Used Step Four for sale (5,974)

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Bedpfx Akezhhl Ijneww Two staircases can be mounted on top of each other. Half-turn staircase, left + right. A complete staircase can be stored on a Euro pallet.

Condition: used, functionality: unexamined, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 130 mm, total length: 3,070 mm, table length: 2,800 mm, table width: 1,340 mm, total width: 1,800 mm, spindle speed (max.): 30,000 rpm, total height: 1,420 mm, overall weight: 500 kg, spindle motor power: 2,200 W, controller manufacturer: CNC-STEP (KinetiC-NC), number of axes: 3, Equipment: documentation/manual, We are selling our CNC portal milling machine, CNC-STEP High-Z T-Rex S-1224, with extensive equipment. The machine was purchased new in 2019 (total investment approximately €39,900 net) and is suitable for milling and engraving aluminum, plastic, and wood. Bedpfs Af Ifzox Akneww Condition: The machine is generally functional. However, after being transported to its current location, it has not been fully reassembled and connected, so its functionality cannot currently be tested. An inspection is possible, but a test run under power is not. Technical data: - Travel distances: X 2,400 mm / Y 1,200 mm / Z 130 mm - Clamping area: 2,800 x 1,340 mm - Drive: 3 brushless stepper motors, ball screw spindles on all axes - Linear guides HIWIN/THK on all axes - Rapid traverse max. approx. 12,000 mm/min, working speed max. approx. 8,000 mm/min - Repeatability approx. 0.01 mm - Overall dimensions approx. 3,070 x 1,800 x 1,420 mm, weight approx. 500 kg Equipment: - High-frequency spindle Mechatron ATC-8022-30: 2.2 kW, 30,000 rpm, HSK25/ER16, pneumatic, with control cabinet and frequency inverter - 5 tool holders HSK-E-25-ER16, collet set ER16 - Tool length sensor - Vacuum table covering the entire area (MDF), 2 side channel blowers each 4 kW (high voltage) - Minimum quantity lubrication - T-slot table - KinetiC-NC control system with wireless remote control, emergency stop - Control laptop (ASUS) included - CAM software VCarve Pro - Operating manuals and wiring diagrams Without automatic tool changer. Notes: - Inspection possible by arrangement (not under power) - Disassembly and transport by the buyer, we will assist with the forklift during loading - Sale excludes any warranty - Invoice with VAT shown

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for Bwodpszu T Smjfx Aknsw S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 88.961, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 10, planing height: 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 10 1st planing axis: 260 mm Spindle 1 Position: Bottom Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 2 Position: Right Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 3 Position: Left Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 4 Position: Right Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 5 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 6 Position: Bottom Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 7 Bwedj Af Hgvopfx Aknsw Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 8 Position: Bottom Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 9 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 10 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Planing width: min. 10 mm Planing width: max. 230 mm Planing height: max. 120 mm Infeed table length: 1,975 mm Diameter of feed rollers: 140 mm Conveyor motor power: 5.5 kW Conveyor drive: Cardan drive Feed speed: min. 4 m/min Feed speed: max. 24 m/min Feed speed control: Stepless MACHINE DETAILS Diameter of extraction nozzle: 140 mm Lubrication system: Manual Voltage: 380 V Current consumption: 189 A Fuse rating: 200 A Power: 80 kW Dimensions & Weight Dimensions (L x W x H): 7,100 x 2,100 x 2,200 mm Weight: 6,000 kg Number of transport packages: 1 EQUIPMENT Documentation CE marking

Condition: good (used), Uchida Durselen UD-04 four-head paper drill The unit is in perfect, like-new condition! This is the latest, currently manufactured model. Made in Japan. The machine features a range of functions designed for ease of operation, including: – infinitely variable drill rotation speed, controlled via an inverter (VFD) – four drilling heads with independently adjustable positions – a sliding table equipped with a programming bar – spacers for simple setup when drilling holes at standard intervals for A4 and A5 formats – casters for easy mobility Technical specifications: Drill diameter: 2–10 mm Bedpfx Akez S Uluonsww Stack height: 50 mm Distance between heads: 45 mm – 380 mm Weight: 200 kg Power supply: 230V Automatic drilling cycle, operated via a foot pedal. Robust, pedestal-mounted construction. Waste directed into an external collection bin. Drill table adjustable in all planes, with front and side margin settings. Includes maintenance tools, a new drill block (cutting stick), and drill bits.

