Used 4 Axis Cnc Milling Machine for sale (95,430)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Hfodpfxsx Sw A To Ah Nsb Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine number: 016453-20.1 X-Travel: 7000 mm Y-Travel: 4000 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Max. Workpiece Weight: 20 t Table-Size (Lxw): 2.800 x 2.000 mm Table load max.: 18.000 kg Tool Taper: SK 50 Tool places: 360 Distance Between Columns: 3.200 x 4.000 mm Further information: - 4 milling heads available - 1 universal head - Pick Up Head Station The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Hodpfx Asx T Awxjh Njfb Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: used, Year of construction: 2002, x-travel 889 mm y-travel 495 mm Control Siemens spindle tunring speed 3.400 U/min table-size 254 x 1.371 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hedox Sr E Njpfx Ah Njfb Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, table width: 1,200 mm, table length: 4,500 mm, rotary table diameter: 1,250 mm, NC Rotary table 1250 mm with 50 Rpm Full C-Axis  360.000 with HIGH TORQ Drive HSK-100 with 90 kW and 15.000 Rpm 5 Axis simulteneous package Last service in 2023  X - Travel: 4000mm Y - Travel: 1200mm Z - Travel: 1300mm A - Axis: 105° B - Axis: 360000° Table Length: 4500mm Table Width: 1200mm Table Ø: 1250mm Spindle Taper: 100ISO/Bt/Mk Power on spindle: 90kW Speeds / ranges: 15000Rpm ATC / revolver: 60 Coolant through spindle / Bar:70 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 10500mm Hodpfx Ahex Sqf Is Nsfb Width: 4500mm Height: 4100mm Weight: 34000kg

Condition: used, Year of construction: 2014, Make: HANDTMANN, Model: HBZ Trunnion 80, Year of manufacture: 2014, Serial No. 200793, Control unit by Heidenhain, Type TNC640, Travel distances X/Y/Z: 850 x 850 x 700 mm, A-axis max. -30/+120°, C-axis 360°, Tool holder: HSK 63A, Max. workpiece size: Ø 850 x 630 mm, Max. workpiece weight: 1,200 kg, 40-position tool changer, NC rotary/swivel table, Table diameter: 800 mm, Maximum spindle speed: 30,000 rpm, Chip conveyor by Knoll, Model 600K-3, Band filter system by Knoll, Electrical cabinet by Knoll, Control defective, Travel paths: 850 x 850 x 700 mm Hedpfxox A U Uls Ah Nofb This machine is part of an online auction. Images will be provided later.

Condition: refurbished (used), Year of construction: 2002, Operating travels of the axes for the CERUTI 25 model X Axis: Working travel 10000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Y Axis: Working travel 2500 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Z Axis: Working travel 1000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. A Axis: Working travel +/- 95°. C Axis: Working travel +/- 200°. T Axis: Continuous travel. Operating speeds of linear axes X, Y, Z Axes: 20.000 mm/min. Axis accelerations X Axis: 1000 mm/sec². Y, Z Axes: 1000 mm/sec².Note: Accelerations may vary depending on the installed CNC type. Spindle Type: ISO 40, ISO 50, Electrospindle HSK A63. Power: 30 KW. Torque: 280 Nm. Maximum speed: 12.000 rpm. Mounted tool holder type Hfedjv D U Ifepfx Ah Njb HSK A63. Tool changer type S.G.M. Number of positions: 20, 30, 74. Max diameter for adjacent positions: 100 mm. Max diameter for non-adjacent positions: 200 mm. Maximum length: 300 mm. Maximum tool weight: 12 Kg. Tool change time: 20 sec. Technical data are subject to change without prior notice.      

