Used Boring Milling Machine for sale (65,482)

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg Nsdpfx Aoyxr Hmshvokw dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head

Condition: used, Year of construction: 2015, machine/vehicle number: PWA-201511051N, spindle speed (max.): 1,300 rpm, spindle speed (min.): 40 rpm, Universal milling machine with accessories Nksdpfx Aheyxl Rlevsw

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Nkodpsu Dahnsfx Ahvow Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Nkedpfxsqa Txqj Ahvsw Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Nkedpfx Ahox T Ddyovew

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,510 mm, table width: 350 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1510 x 350mm (60” x 14”) Nkedpfx Ajygk Drehvow Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Table Type Boring and Milling Machine | Brand: TOS-VARNSDORF | Type: VARIA | Nksdpfjyr R Syjx Ahvjw Year of construction 2005 The machine can be inspected under power by appointment. Condition: Fully functional / ready for use. TECHNICAL DATA: - Working spindle diameter: 130 mm - Hollow cone working spindle: ISO 50 - Spindle speed range: 10 - 3.500 rpm - Crosswise adjustment of table X: 4.000 mm - Vertical adjustment spindle box Y: 2.500 mm - Longitudinal adjustment of the column Z: 2.000 mm - Extension of working spindle W: 800 mm - Clamping surface of the table: 1.800 x 1.800 mm - Max. Workpiece weight: 20 tons - Machine weight: approx. 36,85 tons Electrical data: - Total installed power consumption: 110 kVA EQUIPMENT: - CNC Control: SINUMERIK 840D pl - Tool changer (chain magazine): 60-position - Chip conveyor - Documentation - CE marking Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: used, Year of construction: 1993, spindle diameter 100 mm x-travel 1250 mm y-travel 1100 mm z-travel 950 mm Table load 3000 kg table surface area 1000x1120 mm turning speeds 16-1250 U/min spindle taper ISO 50 Control Heidenhain weight of the machine ca. 13,4 t No. 2022 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Nodpfxeyuttfo Ahvskw

Condition: used, Year of construction: 1987, spindle diameter 130 mm x-travel 3000 mm y-travel 1600 mm z-travel 1250 mm Control Heidenhain type TNC 426 table surface area 2000x1600 mm Table load 12500 kg Rotary table 360 ° spindle turning speed range 12-3000 U/min Feed 1-9999 mm/min Rapid movement 10000 mm/min Nodpfoyutq Dsx Ahvskw total power requirement 80 KVA The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1988, spindle diameter 90 mm x-travel 2000 mm y-travel 1250 mm z-travel 1250 mm spindle turning speed range 8-1600 U/min spindle stroke 720 mm Feed 1-2500 mm/U weight of the machine ca. 9,1 t 31881-07/9 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Nkjdpfxoyutqkj Ahvow About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Nkedjxcgtgjpfx Ahvow Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. Nkodpjyuql Ejfx Ahvew total power requirement 25 kW

Condition: used, spindle diameter 102 mm x-travel 1600 mm y-travel 1200 mm z-travel 1500 mm w-axis 700 mm Table dimensions 1250x1400 mm number of spindle speeds 8-1600 Control Heidenhain TNC 131 Nsdpfxsyuqllj Ahvjkw total power requirement 15 kW

Condition: used, spindle diameter 110 mm x-travel 2000 mm y-travel 1500 mm z-travel 1450 mm table surface area 1400 x 1600 mm Nodpfxsyuqhye Ahvokw taper ISO 50 spindle speed: 2 - 2500 Control TOSNUC 7-3 total power requirement 22 kW

Condition: used, spindle diameter 90 mm x-travel 1250 mm y-travel 1120 mm z-travel 1400 mm w-axis 710 mm spindle turning speed range 28 - 1400(x18) U/min Nksdpfx Aheyuqg Nevew tool adaptor MT 5 Table dimensions 1000 x 1120 mm Facing head, 3 axis digital read out, spindle support and tailstock.

Condition: used, spindle diameter 120 mm x-travel 1800 mm y-travel 1300 mm z-travel 1500 mm Nedpfx Aheyuqgisvokw taper ISO 50 Table dimensions 1120x1400 mm number of spindle speeds 0-1.000 total power requirement 13,2 kW

Condition: new, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm z-travel 2000 mm w-axis 700 mm table load 10.000 kg Table dimensions 1600x1800 mm Control Fanuc 31iMB Nedpfx Ahoyuqgcovokw voltage 400 V number of spindle speeds 35-3000 U/min taper ISO 50 Tool changer 60 total power requirement 20/30 kW

Condition: used, spindle diameter 90 mm x-travel 1250 mm y-travel 1200 mm Table dimensions 1000 x 1120 mm Nkjdpfx Ajyuqfxshvjw w-axis 700 mm tool adaptor ISO 40 spindle turning speed range 28 - 1400(x18) U/min z-travel 1600 mm total power requirement 7,5 kW

Condition: used, spindle diameter 125 mm x-travel 2800 mm y-travel 2000 mm z-travel 2500 mm number of spindle speeds 3,55 - 710 (27x) taper ISO 50 Nodpfx Ahoyuqffovokw voltage 400 V total power requirement 18,5 kW

Condition: used, Year of construction: 1982, spindle diameter 130 mm x-travel 2750 mm y-travel 2000 mm z-travel 2330 mm spindle taper ISO 50 turning speeds 900 U/min table surface area 1600x1900 mm Radial face slide 600 mm Control Heidenhain TNC 131 bore spindle stroke 1000 mm feed 2500 m/min Table load 8000 kg weight of the machine ca. 37,8 t Nsdpfxeyt R Htj Ahvjkw Rotating table 360° The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1993, spindle diameter 102 mm x-travel 1600 mm y-travel 1000 mm z-travel 1600 mm Control Heidenhain type TNC 410 table surface area 1000x1120 mm Table load 3000 kg spindle stroke 710 mm spindle turning speed range 4-1600 U/min main drive motor 13 kW weight of the machine ca. 12 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Nsdpfx Aoyt R Ecehvjkw possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 125 mm Nodpfxoyt R Anj Ahvokw x-travel 2000 mm y-travel 1100 mm z-travel SK 50 mm spindle taper Philips 2500 digital readout Pfillips turning speeds 925 U/min spindle stroke 800 mm Table 1000x1400 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 4758.02 € 18 mm MK 2 240 mm 30 - 3000 U/min M12 355 mm 705 mm 1065 mm 170 kg 100 mm 155 - 415 mm 155 - 550 mm 340 x 280 mm 82 mm INCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026) - VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8) - FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43) - FLOTT tap holder B16 (list price €191.57) Nsdpfxoynm Aaj Ahvokw - Taper mandrel DIN 238 MK2/B16 (list price €26.18) - Taper mandrel DIN 238 MK2/B18 (list price €26.18) - Felix 2.0 - 100 mm (list price €428.36) YOU SAVE: 842,62 € Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 Njdeynmz Nepfx Ahvskw 180 mm 250 - 3000 U/min 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min Njdpfx Ahswdta Eovjkw feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation