Moulder for sale
Your location was not identified (Edit)
WEINIG Unimat 23 laminating machine, 8 shafts
Year of manufacture 1994
P/N 023-1248
Feed 7,5 Kw
Feed of servomotor 0,75 kW
Feed motor with brake
all spindles with diameter 50mm
50mm diameter spindle
feed rate 6-50m/min
3 driven table rollers
( after the dressing spindle, before the 1st horizontal spindle , between the 1st and 2nd column )
Pneumatic pressure rollers
Trimming stop
Control panel free standing
without soundproof cabin
Spindle arrangement:
1. bottom / spindle motor / saw stand, horiz... more
CATTELAN - ZIMAC planing and profiling line
For pallet wood with jumping spindle, chamfering units, automatic de-stacking and stacking automatization.
Consisting of:
- ZIMAC vacuum de-stacking
- ZIMAC automatic infeed system, type CN\2
- CATTELAN moulder, type KSA 320
with jumping spindle and chamfering units
6 spindles with 2 pc. chamfering units
Max. feed speed 60 m/min
Bl2kksbviu
- Transport belt
- CATTELAN double en tenoning machine
2 x 3 working spindles
- ZIMAC transpor... more
1996
excellent (used)
Type: Profimat P23
Used machine
5 working spindles
working width: 13 - 230mm
working height: 6 - 120mm
Engine power down: 5,5kW
Engine power left, right: 7,5kW
Engine power top : 7,5kW
Engine power below: 7,5kW
Motor power feed: 0,75kW
feed speed: infinitely variable
Year of construction: 1996
Ystoj8
Location: Warehouse / 54634 Bitburg more
2011
excellent (used)
CATALOG NUMBER 5246
TECHNICAL DATA
max. width of the workpiece 230mm
max height of the workpiece 170mm
min the length of the workpiece 230mm
number of spindles 9
1) horizontal lower 230mm 7.5kW
2) vertical right 170mm 7.5kW
3) vertical left 170mm 7,5kW
4) horizontal right 170mm 7.5kW
5) horizontal left 170mm 7.5kW
6) horizontal upper 230mm 7.5kW
7) horizontal lower 230mm 7.5kW
8) horizontal upper 230mm 7.5kW
9) horizontal lower 230mm 7.5kW
all spindles adjustable up / down, right left +
diame... more
Four-sided planer griggio prod Italian
max planing width 180mm
max. planing 120mm
5 spindles, last universal spindle
4KW bottom, 4KW right, 4KW left and 4KW top, 4KW university
Clrmyin
electrically adjustable planing height + manouvering
feed rate at 2 speeds
machine in good condition
power supply 380V more
used, cleaned, function checked,
test run, greased,
Vorschubketten renewed and new adjusted,
spindle rotation:
B20mng
2/100-0/100-1/100-0/100-2/100-1/100 mm
manufactured by Weinig
type U - 16 - K
built in 1975
Masch.-No. 570/799
number of spindles 6
spindle alignment:
u - right hand - left hand - o - u - right hand
motors:
4 - 3 - 5,5 - 5,5 - 3,0 - 5,5
planing width ca. 160 mm
planing height ca. 120 mm
table length ca. 2000 mm
pressure bar planer heads
table lubrication
feeder vor der surface p... more
1971
ready for operation (used)
WEINIG Profimat 22N
Year of manufacture 1971
SN 2646-555
maximum workpiece width 220 mm
maximum height / workpieces 130mm
7 spindles:
1. horizontal / bottom 220 mm 5,5 Kw
2. vertical right 130mm, 7,5 Kw
3. vertical left 130 mm; 5,5kW
4. vertical right 130mm, 7,5 Kw
5. horizontal / TOP 220 mm 15 kW
6. horizontal / BOTTOM 220 mm 5,5 kW
7. universal 220 mm, 7.5 kW
- diameter of spindles 40mm
- Feed speed control 6-22 m / min
- 3 kW feed motor
- Central lubrication of the table top
- length of th... more
Number of spindles 6 St.
Working width 230 mm
Working height 120 mm
Length of the planing table 2000 mm
Feed motor 3 kW
Feed speed 5-24 m/min.
Dimensions (L/W/H) 3900x2200x2000 mm
Weinig fourside moulder Profimat 23, Window version with possiblity to divide
Opdknj77
out glazing bead and ATS program control
-----
Technical Specifications Summary
(possibly additional accessories please inquire)
[...]
