Used 4 Axis Cnc Milling Machine for sale (100,569)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm Bedexlip Aspfx Amrewu • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110°

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option Bsdpfx Amezc D Hforewu - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment.

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Bwodpfx Amezy Eg Hereu Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: ready for operation (used), Year of construction: 1999, Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement. Bwodpfx Amoylbqyoreu

Condition: ready for operation (used), Year of construction: 2003, CNC Milling Machine OPS Type OPS HSC 600 Year of manufacture 2003 CNC control system Andronic 3D path control with Ethernet interface Travel distances X/Y/Z 625/375/350 mm Tool changer based on Erowa system, 40 positions Spindle speeds 5000 – 40,000 rpm Bsdpfx Aez Huz Romrjwu Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3500 kg Price: Euro 3,750.00 (plus VAT), ex works

Condition: good (used), Year of construction: 1994, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, For sale is a Deckel Mori 70 V gantry machining center. The machining center is ready for immediate use and fully functional. Technical specifications: Year of manufacture: 1994 Grundig Dialog 112 control system X travel 700 mm Y travel 550 mm Z travel 500 mm SK 40 chuck mount Brushless AC servo motor Drive type: Continuously variable 0-8000 rpm Feed speed: Continuously variable 10000 mm/min Table size: 900 x 550 mm Table load: 0.8 t Machine weight: approx. 7.2 t Knoll scraper conveyor belt Internal cooling system Rapid traverse x/y 30000 mm/min Rapid traverse z 20000 mm/min Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT. Viewings available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website. Bodpfxov T U Udo Amrjwu

Condition: used, EMMEGI PHANTOMATIC 3-Axis CNC Machining Centre The EMMEGI PHANTOMATIC is a vertical 3-axis CNC machining centre designed for programmable machining operations on aluminium, PVC and steel profiles. Steel profiles can be processed up to a maximum thickness of 3 mm. The machine is suitable for milling, drilling, tapping and through-machining operations. It is equipped with a 5.5 kW electrospindle, reaching a maximum speed of 18,000 rpm, with an ISO 30 tool holder and manual tool change. The machine is operated through a CNC/PC control system with Cam-Editor-Drill software. It features four standard manually positioned clamps and two stops. Thanks to the workpiece repositioning function, it can process profiles with a maximum length of 4,800 or 6,800 mm, depending on the machine version. Main technical specifications: X-axis travel: 2,400 mm Y-axis travel: 240 mm Z-axis travel: 230 mm Maximum X- and Y-axis speed: 20 m/min Maximum Z-axis speed: 14.6 m/min X-, Y- and Z-axis acceleration: 1.66 m/s² Tool change: manual Maximum milling tool diameter: 50 mm Maximum tapping capacity: M8 Bedpfx Amoz Aqmwsrewu Standard clamps: 4 Stops: 2 Electrospindle power: 5.5 kW Maximum electrospindle speed: 18,000 rpm Tool holder: ISO 30 Installed electrical power: 7 kW Power supply: 380 V Operating pressure: 6–8 bar Air consumption: 50 Nl/min Maximum working length with repositioning: 4,800 mm Maximum working width: 240 mm Maximum working height: 230 mm Dimensions: 2,800 × 1,150 × 1,850 mm Weight: 600 kg

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Bsdezc D Dwjpfx Amrewu Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Table surface: 1600 x 2000 mm Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Year of construction: 2013, operating hours: 6,044 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040693, CNC-profielbewerkingsmachine met 4 assen: - Bouwjaar 2013 - Draaiuren: 6.044 uur Bwodpfx Aez Eqxcemreu - Bewerkingslengte: 7,6 m - Gereedschapsset De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine komt beschikbaar begin decemeber 2026.

Condition: not inspected (used), functionality: fully functional, machine/vehicle number: 1-105-2, spindle speed (max.): 3,000 rpm, total width: 3,590 mm, total length: 4,520 mm, total height: 3,400 mm, table length: 1,000 mm, table width: 1,000 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, power: 0.033 kW (0.04 HP), controller manufacturer: HEIDENHAIN, controller model: TNC 355, Immediate delivery. Bwedpfxez Hblpo Amrou

Condition: used, The FOM Industrie FLEN is a 4-axis CNC machining centre designed to perform complex operations on aluminium and steel profiles. The machine can accurately perform drilling, milling and tapping operations, making it suitable for both single-part production and medium-sized production runs. Thanks to its extensive axis travel and controlled electrospindle rotation, the FLEN provides operational versatility, high productivity and precision, even for the most complex machining operations. Main technical specifications: Controlled axes: 4 X-axis – Longitudinal travel: 7,030 mm Bwedpfoz Duipjx Amrju Y-axis – Transverse travel: 940 mm Z-axis – Vertical travel: 625 mm A-axis – Electrospindle rotation: from 15° to 195° Electrospindle power: 4 kW Tool holder: ISO 30 Maximum tool diameter: 220 mm Number of clamps: 8 Automatic clamp positioning Tool magazine: 5 positions Operating mode: Pendulum machining Machining operations: drilling, milling and tapping Suitable materials: aluminium, PVC and steel