Condition: used, Technical specifications: Bedpfs Ah Elnjx Aknsww Max. planing width: 180 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom, right, left, top Number of steel upper feed rollers: 3 Smooth feed rate adjustment Feed mechanism: via universal joints Power supply: 400 V Total power: 16 kW Overall dimensions: Length: 3150 mm Width: 1100 mm Height: 1450 mm

Condition: used, Year of construction: 2013, machine/vehicle number: 1584.18, functionality: fully functional, pressing force: 160 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,000 mm, total width: 3,200 mm, total height: 5,000 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 160 T. The machine has a table size of 2,000 × 1,400 mm, a maximum installation height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, upsetting, and assembly operations in industrial applications. ##### Technical data + information: Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm ==== General information - Reference ID: TPT-06 - Manufacturer: HYMAG - Design: Four-column press - Model: HS 4-160 K - Machine number: 1584.18 - Year of manufacture: 2013 - Pressing force: 160 T - Rated force: 1,600 kN - Table size (working area): 2,000 × 1,400 mm - Plunger plate size: 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,200 mm - Stroke: 700 mm - Front clearance: 2,010 mm - Side clearance: 900 mm - Overall height: 5,000 mm - Overall width: 3,200 mm - Overall depth: 2,000 mm - Total weight: 28 T - Basement required: no ==== Hydraulic cylinder - Stroke: 700 mm - Max. working pressure: 305 bar - Return speed (downward): 220 mm/s - Return speed (upward): 150 mm/s - Pressing speed: 45 mm/s ==== Hydraulics & Drive - Main motor: 55 kW - Additional hydraulics: 7.5 kW - Oil tank: 500 l - Hydraulic oil: ISO VG 46 - Pump type, main unit: V30D-115-RKN - Pump type, additional hydraulics: PGH4-2X/025 - Oil-air cooler: TFS/A-20-400 - Stepless pressure control via proportional valves - Stepless speed control via proportional valves - Actual pressure display in the PLC - Quick traverse cylinder with after-suction/locking valve - Oil-air cooler with its own circulation pump (45/75 °C) - Additional hydraulics: 130 bar - 2 double-acting tool cylinders - Tool cylinder speed: approx. 50 mm/s at Ø 100 mm ==== Tooling - T-slots: 9 - T-slot design: M20 according to DIN 650 ==== Control system - Control: Siemens SIMATIC C7 - Control panel: on the frame - Stepless pressure control - Stepless speed control ==== Safety - Light curtain/light barrier: available - Two-hand operation: available - Safety control: available - CE-compliant design - Dwell time: 70 ms - Dwell travel: 118 mm ==== Electrical connection - Operating voltage: 400 V - Main motor current consumption: 105 A - Main motor speed: 1,450 rpm - Additional hydraulics voltage: 400 V Bwodpfxe Adz Ule Aknew - Additional hydraulics power: 7.5 kW - Additional hydraulics current consumption: 15 A - Cooling motor power: 1.5 kW - Cooling motor voltage: 400 V - Cooling motor current consumption: 5.1 A ##### Application areas: Forming, deep drawing, straightening, upsetting, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-column press, four-column press, 4-column press, hydraulic press, HYMAG, HYMAG HS 4-160 K, 160 T press, 160 ton press, forming press, deep drawing press, straightening press, upsetting press, assembly press, industrial press)