General
[...] [...]
> Working width: 230 mm
> Working height: 120 mm
> Number of spindles:... more
Very well preserved planer line “Hundegger type HMD”, machine number 2715. Excellent condition, not used much! Complete control with infeed and outfeed roller conveyors. Complete steel substructure. The machine is ready for operation immediately including all cables! Year of construction 2000. The mechanization is designed for a length of up to 12,0 m. Vf. adjustable. Wood dimensions:
width: 30 mm - 400 mm
Oelmh
height: 15 mm - 300 mm
Length: 2.5 m to 12.0 m
Complete including stronger drive mot... more
Four-sided planer SCM P 64B
Working width 180 mm
Working height 120 mm
spindle 1: lower horizontal, 4 kw motor
2/3 spindle: vertical, 5.5 kw motor
Bgbiughe
spindle 4: top horizontal, 4 kw motor
Left spindle mobile, quick automatic adjustment
two-stage feed
electrical height adjustment
the dimensions of the machine: 2650x1200x1800h mm
the weight of the machine: 1200 kg more
TECHNICAL SPECIFICATION WACO TYPE 2000 FOUR-SIDED PLANTER
- max planing width 225 mm
Fgmkqlsj
- max planing height 100 mm
- The minimum board thickness is 6 mm
- The planer has 6 spindles
- 5 motors - 18kW and one 55kW blade cutting motor
- feed speed 80m / min
- diameter of spindles 45 mm
- spindle speed 5000 rpm more
7-head moulder max. 220x120 mm, heads (BOTTOM-RIGHT-LEFT-RIGHT-TOP-BOTTOM-UNIVERSAL) d 40 mm - 6000 rpm, short infeed table, NC-control unit to adjust machine parameters + PINOMATIC INFEEDER (automatic) infeed cross conveyor + SACOT CP 3 AUTOMATIC STACKER to stack pieces to pallet. Max. feeding lenght of timber via cross conveyor ab. 2,5 m and max. stackable length with SACOT ab. 2,0 m - longer pieces can be feeded manually and taken out manually. Price is ex works - dismounting and loading to t... more
Number of spindles 7 St.
Working width 230 mm
Working height 120 mm
Length of the planing table 2000 mm
Feed motor 3 kW
Feed speed 5-24 m/min.
Dimensions (L/W/H) 5200 x 2000 x 1900 mm
weight of the machine ca. 4500 kg
# 2545 Weinig Unimat 23 E with ATS control for width and height,
divide out of glazing bead possible
[...]
Technical data summary
(please inquire about additional accessories)
[...]
Generally
[...]
> Working width: 230 mm
> Working height: 120 mm
> Number of spindles: 7 pcs.
>... more
1988
used
Number of spindles:4 St.
Working width:220 mm
Working height:100 mm
Bhxomu2hy3
Length of the planing table:2000 mm
Feed motor:2,2 kW
Feed speed:5-22mtr. stufenlos m/min.
total power requirement:21 kw
Dimensions (L/W/H):3500x1500x1600 mm
weight of the machine ca.:2000 kg more
new
- Hobelbreite 20 - 230 mm
- Hobelhöhe 8 - 160 mm
C09i93eau
- 7 Spindeln (6+1)
- Spindel FI 40 mm
- Drehzahl 6000 U/min
- Vorschubgeschwindigkeit stufenlos 5 - 30 m/min
- Abrichtwelle, unten max. Werkzeug FI 145 mm
- Rechte Vertikalwelle max. Werkzeug FI 200 mm
- Linke Vertikalwelle max. Werkzeug FI 200 mm
- Dickenwelle, oben max. Werkzeug FI 200 mm
- Zweite obere Welle max. Werkzeug FI 200 mm
- Zweite untere Welle max. Werkzeug FI 200 mm
- Universalspindel max. Werkzeug FI 180 mm
m... more
Four-sided planer Guilliet KXR
number of spindles 4
Working width 230 mm
Working height 140 mm
spindle 1:horizontal lower engine power 5.5 kw
2/3 spindles: vertical motor power 7.5 kw
spindle 4: horizontal upper engine power 5.5 kw
Feed rate continuously adjustable between 5-33m/min
fully adjustable spindles
pneumatic clamps
Hhdbj88fu
drawer roller
the dimensions of the machine: 3700x1600x1500h mm
year of manufacture 1993 more
TECHNICAL SPECIFICATION WACO TYPE 2000 FOUR-SIDED PLANTER
- max planing width 225 mm
- max planing height 100 mm
- The minimum board thickness is 6 mm
- The planer has 6 spindles
- 5 motors - 18kW and one 55kW blade cutting motor
- feed speed 80m / min
St27wg
- diameter of spindles 45 mm
- spindle speed 5000 rpm more
Plane size max. 180 x 120 mm
Dzv0eo3j
min. 25 x 7 mm
Length of feeding table: 1700
spindle diameter: 40 mm
Cutter heads diameter: 125 mm
jointing cutter: 145 mm
Feed rate 7 + 14 m/min.
