Used Elumatec for sale (137)

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Cgjdpfx Aszgfvboilow Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cgedpfx Aiezi A Uaelsw Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: used, Automatic feed via Elgo control E 255 Cjdpfoywxwpjx Ailogw For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm

Year of construction: 2001, condition: used, Manual length adjustment via handwheel with digital display For attachment to any Elumatec single-head saw (right) Cgedpfx Aezh Iucjilsw Max. insertion length: 4,500 mm Pneumatic parking brake

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 For attachment to any Elumatec single-head saw (right) Cedpozh Itfofx Ailegw Max. push length: 3000 mm

Condition: used, Press height 140 mm Press force 70 kN (7 t) Cgodpozh Irbjfx Ailjw Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 EU shipping - 350 euro Cgsdpfx Aievi R Avolow

Condition: excellent (used), Shipping within the EU: 350 euros Cedpjl Sklgsfx Ailegw

Condition: excellent (used), shipping EU ~300euro Cgjdpfjl Skk Uox Ailew

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Double-mitre saw Elumatec DG 142/01 Cutting length min. 300, max. 4500 mm Max. saw blade diameter 500 mm Pneumatic angle adjustment 45-90 degrees Digital angle indicators Cgedpoziz U Sjfx Ailsw Automatic length positioning Integrated roller conveyor Pneumatically folding support arms Label printer

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. Codpfxszavzvo Ailjgw DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. A stable loading device is available.

Year of construction: 2013, condition: used, Max. saw blade diameter: 380 mm Stepless saw blade feed via two-hand operation Pneumatic material clamps Cjdszgupqopfx Ailsgw Minimum quantity spray device Weight: about 350 kg

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using side guides or templates in a 1:1 ratio Pneumatic copying stylus with two stages for two different cutter diameters The patented suspension of the copying lever guarantees precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via "spindle lock" Pneumatic material clamping device Metering spray device Cgsdoxqihijpfx Ailjw Options Copying templates milled to standard dowel hole and PZ milling pattern Copying stylus Collet Guide system Material clamping device with 2 clamping cylinders Milling tool 8 mm Availability: short-term Location: Röllbach

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Usable length: 7.6 m EQUIPMENT 12 pneumatic clamping chucks Cgedszhuyfjpfx Ailew 2 work areas

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price Cgjdezf I Uwepfx Ailew

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Cgedszf I Ttjpfx Ailow Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Cjdpfxszf Agzo Ailegw Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg

Year of construction: 2009, condition: excellent (used), Elumatec SBZ 140, extended version: 7.6 meters Weight approximately 5000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety guard Light curtains Automatic clamping detection Central lubrication Coolant spray system Chip trolley Csdpfszhg S Tex Ailogw Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer. Max. milling diameter: 80 mm Max. sawing diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, -90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (in many configurations) Control: 4-axis CNC system, with PC control, color screen, USB & network. Software: eluCam. Automatic material clamping, automatic positioning via indexing pins Pendulum/shuttle operation (two work zones), which improves production cycle time. In addition to milling and drilling, it can also tap, saw, and perform profile machining – all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT is reclaimable for businesses).

Condition: good (used), Year of construction: 2021, machine/vehicle number: 161000228, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 280 mm, rotational speed (max.): 4,100 rpm, total length: 10,000 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 700 kg, saw blade speed: 3,200 rpm, ELUMATEC TS 161/21 Undercarriage Circular Saw - Power: 1100 W - Swivel range: 90° to 45° to the left and 90° to 0° to the right - Includes digital length stop with HECHT manufacturer's control system, as well as a bilateral roller guide, width: 90 mm Cjdpfxozdyrre Ailjgw Attention: the item must be picked up on a fixed date of July 2, 2026, at a time to be agreed upon. FCA D-72770 Reutlingen – loaded onto a truck.