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS 5-axis – year of manufacture 2003 – fully functional – ideal as a complete spare/donor machine. The machine is currently operational and can be inspected while running. Due to its age, various original parts are no longer available from Schüco. Therefore, the machine is being sold at any reasonable offer. Preferably sold as a complete unit; the buyer is responsible for disassembly and transport. TECHNICAL DETAILS X-axis: 6,650 mm Y-axis: 800 mm Z-axis: 500 mm X-axis feed rate: 0-40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0-30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: from 0-90° continuously C-axis rotation: from 0-360° continuously Rotation speed of B- and C-axes: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a length of 6,000 mm: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling: Ø 300 mm Maximum spindle motor power: 7 kW Spindle motor power for disc milling: 7 kW Spindle motor speed: 0-30,000 rpm Bwodexr N Rmspfx Amrju Tool change time: < 15 s (from clamping to clamping) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 Total machine weight: 6.5 tons WORKING AREA Number of clamping blocks: 8 pcs Positioning of the clamping blocks: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: used, Dimensions (LxW): 580 x 495 cm Selling price: CHF 1.000 (excl. BTW) New price indicational approx. 120.000 CHF With A-axis Saw blade tiltable: yes Laser guide: yes Worktable rotation: 360 degrees Worktable tiltable: yes Bodpfx Amoz D Tvbsrswu Worktable dimensions lxw: 3700 x 2100 mm Connection: 400V Approx. bridge length: 5800 mm Approx. bridge width: 4950 mm Total approx. dimensions lxwxh: 5800 x 5300 x 3000 mm Online auction of best brands and modern stone sawing, cutting and processing machines (e.g. 2022 DONATONI, 2021 CNC INTERMAC PRIMUS, MASTER, MARMO MECCANICCA etc.), large stock of natural stone plates incl. marble, granite etc. and rolling stock (e.g. VOLVO XC60, MERCEDES VITO, FIAT etc.) originating from the bankruptcy of natural stones, marble, granite etc. processing firm Schär + Trojahn AG in Niederwangen near Bern in Switzerland. The online auction opens Tuesday 22 September and closes Thursday 15 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 13 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment. Bwodpfxezkpupo Amrju

Condition: good (used), Year of construction: 2007, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 5 rpm, quill stroke: 60 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 350 mm, table length: 650 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 5 rpm, table load: 250 kg, overall weight: 1,900 kg, Equipment: rotational speed infinitely variable, Travel X/Y/Z 400/350/400 mm, spindle speed 5 - 4500 rpm stepless, motor 8,0 KW, spindle taper ISO 40, control Heidenhain TNC 124, table size 650x350 mm, hydraulic tool clamping, coolant device, spash guard, handwheel, tool holders, machine feet, manual Bwsdpozuzu Nofx Amrou

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition Bwjdpfxju Tln Ne Amrju

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis CNC machining center FOM INDUSTRIE FNC 230, year 2023 Condition: excellent, as new Standard configuration: ▪ Electrospindle 5 kW, 18.000 rpm (ISO 30) ▪ 10 location tool magazine on Left of machine base ▪ No. 2 pairs of pneumatic vices with positioning through the travelling column ▪ Left retractable fixed pneumatic stop ▪ Minimum quantity lubrication (MQL) with pure oil ▪ Manual greasing device ▪ Chip and waste collection tank in base ▪ Perimeter guard system. Retractable front door with automatic opening ▪ Control equipment: POWER-I ▪ Movable control console Bedpfx Amez Ey Uasrswu ▪ Handheld control unit ▪ 24” Display ▪ Licence for FST CAM 4 program Option installed on the machine: ▪ PR205562 Tool length measurement and tool breakage detection device ▪ PR205563 X-FLOW (Automatic orientation of lubrication nozzles) ▪ PR205564 Pair of additional vice swith positioning through travelling column ▪ PR205921 SINGLE WORKING AREA 2 PIECES MACHINING WITH X PAL: - LED bar - SW for profile positioning - SW to view machining cycle progress - Device to measure profile length PR205921 - ''Clock'' time calculation module program user license - Right pneumatic fixed stop - Tunnel for oversized profile machining - SW to manage oversized machining operations ▪ PR205571 Lubrocooling with minimum use of water-oil emulsion ▪ PR205574 Rear chip collection tanks ▪ PR205576 Horizontal blade assembly cone with blade Ø 150 mm  ▪ PR205577 Centralised automatic lubrication system ▪ PR202971 Wireless optical bar code and QR code reader, complete with software for importing data compatible with Fom protocol ▪ ZP713706 License module Statistics: version for CNC 4-axis. Software for collecting machine operation and productivity data