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Hfjdpfjxxn Uksx Ah Neb Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, CB Ferrari B17 High Speed 5 Axis Milling Machine with 750mm Diameter C Axis Table, 22,000rpm Electro Spindle, CAT40 Spindle Taper, Machine Weight 78000kg. S/No. 98045. CE Mark Please Note: Dismantling and Loading will be carried out by our own supplier. A charge of €850 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item., alternatively, please notify Cottrill & Co if you would like to arrange your own dismantling and loading at a cost to yourselves. Hjdjx Tridepfx Ah Nsfb

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex location: CNC bed-type milling machine MTE Type: Kompakt Plus Year of manufacture: 2000 Heidenhain TNC 410 Table: 2200 x 750 mm Travel X/Y/Z: 2000/800/800 mm Table load capacity: 4 tons Spindle taper: SK 50 Hydraulic tool clamping Spindle speeds: 40 – 2500 rpm Spindle power: 15 kW Total power requirement: 30 kW Coolant system Weight: 12 tons Hfedpfx Aex Tq Acoh Neb Offered at a price of EUR 14,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Hodpfox Tpytsx Ah Nsfb

Condition: used, Year of construction: 2008, We are offering this used Lagun FTV 4 SP tool milling machine, year of manufacture 2008. Hfsdpfx Ahjx Tn S Uo Neb If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hjdpfx Asx R S Smsh Nefb

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Hfodjx R R Hcspfx Ah Neb Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Hfsdjwzx Ntjpfx Ah Nob Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.

Condition: ready for operation (used), Year of construction: 2000, Immediately available from toolmaking in Switzerland: 5-axis milling machine Deckel Maho Type: DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Hfsdpfxsx Tqzlo Ah Nsb Table load up to 100 kg Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servomotors for X/Y/Z axes Swivel range: 360° Table clamping: +105/–150° Weight: 2 t Tool holders, hydraulic vise Price: EUR 6,500 plus VAT ex works location.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 12,000 kg, table length: 4,100 mm, workpiece weight (max.): 12,000 kg, overall weight: 26,500 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems and handwheel) ICS: Internal coolant supply, 36 bar Additional Equipment: Drum-type tool changer with double gripper, 24 positions Hedjh Ekrzopfx Ah Nefb Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear 4th axis preparation (rotary table) Perimetric enclosure Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: good (used), Year of construction: 1971, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine -Manufacturer: Steinel, vertical milling machine type SV 4 -Clamping table: 740 x 200 mm Hsdpfx Aot E D D Ioh Njfb -Cross table: 620 x 130 mm -Travel: X/Y/Z 340/100/300 mm -Spindle holder: MK2 -Speed: 112 - 2240 rpm right/left rotation -Feed: 0.10 - 0.71 mm/min -Quill stroke: 100 mm -Coolant system -Dimensions: 1000/950/H1830 mm -Weight: 650 kg

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools Hfodpfxexcgtgj Ah Njb - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Hedpfx Ahox R R E So Nofb Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l Hfedpetvfpcjfx Ah Neb _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee.

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice Hfodpol Dvx Eefx Ah Njb 19 tool holders Coolant

Condition: excellent (used), Brand : SORALUCE Model : TR- 25 Cnc : HEINDENHAIN iTNC 530 Work table : 2860 x 1200 mm X Axis travel : 2500 mm Y Axis travel : 1600 mm Z Axis travel : 1200 mm Spindle speed: 20-3000 rpm Tool taper : ISO 50 Maximum torque : 700 Nrm Spindle motor : 32 kw Feed range : 2- 10 m/min Rapid traverse: 25 m/min Machine weight : 25 tn NC Rotary table (4th axis) YRT F 1000/1250 Maximum load: 3500 kg Overall height : 265 mm Table top thickness: 125 mm Partial accuracy : ±2,5 Equipped with: Electronica handwheel Automatic universal milling head: ±2,5° Cooling through the spindle Coolant device with paper band filter Hedex Rv D Hopfx Ah Nsfb Chip conveyor Working hours : Machine running: 34.320 h Control on: 23.218 h Automatic cycle: 11.987 h

