - Z - vertical 400 mm clamping surface 1,600 x 400 mm table load 1,500 kg spindle holder SK 50 - electromechanical tool clamping system swivelling milling head spindle speeds 18 steps 28 to 1,400 rpm Mujpx infeeds: X - Y 18 steps 16 to 800 mm / min Z - 18 steps 5 to 250 mm / min rapid traverse X and Y - 3,150 mm / min rapid traverse Z - 1,000 mm / min coolant device electrical data 380 V / 18.5 KW weight approx. 4,100 kg doc... more
5
welding current - continuous: [...] A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - charakteristic constant - type of protection IP23 - type of isolation F - water cooled equipment: 7dfymfqiw -MAG hose package - wire feed type CK 68Z [...] more
2
Baumüller BUS20-80/135-30-001 servo power unit, mint condition, serial number according to the photo, used, completely cleaned and tested, 100% work, included with com. photos Qqzmd88 more
5
filter output 155 l/min grade of filtration 5 µm filling capacity 2380 l Filth-tank 1680 l Clean-tank 700 l Filter capacity 4,50 m² volume capacity 150 l/min total power requirement 12,00 kW weight of the machine ca. 2,86 t dimensions of the machine ca. 3,50 x 3,20 x H2,80 m Lid8t more


4 unit
every day

New machines via email!

