Used 4 Axis Cnc Milling Machine for sale (96,416)

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Codpextmqtofx Ab Tehf Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible. Cjdpfx Asxvrvgeb Tshf

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 24,000 rpm, table load: 15,000 kg, Submitting a bid obliges the buyer to collect the machine by the deadline of 27.11.2025! The machine can still be inspected under power until week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The CNC control was upgraded in 2014! TECHNICAL DETAILS Working Areas X-axis: 6,000 mm Y-axis: 2,700 mm Z-axis: 1,250 mm Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool holder: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminium Linear Axis Drives Feed rate X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² Chedoxr U Drepfx Ab Tef MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Connection Data Power requirement: 28 kW Main fuse: 63 A Dimensions & Weight Required floor space: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Chsdpfx Aet R Tgisb Tef Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW Chodpfxjxr A A Aj Ab Tjf machine in stock.

Condition: excellent (used), Brand: CORREA Model CF-17 Cnc : HEIDENHAIN 360 Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-2750 rpm Range : 5-5000 Spindle power : 17 kw Max. Weight carrying on table : 3.500 kg Csdjxcy D Sjpfx Ab Tshf Machine weight: 9.000 kg

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Codpfjxtbkusx Ab Tjhf Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1994, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: Knuth, CNC tool milling machine type WF 5 NC -Clamping table: 800 x 330 mm -Travel: X/Y/Z 400/330/440 mm -Spindle holder: SK40 -Quill stroke: 60 mm -Speeds from: 63 to 3150 rpm -Coolant system -Accessories: including extensive accessories see photos -Dimensions: Machine: 1500/1345/H1900 mm / Control cabinet 750/450/H1730 mm Chodpfswyivnjx Ab Tef -Total weight: 1960 kg

Year of construction: 1987, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible. Codpfx Asxvddvsb Tohf

Condition: used, Year of construction: 1990, Weight . kg Year . Chsdeud Tr Rjpfx Ab Tjf content Rubintastkopf cbm

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Chodjxdwndjpfx Ab Tjf Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, Travel (X/Y/Z): 2,700 x 1,600 x 900 mm Table size: 2,400 x 1,200 mm Milling spindle: Hiteco (5,000-36,000 rpm) Tool changer: 12 positions Control system: Siemens Sinumerik 840D with additional HT2 hand-held unit Chedpfx Asxuxgpsb Tof Vacuum pump: 70 m³/h Machine operating hours: approx. 2,000 h Spindle hours: approx. 300 h Equipment: Chip pre-filter with electronic pressure monitoring, rotary encoder for thread cutting, mist lubrication system, funnel head extraction, tool breakage monitoring, machine enclosure

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, position of the milling head: 2.5º x 2.5º, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table load: 7,000 kg, table length: 4,100 mm, BED TYPE MILLING MACHINE LAGUN GBR 4 (GORATU) TECHNICAL SPECIFICATIONS Manufacturer: Lagun Goratu Model: GBR-4 Year: 2016 CNC: Heidenhain iTNC 530 Spindle hours: 6000h Table: 4100 x 1000 mm Max weight: 7000 kg X/Y/Z travel: 4000/1200/1500 mm Spindle taper: ISO 50 / 4000 rpm Internal coolant: 30 Bar Automatic head: 2.5º x 2.5º Tool magazine: 24 ATC Chodpfexuglysx Ab Tef PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop slam switch greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool change carried out automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled table – generously sized and finely surface-machined • Large access doors to minimize cleaning and maintenance times • LED machine lamp for full illumination of the work area • Additional SIEMENS package: material defect warranty and free on-site service (OSS) SINUMERIK 808D • Software package identical to control version, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no reference run required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution Additional SIEMENS OSS package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Chodpfxow Ea Sws Ab Tef Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Horizontal milling table Length 690 mm Width 225 mm Vertical spindle to table distance min. 90 mm Vertical spindle to table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot pitch 63 mm Maximum load 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle to column distance min. 280 mm Spindle to column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power S1 continuous operation 3.7 kW Drive motor power S6-30% duty cycle 5.5 kW Drive motor torque S1 continuous operation 24 Nm Drive motor torque S6-30% duty cycle 36 Nm Feed speed X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis S1 continuous operation 3.5 Nm Y-axis S1 continuous operation 6 Nm Z-axis S1 continuous operation 6 Nm Tool changer Type: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Cjdpfx Ajxu I Atjb Tohf

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Chjdpfx Absu T S Dwe Tof Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 kgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security omatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Immediately available stock machine from our showroom in Trencin (SK). EMCOMAT FB 450 equipped with Siemens Sinumerik 828D control. DEMO machine in "AS NEW" condition, ready for immediate delivery. We are happy to prepare an individual quotation for you. Visit us to inspect and test the machine under power. Working range X450/Y350/Z400 mm Table size 800 x 400 mm Drive power 7/10 kW Stepless speed range 10–5000 rpm SIEMENS Sinumerik 828D Universal toolroom milling and drilling machine featuring the advanced Sinumerik 828D system and hydraulic tool clamping. Working range X450/Y350/Z400 mm Drive power 7/10 kW Spindle speed 10–5000 rpm Feed rate 10–2000 mm/min Rapid traverse up to 5000 mm/min Machining accuracy as per DIN 8615 Tool clamping: DIN 69871 SK40 Features: - Linear guides - Ball screws - Vertical milling head swivels +/-90° with 80 mm quill travel - Swivel device for vertical head - Hydraulic tool clamping Chsdsxapdcepfx Ab Tsf - Coolant system - LED machine lighting - Rigid angle table 800x400 mm - Chip tray - Automatic central lubrication - Operating tools supplied - Documentation in Czech and English - Sinumerik 828D available in Czech, German, and English - 15" multi-touch display - Includes control package for 3 axes with ball screws and servo motors - Machining cycles with graphical support: - Drilling, deep drilling, reaming - Thread cutting (with length compensation) on pitch circles and in line of holes - Rectangular and circular pocketing - Slotting cycle - Dwell cycle - USB interface, etc.