motors: 2 x 4 kW, 2 x 5,5 kW
Weight: 1.000 kg
incl.
lubricant pump
Indexable insert cutter heads
Strip Planer Cutter Heads
Suction bell more
ID000260Planer Jonsered H45BManufacturer: Jonsered,Model: H45B,Speed: 0 - 80 m/min,Heads: 7,Dimensions: 150 x 300 mm,Description: With electric box and hydraulic you need more information about the equipment, please contact our manager.
Ykln230x more
new
Technische Daten: - Hobelbreite 20 - 230 mm
- Hobelhöhe 8 - 160 mm
- 5 Spindeln
- Spindel FI 40 mm
- Drehzahl 6000 U/min
- Vorschubgeschwindigkeit stufenlos 5 - 30 m/min
- Abrichtwelle, unten max. Werkzeug FI 145 mm
- Rechte Vertikalwelle max. Werkzeug FI 200 mm
- Linke Vertikalwelle max. Werkzeug FI 200 mm
- Dickenwelle, oben max. Werkzeug FI 200 mm
- 2. untere Welle max. Werkzeug FI 200 mm
Spindelfolge: 1. unten 7,5 kW
2. rechte vertikal 5,5 kW
3. linke vertikal 5,5 kW als Mobilspindel
zu... more
SCM Compact 23K Super Foursided planer
Description:
Infeed table length 2000mm
Max. Working width 230mm
Max. Working height 120mm
Feed speed 6-12 mtr / min
Spindle speed 6,000 rpm
Min diameter profiling tools 100mm
Max. Diameter of profiling tools 180mm
Clamping length vertical spindles 140mm
Clamping length of horizontal spindles 253mm
Axial adjustment of the tool holder spindles 25mm
1732 kg
400Volt 50Hz
CE
(All changes, mistakes in technical data, info and prices reserved. Availability subj... more
1988
excellent (used)
CATALOG NUMBER 5891
TECHNICAL DATA
- max width of the workpiece 220mm
- max height of the workpiece 130mm
- 5 spindles:
1) horizontal bottom 220mm 5.5kW
2) vertical right 130mm
3) vertical left 130mm; 2 and 3 5.5kW
4) horizontal upper 220mm 5.5kW
5) horizontal bottom 220mm 4kW
- all adjustable spindles up / down, right / left
- diameter of spindles 40mm
- from above, 4 introductory, drawing rollers, including 1 double
Bloggn9t07
- from the top 1 pulling roller, smooth, rubber
- at the bottom, a... more
Weinig 6-head
uh, spindles:
H2mb3b2
down - left - right - up - down - left
spindle number 6
width of the planer ca. 160 mm
Planer height ca. 120 mm
table length ca. 2000 mm
table greasing
feed rate
from 6 to 18 m/min. more
working width: 180 mm
working height: 120 mm
working spindles: 4
spindle following: down, right, left, up
motor power spindle down: 3,7 kW
motor power spindle right: 3,7 kW
motor power spindle left: 3,7 kW
motor power spindle up: 5,5 kW
adjustment spindle down: -
adjustment spindle right: -
adjustment spindle left: electric, mobile spindle
adjustment spindle up: electric
cutter heads: turn cutter
feed speed: 2
feed pressure: feather
current consumption: 38 A
motor brake: automati... more
ID000259Planer Jonsered H45KNManufacturer: Jonsered,Model: H45KN,Speed: 0 - 80 m/min,Heads: 6,Dimensions: 150 x 300 mm,Description: With electric box and hydraulic station. If you need more information about the equipment, please contact our manager.
