Used 4 Side Planer for sale (29,508)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg Itjdpfx Asfdkb Tjfisn - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Isdpeg S Dm Nsfx Afistn

Condition: ready for operation (used), functionality: fully functional, 4 printing units 12 " Itjdpfx Afewhqnzeijn water cooling unit 2 perforated units It is in good condition in production

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm Itjdoi Apuhepfx Afijn - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Itedoif Upfepfx Afijn Manufactured new to order Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models

Condition: good (used), 4 x Bonfiglioli wind turbine gearbox JB00001227 SN B6201603697 Ijdpfx Aowg E Utofiotn

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Isdpfxsfdkb Uo Afistn According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2020, 1. WEISCHAUPT WM-G10/4-A (with gas line) - Power: 100-1100 kW - Model: ZM-LN - Year of manufacture: 2020 2. Iedpfxjwgyrtj Afiotn WEISCHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM - Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, machine/vehicle number: 320.04.001.21, travel distance X-axis: 5,230 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece height (max.): 105 mm, overall weight: 4,100 kg, FOR SALE: FELDER FORMAT 4 CNC + FELDER RL 350 extraction system including piping and tools (milling cutters) FELDER FORMAT 4 • Type: Profit H10 22 43 c-tech • Serial number: 320.04.001.21 • Year of manufacture: 2021 • Operating hours: 121 hours • Safety system with safety mats • Mobile control panel with screen, keyboard, and mouse • 2 vacuum pumps as standard, each with a nominal capacity of 250 m³ + a special version with a third extraction pump to ensure maximum cleanliness during milling • 8-position tool changer FELDER RL 350 extraction system including piping • 3 x 400V 50Hz 15HP 11kW • Maximum flow rate: 8000 m³/h • Nominal flow rate: 20 m/sec, 6920 m³/h • Negative pressure: 2630 Pa Itsdswc R D Espfx Afien • Filter area: 71 m² • Extraction connection diameter: 350 mm • Residual dust content:

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Itedpfx Afov Ukz Aoisn Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Itsdevuphujpfx Afien Funnel opening: length x width 1250x1000 mm Length x width 1250 x1000 mm Cutting unit opening: Length x width 562x462 mm Number of shafts: 4 of which: cutting shafts 2 Number of cutting discs: 23 Speed of the shafts: 25 rpm.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Itodpfofdkbhox Afion - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Iodpfx Asd Tbbdefiotn The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Itedoguk Dkopfx Afisn - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Itedpfx Afjguk Dveien - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Itodpfx Afjguk A Hoijn Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: excellent (used), functionality: fully functional, Brehmer Polygraph 39-3/4 thread sewing machine for bookbinding. Includes extensive accessories and consumables. Machine is well-maintained and in very good condition. Comes with manual and complete documentation – very rare. Electrical connection 400V/50Hz. Itodpfx Afexa Afmeijn

Condition: ready for operation (used), Kessler DMQ .4.AFS main spindle motor SN:129850 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask separately for price,ATTENTION: Please ask separately for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Iedpfx Afei D Iy Esiotn

Year of construction: 1999, condition: ready for operation (used), - USED - MECHANIC GUILLOTTINE SHEAR WITH DRIVEN BACK GAUGE CUTTING LENGTH: 3050 mm MAX CUTTING THICKNESS: 4 mm THROAT DEPTH: 500 mm No OF PLATE HOLDERS: 17 WEIGHT: 7200 Kg Ijdomyc I Tepfx Afietn ACCESSORIES: DIGITAL READOUT SYSTEM

Condition: excellent (used), Year of construction: 2012, operating hours: 40,000 h, functionality: fully functional, Bar loader Robobar SBF-320 Commissioning: 22/06/2012 Powered hours: approx. 40,000 h Cutting time: 22,000 h (as of 02/2025) Itedsxph Hhepfx Afisn Number of axes: 4 Number of cross units: 3 pcs. (2 x ER11, 1 x ER16) Driven tools: 5 pcs., shank 12x12 (3 of them overhead) Front drilling holder: 4-fold Collets: 2 x type E136 Guide bushing: F605 The machine has operated exclusively with oil at our facility.