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. Csdou Ndbpepfx Ab Tohf *

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Codpjxcgtgefx Ab Tjhf Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 80 CNC milling machine direct from the manufacturer. - Machine in cast iron column design for high rigidity - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Chodpew Ea Rtsfx Ab Tjf Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 550 mm T-slots size 16 mm Number of T-slots 5 T-slot spacing 50 mm Load capacity max. 200 kg Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel distance X-axis automatic 450 mm Y-axis automatic 260 mm Z-axis automatic 450 mm Distance spindle - column max. 370 mm Vertical spindle Spindle holder BT 40 Speed range 50 - 10000 min¯¹ Power drive motor continuous operation S1 3.7 kW Power drive motor S6-30 % operation 5.5 kW Torque drive motor continuous operation S1 24 Nm Torque drive motor 30% operation S6 36 Nm Feed motor Torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Tool changer Carousel type Number of tool positions 12 tools Tool diameter max. 95 mm Tool length max. 300 mm Tool weight max. 8 kg Time tool change chip to chip (C to C) 7 s

Condition: ready for operation (used), Year of construction: 2011, Two CNC milling machines DMG are available. 1) Deckel Maho DMU 100 monoBlock, year of manufacture: 2011, travel X/Y/Z: 1150mm/710mm/710mm, tool positions: 32, rapid traverse: 30m/min, tool holder: SK40, speed: 18000rpm. Machine dimensions X/Y/Z: approx. 4250mm/3500mm/3300mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 30521h, spindle hours: 15388h. 2) Deckel Maho DMU 60 monoBlock, year of manufacture: 2006, travel X/Y/Z: 730mm/560mm/560mm, tool positions: 24, rapid traverse: 30m/min, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2900mm/1900mm/2250mm, weight: approx. 7000kg, control: Heidenhain iTNC 530, operating hours: 39296h, spindle hours: 15305h. Documentation available. An on-site inspection is possible. Only package sale possible. Chodpsxtpqvofx Ab Tjf

Condition: ready for operation (used), total height: 3,850 mm, total width: 4,190 mm, total length: 11,300 mm, controller manufacturer: Heidenhain, empty load weight: 22,000 kg, CNC indexeerfreeskop (2,5°) spaantransporteur inbegrepen Optioneel: machine kan worden uitgerust met nieuwe Heidenhain 320-besturing Longitudinal travel X-axe: 6500 mm Crosstravel Y -axe: 1600 mm Travel Z-axe (Height): 900 mm Dimensions clamping space - table: 8000 x 800 mm Power on spindle: 22/26 kW Chjdpjxpgfvefx Ab Tef Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 20 > 3000 rpm

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, TECHNICAL DETAILS Axes: 5 controlled X travel: 4,000 mm Y travel: 3,400 mm Column clearance: 2,000 mm Z travel: 1,000 mm Control: Siemens 840D SL Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size (longitudinal): 3,000 mm Table size (cross): 1,500 mm C-axis swivel range: 0–360° (in 1° increments) Swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS Total power requirement: 70 kVA Csdpextb Sxefx Ab Tshf Machine weight: approx. 82 t Footprint: approx. 10,200 mm x 7,200 mm x 5,925 mm EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Chsdpow Ea R Hofx Ab Tjf Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: 65-P10-CF Zware frees- en boormachine Longitudinale X-beweging van de kolom: 24 meter Kruis Z-verplaatsing of spindeldiameter: 254 mm - verplaatsing: 2133 mm incl. adapter ISO-60 naar ISO-50 incl. vele verschillende verlengstukken voor spindel- en freeskoppen Kruisbeweging van de kolom in W-richting: 1219 mm (kogelomloopspindel) Totale verticale slag: 3352 mm! Verticale Y-beweging van de kolom: 4572 mm Gewicht van machine + draaitafel: 200 ton 4 geharde geleiders geïntegreerde smering Heidenhain CNC-besturing CNC-draaitafel continu: 4500 x 3500 mm Maximaal 60 ton op tafel Dwarsverplaatsing van de tafel: 2000 mm Oppervlakte t-groeftafels: 25.000 x 6.900 mm Gewicht van de T-sleuftafels: 180 ton Longitudinal travel X-axe: 24 000 mm Crosstravel Y -axe: 2133 mm Travel Z-axe (Height): 4572 mm Power on spindle: 85 HP / 65 kW Admission in millingheadspindle (ISO): ISO 60 (dia 254 mm) Chedpfx Abjxpgf Ae Tsf Max speedrange: 1,5 > 1200 rpm