Be informed!
3
welding power 320 A welding power ED 60% DC 320 A welding power ED 100% - 250 % voltage 400 V 83ozattlj weight 87,0 kg range L-W-H 1.100 x 465 x 748 mm more
6
Unitech GX 1000 (Bridgeport / Hardinge) Year of construction: 2007 Control: Siemens 810D - Shop Mill Spindle speed: 10,000U / min Mounting surface: 1120x540mm Table load: max. 700kg Traveling distances (X / Y / Z): 1000/540/540 Tool holder: SK40 24x tool changer Qdogiakr chip conveyor internal cooling Drill breaking control (Brankamp) 4th axis Hoffmann RW / NC-220 Installation dimensions: 3,13x2,02x2,6m Weight: 5400kg Without screws! Without tools! was regularly maintained Very good condit... more
3
lifting capacity: 0,25 t lift: - mm span width: mm height lower edge cantilever arm: 3100 mm jib length load hook end position: 3500 mm crane classification: H2-B2 swival range : 355 ° cantilever arm length from center column: 3720 mm lifting height max. hook position: 2400 mm column diameter: 325 mm dimensions base plate: 0,6x0,325-0,625 m total power requirement: 0,9 kW weight of the machine approx.: 760 kg dimensions L x W x H: 3,9x0,63x3,85 m crane control with panel keyboard with emerge... more
5
Tool holder, milling cutter holding fixture, milling tool-20x taper ISO50 shots 22-50 mm chuck chuck surface Reducing cutter head face milling cutter spindle tool is only completely sold-Weight 70 kg Hinwfmtoy more
3
Balluff until C-400-002/04 processor unit to C, serial number according to the photo, used, normal wear, 100% functional, included with com. photos D3cyc78ru more
6
grinding wheel diameter 100 mm power requirement 6,20 kW turning speeds 23000 U/min taper ISO 50 total power requirement ca. 13,00 kW weight of the machine ca. 1,20 t dimensions of the machine ca. m Hierbei handelt es sich um eine IBAG Schnellfrequenzanlage bestehend aus SF-Motorspindel HF 145 S, Kühlmittel und Zubehörwagen 45 KWAG-15 und HF- Qmb09hdoi Converter 9543 mit Steuerpult. Mit div. Spannzangen und manueller Spannzangenklemmung Spindelanschluß SK 50, Abtragsleistung 364 cbcm bei A... more
1
klicker for almost all horizon machines Buvco9cw more
4
welding power 5 - 250 A (stufenlos) welding power 100 % ED 175 A welding power 60 % ED 200 A Sr2pv0 more
3
welding current: 400 A height: 0,8 mm power consumption: 12,6 kVA Ywjd2w9y weight of the machine approx.: 230 kg dimension machine [...]: 1,3x0,6x0,8 m space requirements of the machine approx.: 1,0x0,5x0,7 m Welding Transformer TIG-Welding water cooled , cooling type F, protection type IP21 - drirect current DC equipment: with hose package with earth cable TIC welding burner without pliers, without pressure regulator, without wire feed! more
5
PLC, the SIMOTION C240 ​​MOTION Controller, CPU type manufacturer with Siemens Simatic S7 6ES7 318-3FL00-0AB0 -12x controls available per prize package -Dimensions 120/120 / H115 mm -Weight 1.3 kg Isfst9bri more
3
A14B-0067-B001 Fanuc serial number in accordance with photo which was device in January 2016 as a spare part for a machine ordered power unit, but not used, used, properly completely overhauled and tested with, 100% functional, included with com. photos Mzxkr more
4
First Installation: 2014 Speed: up to 100 m/min. stacking up to 700 mm Yrhppg Additions: 5 Flachstapeltransportwagen und Unteregestell more
5
liter capacity 950 l content 950 l diameter 1250 mm height 1075 mm Qmcgte82p total power requirement kW total power requirement kW weight of the machine ca. 1,20 t dimensions of the machine ca. m more
4
welding power 25 - 350 A (stufenlos) Mdyrz welding power 100 % ED 260 A welding power 60 % ED 300 A more
1
klicker for almost all horizon machines Qnqj0bhof more
4
End-milling cutters, end mills, milling cutters Two-Schneider-finishing cutter diameter 32 mm usable length 53 mm corner radius of 2 mm type HSSE Co 416H-R21 30 -180 Number 80-2948 10 Piece is completely sold-weight 6.8 kg Cmedbwy8 more
5
FANUC A03B-0402-B001 control unit + power unit A14B-0048-0002, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Bymkwxqg more
6
The head of the double reel can turn motor, so that on the one hand a coil can be inserted, while on the other hand continue (swing operation). Vsauum The Dibalex band directional machine was 2012 being retrofitted. Technical data double reel H 5005 MD: Built in 1994 Federal load per page: 5,000 kg Flange inner diameter: 450-530 mm Outer diameter: normal 1500-1580 mm, maximum: 1800 mm Band width: 160-500 mmBandgeschwindigkeite: 6.0-34.0 m / min Rotary way: 180 ° Total we... more
6
passage width 200 mm working heigth 28 mm container volume No.:1: 400 l container volume No.:2: 200 l container volume No.:3: 200 l total power requirement 105,00 kW weight of the machine ca. 2,00 t dimensions of the machine ca. 5,00 x 3,20 x H2,00 m Durchlaufanlage mit: Reinigen: - Beh. 1: 400l; 1x Pumpe 16m³/h, 4bar; 4x Heizstäbe á 9KW - Beh. 2: 200l; 1x Pumpe 1,5m³/h, 2bar; 2x Heizstäbe á 9KW; Kaskade (Pumpe) 2m³/h, 2bar Fh037ht - Beh. 1: 200l; 1x Pumpe 2m³/h, 4bar; 2x Heizstäbe á 9KW R... more
5