Condition: used, total width: 2,100 mm, total height: 2,400 mm, Year of manufacture: 2002 Colour: Blue Empty weight: 3.000 kg Dimensions (LxBxH): 410 x 210 x 240 cm Price: On request - Details: - └ Description: Needs repair - Year: 2002 - CE marking present: Yes - Serial number: 96164 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top Bsdpfx As Ahx Tqoknsww - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: No - └ Spindle 5: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - Feed table length [mm]: 945 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 14 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Fuse [A]: 63 - Transport dimensions: 4100mm x 2100mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, machine/vehicle number: 845, functionality: fully functional, pressing force: 106 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 650 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN with a maximum pressing force of 106 T. The machine has a table size of 1,700 × 1,200 mm, an open height of 1,450 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, inserting, and assembly work in industrial applications. ##### Technical data + information: Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm ==== General information - Reference ID: TPT-09 - Manufacturer: ALN - Type: Hydraulic 4-column stamping press - Model: 4 SPY 60 SO - Machine number: 845 - Year of construction: 1998 - Pressing force: 106 T Bodpj Ad H S Ajfx Aknjww - Table size (usable area): 1,700 × 1,200 mm - Table height: 650 mm - Open height: 1,450 mm - Stroke: 1,000 mm - Overall height: 3,992 mm - Overall width: 2,645 mm - Overall depth: 1,965 mm - Total weight: 12.5 T - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 243 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s ==== Hydraulics & drive - Main motor: 25 kW - Oil tank: 650 l ==== Safety and equipment - Slug damping: yes - Maintenance platform: no ==== Documentation - Hydraulic diagram - Electrical diagram - Operating manual ##### Application areas: Stamping, forming, straightening, inserting, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic 4-column stamping press, 4-column stamping press, hydraulic press, ALN press, 4 SPY 60 SO, 106 T press, 106-ton press, forming press, stamping press, straightening press, inserting press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of custom machines and press automation. We distribute tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: used, Year of construction: 2008, machine/vehicle number: 1540.18, functionality: fully functional, pressing force: 160 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,000 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 160 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, insert molding, and assembly operations in industrial applications. ##### Technical data + information: Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm Bwodpj Adtl Ajfx Aknjw ==== General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4-160K - Machine number: 1540.18 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,200 mm - Stroke: 700 mm - Overall height: 5,000 mm - Overall width: 3,200 mm - Overall depth: 2,000 mm - Overall weight: 28 T - Basement required: no ==== Hydraulic cylinder - Stroke: 700 mm - Max. working pressure: 280 bar - Return speed downwards: 220 mm/s - Return speed upwards: 150 mm/s - Initial pressing speed: 45 mm/s ==== Hydraulics & drive - Main motor: 55 kW - Auxiliary hydraulics: 7.5 kW - Oil tank: 600 l - Pneumatic pressure accumulator: yes ==== Control - Control: SIEMENS SIMATIC C7 - Control panel: pendant control panel - Two-hand operation ==== Safety - Blanking force limitation - Maintenance platform - Emergency stop - Light curtain / light barrier - Protective grating - Separate control cabinet ##### Application areas: Forming, deep drawing, straightening, insert molding, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-column press, 4-column press, hydraulic press, HYMAG, HYMAG HS 4-160K, 160 T press, 160 ton press, forming press, deep-drawing press, straightening press, insert molding press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all points of the national Brazilian safety guideline NR 12, which is based on them. Our core strength lies in the design and construction of custom-made machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 1998, machine/vehicle number: 844, functionality: fully functional, pressing force: 61 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 640 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN August Luigart & Sohn GmbH & Co. KG with a maximum pressing force of 61 tons. The machine has a table size of 1,700 × 1,200 mm, a maximum installation height of 1,350 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm ==== General Information - Manufacturer: ALN August Luigart & Sohn GmbH & Co. KG - Type: Oil-hydraulic 4-column stamping press - Model: 4 SPy 60 SO - Machine number: 844 - Year of manufacture: 1998 - Pressing force: 61 T - Rated force: 600 kN - Table size (working area): 1,700 × 1,200 mm - Ram plate size: 1,700 × 1,200 mm - Table height: 640 mm - Open height: 1,450 mm - Installation height: 1,350 mm - Stroke: 1,000 mm - Front opening: 1,700 mm - Side opening: 850 mm - Installation width front/rear: 1,700 mm - Installation width side: 850 mm - Tool upper part weight max.: 1,200 kg - Total height: 3,992 mm - Total width: 2,645 mm - Total depth: 1,965 mm - Total weight: 12 T - Basement required: no ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 180 mm - Piston rod diameter: Ø 160 mm - Guide column diameter: Ø 125 mm - Stroke: 1,000 mm Bedpfs Adrzcjx Akneww - Max. working pressure: 236 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s - Setup speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 25 kW - Oil tank: 650 l - Oil type: HLP ISO VG 46 - Oil filter fineness: < 25 µm - Operating temperature max.: 60 °C - Pneumatic pressure accumulator: yes ==== Tooling - T-slots: 5 - T-slots according to DIN 650 / T22 M20 ==== Control System - Control: SIEMENS SIMATIC Touch Panel - Control panel: on the frame - Two-hand operation - Valve voltage: 24 V DC - Control voltage: 230 V AC ==== Safety - Stroke end damping - Follow-up stroke: 26 mm - Follow-up time: 113 ms - Safety distance: 228 mm - Emergency stop - Light curtain / light barrier - Protective grid - Separate control cabinet - Maintenance platform: no ==== Electrical Connection - Operating voltage: 415 V - Frequency: 50 Hz - Power supply: 3PEN - Connection cable: 16 mm² - Fuse: 63 A - Main motor current consumption: 48 A - Noise level: < 70 dB(A) ##### Application areas: Stamping, forming, straightening, press-fitting, assembly operations, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic stamping press, 4-column stamping press, oil-hydraulic stamping press, hydraulic press, hydraulic press, ALN press, August Luigart press, 4 SPy 60 SO, 61 T press, 61-ton press, forming press, stamping press, straightening press, assembly press, industrial press)