Condition: new, Year of construction: 2025, CORMAK C2131 ATC PREMIUM (2100 x 3100 mm) is a dynamic and precise milling plotter based on components from world manufacturers, suitable for the heaviest tasks, which is perfect for industrial-scale production. Constant quality control and the components used in the machine's construction guarantee high quality processing of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, alucobond. 1. Work table Sectioning table with FOUR independent vacuum sections, made of stiff and durable HPL plates, Each section has holes to which negative pressure from a vacuum pump is supplied through a pipe system, The main holes in the vacuum table have caps that allow you to attach various formats of materials, 2. HQD spindle Brushless spindle from a renowned high-class manufacturer with a power of 9 kW , powered by an inverter, with overload protection. Milling electrospindle equipped with an innovative AIR cooling system . 3.Drive Energy-saving high-class drives Leadshine servo drives with 1500W power and high holding torque (Dual on the Y axis) controlled by the NK-105 G3 digital controller ensure excellent quality machining while maintaining high working speeds in individual directions. Brushless servo motors driving the X and Y axes transmit power through high-class planetary gears. The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The gate is moved along the X and Y axes using HIWIN guide strips and helical toothed gears, which guarantee many years of failure-free operation and are made of high-quality, hardened and hardened steel. 4. Construction The structure of the sliding gate is made of cast iron, which achieves incredible stiffness and absorbs vibrations generated during processing very well. 5. Magazine for 8 tools + tool measurement sensor The machine is equipped with an 8-position linear tool magazine, a set of ISO30 cones and ER32 bushings Hfedpfsvupcrjx Ah Nob The set includes holders: ISO30 and sleeves for mounting tools with dimensions: 1/2" - 6 pcs.; 1/8" - 2 pcs.; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. Each CNC milling machine is equipped with a precise Z-axis tool height sensor, which eliminates time for measurement corrections after each tool change. 6. Vacuum pump and extraction foot The use of a vacuum pump significantly increases the clamping force of the processed details on the machine table, thanks to which the material does not move. 4 independent vacuum sections. Technical parameters Workspace 2100x3100mm Z axis 300mm Construction Arm - cast iron / table - welded steel Drives Leadshine servo drives with a power of 1500W Table tee/hybrid Spindle power 9 kW Spindle Air-cooled HQD (oil mist optional) Spindle revolutions from 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Re-positioning accuracy 0.01mm Linear bearings trapezoidal rails, Hiwin bogies Fixing the material vacuum, hybrid Pump vacuum 2x7.5 kW (optional) Software UCanCAM V12 in Polish language version Dimensions 4070 x 2870 x 1900 mm Weight 2050 kg

Condition: new, Year of construction: 2025, CNC MILLING MACHINE C2131 IND (working area 2100 x 3100 mm) dynamic and precise milling plotter based on components from global manufacturers equipped, among others, with spindle of Italian production HSD. Work table Sectional table with six independent vacuum sections, made of rigid and resistant HPL panels, controlled directly from the control cabinet, Each section has holes into which the vacuum from the vacuum pump is fed via a system of tubes, The main openings in the vacuum table have plugs to accommodate different material formats, Table equipped with buffers in two axes! Pneumatic positioners to ensure that the material is always positioned in the same place, Spindle Hjdevup Unjpfx Ah Nsfb High-quality brushless spindle from a renowned manufacturer, 9 kW, powered by inverter, with overload protection . Milling electro-spindle with innovative AIR cooling system. 3.Drive Energy-efficient YASKAWA high-performance AC servo drives, controlled by a digital controller, provide excellent machining quality while maintaining high operating speeds in each direction, Brushless AC servo motors driving the X, Y axes transfer the drive via high-performance planetary gears The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The door is moved along the X and Y axes by HIWIN guide rails and bevel gears, which guarantee many years of trouble-free operation, and are made of high-quality hardened and tempered steel. Construction The rigid table structure , made of ribbed steel, excludes vibrations during the production process. 5 Tool magazine and tool measuring sensor The machine is equipped with a 12-position linear tool magazine, a set of ISO30 cones and ER32 bushings. Toolholders included: ISO30 and toolholder sleeves of size: 1/2’ - 6 pcs; 1/8’ - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. 6 Software, INDUSTRIAL CONTROL: The machine is controlled by a SYNTEC industrial controller as in large machining centres. Included with the controller: keypad and LCD display. Optional latest software UCanCAM V12 Vacuum pump (optional) and extraction foot. The use of a vacuum pump significantly increases the clamping force of the workpieces on the machine table, so that the material does not move. The extraction foot is penumatic, located at the spindle, and allows the connection of any chip extractor, keeping the machining clean, safe and at the same time maintaining the precision of the work Technical specifications Working area 2100x3100 mm Z axis 300 mm Structure Arm in cast iron / table in welded steel Drives hybrid servo motors (AC LEADSHINE) 1500W Hybrid table Spindle power 9 kW Shimpo gearbox Spindle speed 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Repositioning accuracy 0.01 mm Linear bearing trapezoidal rails, Hiwin carriages Material clamping vacuum, hybrid Vacuum pump (optional) 7.5 kW, 8 independent vacuum sections Software (optional) UCanCAM V12