Condition: excellent (used), Type: ClimeEvent C/2700/70/4/W Weiss Technik ClimeEvent C/2700/70/4/W – High-Performance Climate Test Chamber For sale is a ClimeEvent C/2700/70/4/W climate test chamber, ideal for industrial, research, and development applications. Perfect for demanding temperature and climate testing of large components and assemblies. Technical specifications: - Internal dimensions (H x W x D): 1150 × 1990 × 1200 mm - External dimensions (H x W x D): 2250 × 3800 × 1555 mm - Test chamber volume: approx. 2760 l - Temperature range: –72 °C to +180 °C - Temperature change rate: 4 K/min (heating & cooling) - Temperature uniformity: ±1.0 K to ±1.5 K - Humidity range: 10% – 98% r.h., deviation ±1% – ±3% r.h. - Power consumption: 8000 W (heating/cooling) - Power supply: 500 V - Refrigerant: Eco-friendly R449A/R469A - Air management: Optimized supply and exhaust air regulation - ESD protection: Fully integrated - Software: Compatible with S!MPATI® for test control and documentation Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 33.0 kW - Rated current: 18.5 A - Test chamber volume: approx. 2760 liters - Weight: approx. 2000 kg Itedsxpg U Ropfx Afien For your safety as a buyer, please note the following! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certification 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) Further questions can be gladly answered by phone.

Year of construction: 1984, condition: good (used), burnt hydraulic guillotine shear, make LVD, type MVN 25 / 4, year 1984 Iodpfx Asihppxefietn power 2500 x 4 mm with backgauge with documentation Other accessories: - Conveyor table - Lifting table

Condition: good (used), mileage: 1,041,300 km, power: 405 kW (550.65 HP), first registration: 08/2018, fuel type: diesel, color: white, axle configuration: 8x2, fuel: diesel, wheelbase: 5,100 mm, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, = Additional Options and Accessories = - PTO (Power Take-Off) = Remarks = 1x Volvo FH540, 8x2*4, Transmission: I-Shift, Euro 6, Chassis (former tanker), ADR, 2018, 8,000 kg front axle, microwave, coffee machine, refrigerator, 2nd and 4th axles are steered and liftable, ABS, mileage: 1,041,300 km, first registration: 24.08.2018, year of manufacture: 08/2018, suspension: front leaf / rear air, Webasto heater, wheelbase between 1st and 2nd axles: 3780 mm, overall width: 2,550 mm, overall length: 10,100 mm, tires: front 385/55/22.5 (70%), rear 315/70/22.5 (50%), air conditioning, stereo system, electric windows, electric exterior mirrors, comfort driver's seat, heated driver's seat, roof spoiler, aluminum fuel tank, trailer coupling, valid technical inspection (TÜV), first owner! Last service at 992,900 km (05.05.2025) … The truck is in good and fully functional condition! Price: € Stockholm, Sweden For further information and photos, please contact us by phone or e-mail. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * .----- * Shipping costs for this truck to various destinations * -----. * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 Itedjxnxypspfx Afisn * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only when purchasing this truck. * -----. _____ _____ = Further Information = AdBlue system: Yes Cab: double Front axle 1: Max. axle load: 9,000 kg; steered; tire tread left: 60%; tire tread right: 60%; suspension: leaf spring Front axle 2: lift axle; max. axle load: 9,000 kg; steered; tire tread left: 60%; tire tread right: 60%; suspension: air suspension Rear axle 1: max. axle load: 10,500 kg; tire tread left: 80%; tire tread right: 80%; suspension: air suspension Rear axle 2: lift axle; max. axle load: 7,500 kg; steered; tire tread left: 60%; tire tread right: 60%; suspension: air suspension Engine displacement: 12,777 cc Technical condition: good Optical condition: good

Condition: new, Kessler DMQ .4.AFB motor, hole spacing of the mounting holes: 248 x 248 mm, Ø drive shaft: 55 mm, unused with traces of storage, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itedpsi D Iyzjfx Afijn

Condition: excellent (used), V. Bandsaw, manufactured by Elektra Beckum, type BAS 315/4 Year of manufacture: 1994 throat 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Itjdpfx Afjvbf Svoien Accessories: Saw bands, length stop, angle adjustment for miter cuts