weight max. 20 t max. wheel diameter 360 mm range L-W-H 2.000 x 700 x 800 mm Syxqf0phm more
4
Mobile suction unit manufacturer Einhell Motor: 230 Volt, 550 Watt air power: 1150 m3/h Volume: 65 l Bafpscq2mi Location: Off the shelf 54634 Bitburg more
3
FANUC A06B-6050-H103 velocity control unit, serial number in accordance with Fotogebraucht, properly completely overhauled and tested 100% functional with 12 months warranty, D292wrop8 more
6
S8wcbeykzsheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: [...] m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° more
3
diameter 0 mm Shank diameter 53 mm Df9welz2e Head diameter 69,3 mm length in total 128 mm Conus 30 Grad thread M 47 x 1,5 links daylight max. 32 mm weight of the machine ca. t dimensions of the machine ca. m more
4
welding power 30 - 400 A (stufenlos) welding power 100 % ED 300 A welding power 60 % ED 370 A Ytu7txsvw more
4
grinding wheel diameter 100 mm power requirement 2,4 kW 9tk9j3yae speeds 1000-13500 U/min weight ca. 20 kg range L-W-H 500-300-400 mm more
5
Quills processing unit, Drilling, drill, drill press, multi-spindle drilling machine, Multi-head drill, anchor drill br / br / -max feed stroke mm br / -without drive br / recording collet br / -Built collet 4 mm br / -1x drill heads available br / award piece br / -dimensions 110/55 / ​​H430 mm br / weight 6 kg / piece Ur02a2ko7 more
3
FANUC A06B-6050-H104 velocity control unit, with A20B-1000-560/10E, used, normal wear, 100% functional Hssdxy27 more
6
length: 6000 mm Dyf8aud width: 2500 mm height: 2500 mm weight of the machine ca.: ca. 7.,0 t Energy Container - 3 x pcs Wind Generators with each 3 wind turbine blades - 32 x solar plates - 1 x Diesel Generator 5,0 kW - 1 x tank - 1 x control cabinet - 20 x batteries EFFEKTA BTL 12-200 -inverter is missing additional components diesel generator solar plates wind generator storage bank more
4
liter capacity 250 l/min tank capacity 2800 l Coolant high preasure pump 40 bar Coolant high preasure pump 38,80 l Liebn total power requirement 22,00 kW weight of the machine ca. 1,50 t dimensions of the machine ca. 3,30 x 2,00 x H2,00 m Unit for max. 3 machines. 1x pump 250 l/min 3x High-Pressure-Pump 38,8l/min - 40bar more
3
specific output 20.2 liters/min operating pressure max. 4 bar Bextsjl tank capacity approx. 160 liters tank capacity at centre of filling level indication approx. 140 liters pump: - Rickmeier R25/16 FL-Z-DB more
4
Digitalanzeige Werkzeugspanner Ausfahrbare Pinole DRO Aumomatic tool clamping Extendible quill Technische Daten / technical details: laengs automatisch / X-travel longitudinal 1120 mm Tquer / Y-travel cross 345 mm Tsenkrecht / Z-travel vertical 400 mm Tischgroesse / table size 1600x400 mm Spindelaufnahme / spindle taper SK50 Drehzahl / spindle speed 28-1400 UpM /rpm Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehoer und Beschreibung der Maschine sind unverbindlich - Technical... more
5
Modular units, sizing unit, Zerspanaggregat, milling unit, trimming unit, trimming unit, trimming unit, double end, edge banding machine, Ritz engine, Zerspanermotor, milling motor for edging machine br / br / -HOMAG milling unit for Premilling br / -with severe dovetail br / -Fräsaggregat pivotally br / -1 x engines Perske br / motor type KNS 71-12 / 2 br / rating 3.0 / 4.4 kW br / br -voltage 220/380/380 volts / frequency 50/100 Hz br / pot reference 2880/5880 U / min br / -Other Motors with ... more
3
FANUC A06B-6047-H203 velocity control unit, serial number according to the photo, used, low wear, 100% functional, included with com. photos 9fdsiuxmb more
6
Tptes7cklfeed pressure: 60 bar drive power: 22 kW liter capacity: siehe Typenschild l more
3
Configuration: online or offline, pinfed transportation Speed: up to 150m/min. Rx8ct80sd Additions: set-up and format change automatically, stacker up to 700mm more
3
Machine type MIG/MAG welding unit make MERKLE type RedMIG 2800 K Bahbyebjyv Plants no. 69248 Supply voltage 3 x 400 volts Setting range 25-280 ampere Duty cycle 30% ED with 280 ampere 60% ED 210 amp Power setting 14 gears Cooling transformer by built-in fan Cooling TIG torch Run portable compact system Wire Feed toothed 4-roll drive DV 26 Securing 16 ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 7 years State factory held tested well with... more
3
diameter 0 mm Shank diameter 0 mm Head diameter 0 mm length in total mm Conus Grad daylight mm 2gcqpqb29 weight of the machine ca. t dimensions of the machine ca. m more
5
Finish aggregate, buffing, modular units, sizing unit, double end, edge banding machine, according to the scraper for edging machine br / br / -without drive motors br / -HOMAG finish aggregate for cleaner job with buffing for disposal of glue residues on PVC edges br / -with oscillation br / swivel action br / -3x aggregates available br / prize piece br / -dimensions 400/160 / H225 mm br / weight 5.7 kg Jtk0ge more


4 unit
every day

New machines via email!

Be informed!

to

to

Change search
4 UNIT
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close