Condition: used, total width: 2,100 mm, total height: 2,100 mm, Year of manufacture: 2000 Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 370 x 210 x 210 cm - Details: - └ Description: Various repairs are needed - Year: 2000 - CE marking present: Yes - Serial number: 30728 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: Bodpfx Akoz Tqznoneww - - Spindle type: Left - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Tool present: Yes - └ Spindle 5: - - Spindle type: Top - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Tool present: Yes - Max. planing width [mm]: 260 - Min. planing height [mm]: 0 - Max. planing height [mm]: 140 - Feed table length [mm]: 860 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 141 - Fuse [A]: 160 - Power [kW]: 65.0 - Transport dimensions: 3700mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, 8 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 60/72/H47 mm Bwsdozpwuhepfx Aknow -Total weight: 1.4 kg/set

Condition: used, Technical specifications: Bodpj Ahyccofx Akneww Filter bag diameter: 48 x 200 mm Collection bag diameter: 4 x 600 mm Dust extraction nozzle: 350 mm Power supply: 400 V Motor speed: 2880 rpm Motor power: 7.5 kW Overall dimensions: Length: 3500 mm Width: 1100 mm Height: 3800 mm

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Bsdpex I Ehpefx Aknoww Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle diameter: 40 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, input voltage: 400 V, number of spindles: 5, table width: 230 mm, Equipment: motor brake, The machine was installed at the plant in 2024. The planer was purchased by us as new and installed at the plant in January 2024. Due to a change in the technological requirements of our production, it was replaced with a different model. The reason for the sale is a change in the plant’s needs. The machine is in very good technical condition and ready for operation. Bjdpjz Rz Hvjfx Akneww