Bwvlkch more
new
- Hobelbreite 20 - 230 mm
- Hobelhöhe 20 - 200 mm
- Sägebreite 60 - 190 mm
- max. 5 Sägeblätter pro Sägewelle
- min. Sägedicke 5 mm
- 6 Spindeln
- Spindel Hobelwellen FI 40 mm
- Spindel Sägewellen FI 50 mm
- Drehzahl Hobelwellen 6000 U/min
- Drehzahl Sägewellen 6000 U/min
- Vorschubgeschwindigkeit stufenlos 5 - 30 m/min
- Abrichtwelle, unten max. Werkzeug FI 110 - 145 mm
- Rechte Vertikalwelle max. Werkzeug FI 110 - 200 mm
- Linke Vertikalwelle max. Werkzeug FI 110 - 200 mm
- Dickenwelle, oben m... more
Very neat machine. Year of construction 2002. First owner. Machine was regularly lubricated with entry. Did not go much because it was only used for one series of orders. Accessory trolley is also included. 2. Milling head for the last upper spindle is also included. We used it to bevel the edges at the same time. At the back of the workpiece exit there are a few quirks in the sheet metal from opening the spindle. Purely optical thing.
Machine is still connected in operation for about 3 weeks an... more
- NEW -
GENERAL CHARACTERISTICS
Machine bed
Machine bed made of solid steel with generously dimensioned reinforcing ribs and load-bearing hollow body construction.
Worktables
Inlet table made of tubular steel with height adjustment using a parallelogram system. Worktables made from low-friction and highly wear-resistant special castings that have interchangeable inserts in front of the vertical spindles.
guides
Right inlet guide with cross adjustment via parallelogram system
with joint seam ... more
2002
used
4-sided planing machineBrand: WeinigType: P 26 SYear: 2002 Working width 20 - 230 mm max. working height 120 mm Feed rate 5 - 24 m/min. Spindle arrangement: spindle 1 - bottom - 5,5 kW spindle 2 - right - 7,5 kW spindle 3 - left - drive together with right spindle spindle 4 - top - 7,5 kW spindle 5 - bottom - 4 kW Further equipment details: * pneumatic pressure in front of dressing spindle (infeed roller) * Table top with wooden inlay on the spindle on top * Insert segment spindle right for... more
ID000588Planer Waco 225/3000Manufacturer: Waco,Model: 3000,Speed: 0 - 150 m/min,Heads: 7,Planing height: 100 mm,Description: With electric box, frequency controlled you need more information about the equipment, please contact our manager.
Blqgrpljw0 more
new
- Hobelbreite 50 - 400 mm
Fq2m2er
- Hobelhöhe 10 - 300 mm
- stufenloser Vorschub 5-25 m/min.
- Spindel FI 50 mm
- Drehzahl 6000 U/min
- 6 Spindeln
- untere Welle min. / max. Werkzeug FI 160 /180 mm
- rechte Welle min. / max. Werkzeug FI 160 /230 mm
- linke Welle min. / max. Werkzeug FI 160 /230 mm
- obere Welle min. / max. Werkzeug FI 160 /230 mm
- 2. obere Welle min. / max. Werkzeug FI 160 /230 mm
- untere Welle min. / max. Werkzeug FI 160 /230 mm
-max. Sägeblattdurchmesser 2. obere... more
used
Number of spindles 9 St.
Working width 230 mm
Working height 140 mm
! Machine in order for sale !
SCM Topset 23 Version 32U
Number of spindles: 9 pcs.
Reinforced motors: 7.5 instead of 5.5 kW
Spindle assembly:
Dressing spindle / 2 x right / 2 x left / 2 x upper / 1 lower u.
1 glass bead saw
Benqjguabs
8 + 9 Sp horizontally adjustable via axis control, 9 sp (on / off, up / down)
Strip system automatic 3 u. 9 sp.