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Machine No.: 11720001123 Control Heidenhain iTNC 530 HSCI (3D path control) Travel Paths X: 1,850 mm Y: 2,100 mm Z: 1,250 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 1,700 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 20–12,000 min⁻¹ Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Torque: 288 / 187 Nm Tool holder: SK50 according to DIN 69871 Tool Changer 60-fold chain magazine Double gripper Equipment IKZ 40 bar Chip conveyor Tool measurement system Blum Laser NT Hybrid Heidenhain TS 640 infrared probe Electronic handwheel Minimum quantity lubrication (MQL) Oil/emulsion mist separator Coolant through spindle Coolant tank 980 l Rotating viewing window 3D quickSET Machine Protection Control (MPC) Adaptive Feed Control (AFC) ATC (Application Tuning Cycle) DMG MORI NetService DMG MORI SMARTkey Documentation and electrical schematic (German) Travel X-axis: 1850 - mm Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Travel Z-axis: 1250 - mm Year of construction: 2,012 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes Bsdpfxezv A Ako Amrjwu

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5921, overall weight: 12,000 kg, input current: 41 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, 5-axis CNC machining center 2 retractable tables, 1700x1425 mm each Linear axes X-4300, Y-2300, Z-1200 mm Rotary axes B +/- 120, C +/- 240 Tool magazines, 2 x 6 positions OSAI control system Bertronic remote control with teach-in functions 7.5 kW electrospindle, HSK-63F 2 vacuum pumps, 100 m3/hour, two clamping zones (can be combined into one large zone) Bodpsz H Slmefx Amrswu Exhaust hoods for chip removal around the tables in the work area RENISHAW TS27 probe for tool length measurement and rotary axis calibration Free-standing electrical control cabinet Complete enclosure of the machine to protect against dust and noise CE marking The machine is installed and connected – it can be tested.

Condition: new, Year of construction: 2026, P5 Retrofit CNC milling center for 5-axis machining of thermoformed parts. Working area (cube dimensions): X-axis: 600 mm Y-axis: 800 mm Z-axis: 400 mm, with a fixture height of 120 mm. All specifications are based on a tool length of 60 mm from the front edge of the collet nut. Max. shank diameter: 10 mm (ER16 mini collet). Table design: 1 piece aluminum flat table, size: 600 x 800 mm, with threaded bushings. Vacuum supply: 1 piece vacuum clamping circuit on the table, vacuum distribution pipe with 3 x quick-release couplings NW 7.2, digital pressure monitor. 1 piece vacuum pump, suction capacity approx. 40 m³/h. Milling spindle: 1 piece milling spindle (double spindle), air-cooled, 2 x ER16 mini collet chucks, power 2.5 kW, max. speed 27,000 1/min. Axis drives: Ball screw in the X / Y axis and Z axis; A / B axes with hollow shaft drives. Rapid traverse speeds X / Y axis => 45 m/min Z axis => 45 m/min Rotary / swivel axis => 12,000°/min. Acceleration (max.) => 2 m/sec² All axes are equipped with digital technology and absolute measuring systems. This eliminates the need for a reference run at the start of operation. Machine control: 1 piece BWO VEKTOR C Basic Plus Robot machine control. The complete unit is housed in an enclosure with a 15-inch capacitive touchscreen, which is mounted on the front of the machine. 64 MB NC memory USB interface Safety features: The machine is equipped with a robust sheet metal guard, with a separate access door for the rear of the machine; the guard is open at the top. 1 piece sliding door (manually operated), to demarcate the working area. Availability: The machine is operational and can be inspected immediately. Available from stock, delivery and installation can be arranged on short notice. Bwjdpfezzzrhex Amreu Price on request, please request our offer.

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Bwsdpfxoxc Tr Ae Amrsu Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Year of construction: 2018, operating hours: 3,380 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040950, 4-assige CNC-profielbewerkingsmachine: - Bouwjaar 2018 - Draaiuren 3.380 uur - Windows 10 operating system - Werklengte 7,6m - Lengtemeetsysteem profielen - Barcodescanner Bsdsz Eqpnspfx Amrewu - Toolset Machine is werkend te zien, demontage door koper. Per direct beschikbaar.

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Bsdpozr Uudofx Amrswu Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm Bwodpfx Aszzf Ruemrsu TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Bedpfx Amjzy Rrzorewu Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T