Condition: good (used), Year of construction: 1981, pressure 300 t Bedpsx Uru Njfx Akneww passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: used, total width: 1,650 mm, total height: 1,750 mm, Year of manufacture: 2013 Colour: White Empty weight: 2.600 kg Dimensions (LxBxH): 415 x 165 x 175 cm - Year: 2013 - Documentation available: Yes - CE marking present: Yes - Serial number: AB - 216795 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 9 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 Bodpfx Akszwuh Ijnjww - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 140 - Min. planing width [mm]: 25 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 120 - Options: Powered rollers in table - Feed speed: Automatic - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 25 - └ Feed speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 57 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 4150mm x 1650mm x 1750mm (l x w x h) - Transport weight [kg]: 2600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Bjdpfx Akoz S H U Usnjww Pressing force: 3.000 kN Maximum slide stroke: 1.20 mm Table size: 2.050 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum distance from mounting surface to slide: 1.350 mm Minimum shut height: 250 mm Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 180.1001, functionality: fully functional, input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, We are offering this very well-maintained Hoffmann + Kuhnheinrich 180 four-sided planer, year of manufacture 1997. Manufacturer: Hoffmann + Kuhnheinrich GmbH Machine type: 180 Bjdpfx Aey D Nc Noknjww Year of manufacture: 1997 Machine no.: 180.1001 Voltage: 380 V Rated current: 32 A Frequency: 50 Hz If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Bwedpszw E Ilefx Aknew -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H85 mm -Total weight: 10.1 kg

Condition: used, total width: 1,700 mm, total height: 1,650 mm, Year of manufacture: 1996 Colour: Grey Empty weight: 2.500 kg Dimensions (LxBxH): 400 x 170 x 165 cm - Year: 1996 - Documentation available: Yes - Serial number: 123-2001 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 150 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Vertical spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 140 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Vertical spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 Bwsdpjzuayqsfx Aknew - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 140 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - Max. planing width [mm]: 260 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 380 - Current consumption [A]: 84 - Fuse [A]: 100 - Power [kW]: 39.0 - Transport dimensions: 4000mm x 1700mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, functionality: fully functional, 6 heads, good, working condition, FREUD tool set Bwjdpfxsz Tymmj Aknow

Condition: used, total width: 2,600 mm, total height: 1,900 mm, Year of manufacture: 1998 Colour: White Empty weight: 6.500 kg Dimensions (LxBxH): 590 x 260 x 190 cm - Details: - └ Description: Gas springs are weak - Year: 1998 - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - Min. planing width [mm]: 15 - Max. planing width [mm]: 230 - Min. planing height [mm]: 10 - Max. planing height [mm]: 150 - Feed table length [mm]: 1570 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.5 - Conveyor drive: Cardan drive Bedpfxjxlthio Aknjww - Diameter extraction nozzle [mm]: 120 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 24 - └ Feed speed control: Incremental - Transport dimensions: 5900mm x 2600mm x 1900mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1990, with single spindle gas spring protection cover renewed completely adjusted used good condition cleaned function tested Manufacturer: Guilliet Type: KXR Year of manufacture: 1990 Machine no.: 1193 Number of spindles: 5 Spindle arrangement: u - re - li - o - uni Pre-milling cutter Cardan feed pneumatic roller pressure lateral roller pressure protection cover / complete enclosure infeed before the planing unit feed speed / piece, continuously variable / m/min: 4.5 - 27 Bwedpfx Ae Ahr Ayjknow electric adjustment of thickness roller digital displays: complete incl. profiling motors kW: 5.5 - 7.5 right + left - 5.5 - 5.5 planing width approx. mm: 30 - 220 planing height approx. mm: 6 - 120 spindle diameter mm: 40 table length approx. mm: 2000 extraction connection mm: 2x120 2x160 space requirement approx. L x W x H mm: 3800x2000x1600 weight approx. kg: 1800 Location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected, without guarantee and warranty