Horizontal spindles with axis control up / down (mass adjustment)
Vertical ... more
used, top condition, top equipment
manufactured by: Gubisch
type: B 230
built in: 1993
Masch.-No.: 15229
number of spindles: 5
80uith
spindle alignment: U - Re - Li - O - Uni
motors kW: 4,0 / 5,5 / 4,0 / 5,5 / 4,0
planing width ca. mm: max. 230 15 min
planing height ca. mm: max. 140 6 min
spindle diameter mm: 40
cardan feeder: Ja
pneumatic contact pressure der rolls: Ja
lateral Rollenandruck: Ja
protective hood / full covering: Ja
table lubrication Gleitmittelpumpe: Ja
feeder vor der surface pla... more
used
Reversible blade system,
electrical height adjustment,
dust tested
----- Technical data -----
Plane width: 180 mm,
Bjd0jsmvzj
Plane height: 120 mm,
Number of spindles: 4 pieces,
Feed speeds: 2 pieces,
Suction connection Ø: 150, 120, 120, 140 mm,
Dimensions (LxWxH): 3,300 x 1,400 x 1,400 mm more
CATALOG NO. 4472
TECHNICAL DATA
- max. Workpiece width 260mm
- max height of workpiece 130mm
5 spindles:
1) Horizontal bottom 260mm 5.5kW
G3ubni9zs
2) vertical right 130mm
3) vertical left 130mm (2i3) 5.5kW
4) horizontal upper 260mm 5.5kW
5) horizontal lower 260mm 5.5kW
- All heads are adjustable up / down, right / left
- diameter of spindles 40mm
- 4 in. Rollers, pulling, toothed, including 2 double
- from the top pulling shaft pulling, rubber double
- bottom pulling rubber pulling roller
- fe... more
ID000584Planer Waco HM200XManufacturer: Waco,Model: HM200X,Speed: 0 - 80 m/min,Heads: 7,Planing height: 100 mm,Description: With electric box and hydraulic you need more information about the equipment, please contact our manager.
Bbmih9pa more
new
- max. Hobelbreite 180 mm
- max. Hobelhöhe 105 mm
- min. Hobelbreite 25 mm
- min. Hobelhöhe 10 mm
- Arbeitshöhe 920 mm
- min. Werkstücklänge bei Einzelelementen 350 mm
- min. Werkstücklänge bei Serie 250 mm
- Aufgabetischlänge 1700 mm
- Spindeldurchmesser 40 mm
- Durchmesser der Hobelköpfe 120 mm
- Länge horizontale Spindel 190 mm
- Länge vertikale Spindel 120 mm
- Fügefalzfräser 140 x 10 x 40 mm
- Drehzahl 6000 Upm.
Bhhehcv0qy
Spindelfolge:
1. unten horizontal 4,0 kW
2. rechte vertikal 4,... more
SCM Compact 22S 4-sided moulding machine
- 120 x 230 mm working dimensions
- spindle diameter Ø 40 mm
Blthawprgr
- with universel spindle
- spindle order :
- - bottom
- - right
- - left
- - top
- - universel
- 2500 mm in-feed table
- feeding speed 5 - 20 m/min
- with pneumatic top pressure
- Ø 120 mm feeding rollers more
used, good condition, hardly gelaufen
manufactured by Guilliet
built in 1989
Masch.-No. 1902
GS-approved
number of spindles 4
motors 3,7/3,7/3,7/5,5 kW
Motorbremsen
planing width ca. 180 mm
planing height ca. 120 mm
spindle diameter 30 mm
cutter system Brück turncutter
Vorfügefräser
cardan feeder
protective hood
feed speed 2 pc 6 + 12 m/min.
sliding rolls 1 piece im sliding shelf driven
electrical adjustment height
digital displays 2
Bjnes8yygg
exhaust connection D 120/120/140/160 mm
required ... more
Number of spindles 6 St.
Working width 250 mm
Working height 160 mm
Length of the planing table 2500 mm
Feed motor 4 kW
Cygn2k3gq
Feed speed 24 m/min.
total power requirement 52 kw
Dimensions (L/W/H) 4800 x 1900 x 2150 mm
weight of the machine ca. 5400 kg
Control Powercontrol, Powertouch more
Beschreibung : Rückführung für Vierseitenhobelmaschine
- Werkstücklänge 200 - 1100 mm
- Werkstückbreite 20 - 150 mm
- Werkstückstärke 5 - 80 mm
- Bandlänge 3000 mm
- Bandbreite 250 mm
- Bandgeschwindigkeit 20 - 100 m / min.
- Antriebsmotor 0,25 kW
9337dep
- Pneumatischer Druck 6 bar
- E. - Anschluss 400 V / 50 Hz / 1,1 A
Lagerort: Nattheim more
Planer Waco HM200 UniversalManufacturer: Waco,Model: HM200 Universal,Speed: 0 - 60 m/min,Heads: 7,Planing dimensions: 100x200 mm,Description: With electric you need more information about the equipment, please contact our manager.
Odfc7 more