Condition: new, Year of construction: 2025, CORMAK C2141 ATC PREMIUM (2100 x 4200 mm) is a dynamic and precise milling plotter based on components from global manufacturers, suitable for the toughest tasks, which works great in industrial production. Constant quality control and components used in the machine construction guarantee high quality processing of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, alucobond. 1. Work table Sectioning table with four independent vacuum sections, made of rigid and durable HPL boards, Each section has holes to which negative pressure from the vacuum pump is supplied through a system of pipes, The main holes in the vacuum table have plugs that allow you to attach different formats of materials, 2. HQD spindle Brushless spindle from a renowned high-class manufacturer with a power of 9 kW , powered by an inverter, with overload protection. Milling electrospindle equipped with an innovative AIR cooling system . Adapted to automatic tool changing, which shortens machining time due to the lack of downtime associated with manual cutter change. 3.Drive Energy-saving high-end drives Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) controlled by the NK-105 G3 digital controller , they ensure excellent quality machining while maintaining high working speeds in individual directions. Brushless servo motors driving the X and Y axes transmit power via high-quality planetary gears. The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The movement of the gate along the X and Y axes is carried out by means of HIWIN guide rails and helical gear wheels, which guarantee many years of trouble-free operation and are made of high-quality hardened and tempered steel. 4. Construction The construction of the sliding gate is made of cast iron, which achieves incredible rigidity and absorbs vibrations generated during processing very well. 5. 8-tool magazine + tool measurement sensor The machine is equipped with an 8-position linear tool magazine, a set of ISO30 cones and ER32 collets The set includes holders: ISO30 and sleeves for mounting tools in the following dimensions: 1/2" - 6 pcs.; 1/8" - 2 pcs.; 3-4mm - 2 pcs.; 5-6mm - 4 pcs.; 7-8mm - 2 pcs.; 9-10mm - 2 pcs. 6. Vacuum pump and suction foot (optional) Hfedpfx Ahovupu Us Neb 4 independent vacuum sections. The pneumatically operated extraction foot is located at the spindle and allows for the connection of any chip extraction system, maintaining the cleanliness of the processing, safety and at the same time maintaining the precision of the work. 7. Software, INDUSTRIAL CONTROL : Control NK-105 G3 The machine supports the latest version of CAD/CAM software. OPTIONALLY The latest UCanCAM V12 software Technical parameters Working Field 2100x4200mm Z-axis 300mm Design Arm - cast iron / table - welded steel Drives 1500W Leadshine servo drives Table T-shaped / hybrid Spindle power 9kW Spindle Air cooled HQD (oil mist optional) Spindle revolutions from 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Re-positioning accuracy 0.01mm Linear bearings trapezoidal rails, Hiwin trolleys Material fixing vacuum, hybrid Vacuum pump vacuum 2x7.5 kW (option) Software UCanCAM V12 (option) Dimensions 5070x2870x1900mm Weight 3350 kg