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 223002360, milling height: 150 mm, input voltage: 400 V, overall weight: 700 kg, total length: 1,700 mm, total width: 1,000 mm, total height: 1,600 mm, input frequency: 50 Hz, milling length: 400 mm, pivoting range: 60 °, rotational speed (max.): 2,800 rpm, ELUMATEC AF 223/01 Notching milling machine Cedpfx Aszdyqneiljgw - Rated current: 6.1 A - Power consumption: 2500 W - Swivel range: up to 60° to the right and left - Max. milling depth: 110 mm - Max. profile height: 200 mm - Max. cutter diameter: 280 mm - Cutter mounting bore diameter: 40 H7 mm Attention: The item must be collected on July 2, 2026, at a date to be confirmed. FCA D-72770 Reutlingen - loaded onto a truck.

Year of construction: 2005, condition: used, CNC Machining Center Elumatec SBZ 122, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, highly regarded for its machining precision and operational continuity. Main features: - 3-axis CNC machining center - High-rigidity steel frame - Vertical spindle for milling, drilling, and complex operations - Worktable with pneumatic vices for stable and precise clamping - Long-travel longitudinal axis, ideal for processing profiles of considerable length Cedpfx Aeyg Ht Ajilogw - Protective enclosure with chip conveyor - Elumatec CNC control unit - Ideal for medium to high production and repetitive operations Applications: - Milling - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Key data: - Manufacturer: Elumatec - Model: SBZ 122 - Year of manufacture: 2005 - Condition: Used Condition: - Machine in good overall condition - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete workbench - Pneumatic clamping system - Control panel - Original covers and safety guards

Year of construction: 2005, condition: used, functionality: fully functional, machine/vehicle number: 1223030045, elumatec SBZ 122/30 profile machining centre, 3-axis controlled, machining length 3,850 mm - 2 tool magazines Csdpfx Aiezgv Hwolsgw - 2 mitre heads - profile length measurement - 4 pneumatic clamps - automatic clamping adjustment - manual control panel - E550 control unit - spindle with 6 kW power - light curtain safety system Video of the machine in operation available upon request.

Condition: excellent (used), Year of construction: 2017, Very good technical condition. Ready for operation. The machine is designed for cutting aluminum and PVC. Codpfszgu Efsx Ailsgw E 580 control system. Disc diameter: 500 mm. Cutting according to external dimensions, without correction. Automatic lowering and raising of disc guards. Pneumatic adjustment of the cutting angle from 45 to 90 degrees. Printer.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, rotational speed (max.): 12,000 rpm, Technical specifications – Elumatec AS 70/44 1-spindle copy milling machine for aluminum and PVC profiles Feature Value Machine type 1-spindle copy milling machine Milling range with stop 230 × 90 mm Milling range with copy template 230 × 90 mm Clamping range for profiles 180 × 130 mm Milling stroke 110 mm Cgodpfx Aezgglksiljw Mains connection 230/400 V, 3 ~, 50 Hz Motor power 0.74 kW Spindle speed 12,000 rpm Operating pressure 7 bar Air consumption 12 l/cycle without spray device, 24 l/cycle with spray device Dimensions (L × W × H) 720 × 650 × 1,440 mm Weight approx. 120 kg Equipment Versatile for processing aluminum and PVC profiles. Copy milling in a 1:1 ratio using templates or stops. Pneumatic material clamping. Manual feeler pin with three levels for different cutter diameters. Pulse spray device for tool cooling. Simple operation via two control levers. Quick setup and high machining accuracy.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Technical data – Elumatec TS 161 Cgsdpfjzf Rllox Ailow Machine type: Table saw Saw blade diameter: 280 mm Saw blade speed: 3,200 rpm Motor power: 1.1 kW Operating voltage: 400 V / 3~ / 50 Hz Swivel range: 0° to 45° to the left Cutting speed: 3,200 m/min Dimensions (L × W × H): approx. 650 × 750 × 1,300 mm Weight: approx. 96 kg