4 jaw chuck for lathe buy used

Sort by
Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4

key bar three-jaw lathe chuck RÖHM DURO 315

1.300  €
Fixed price not including VAT
Submit request
Minden, GermanyGermany dealership location
6476 km
used
1.300  €
Fixed price not including VAT
Submit request
Call
diameter 315 mm outer clamping range 12 to 323 mm inner clamping range 102 to 319 mm speed max. 3,300 rpm Bbj9q3chpj clamping force 67kN version with basis and reversible top jaws passage 87 mm complete height 145 mm short taper mounting DIN 55027 size 6 distance between bolts 135 mm weight 79 kg more
2

Lathe chuck jaws unbekannt Backen

Tönisvorst, GermanyGermany dealership location
6366 km
used
Request priceCall
3 jaws for lathe chuck Hvksob9 more
4

Three-jaw lathe chuck 500mm Zentra (baugleich Bison)

Kirchenlamitz, GermanyGermany dealership location
6772 km
2015
as good as new (ex-display)
Request priceCall
Zentra (identical Bison) 3-jaw lathe chucks DIN 55027 concentricity better than DIN 6386 I (see picture) Diameter: 500mm passage: 190mm Spindle taper: KK 11 Weight: 150kg VAT per 1 set turning and drilling jaws, key, fixing screws.. The spin chuck is brand new and boxed. Original price about 4350 plus. VAT Chucks in almost all sizes and models in stock, please ask to the desired size and execution, we will submit a cost-effective deal. Ypqcek more
4

combi three-jaw lathe chuck Roto Record DHK 250 x 3

240  €
Fixed price not including VAT
Submit request
Minden, GermanyGermany dealership location
6476 km
used
240  €
Fixed price not including VAT
Submit request
Call
diameter 250 mm centrically clamping with three individually clamping jaws rotation speed max. 1,300 rpm Yxd8uztsi passage 80 mm height 95 mm mounting short taper DIN55022 size 6 screw size M12 weight 31 kg more
3

Lathe chuck jaws unbekannt SE 8006

Tönisvorst, GermanyGermany dealership location
6366 km
used
Request priceCall
Rotary chuck jaws Bshta7qs SE 8006 more
2

Lathe chuck jaws Schunk SFA 250

Tönisvorst, GermanyGermany dealership location
6366 km
used
Request priceCall
Rotary Chuck JAWS make Schunck SFA 250 C 33 Inowuw3xa more
2

Lathe chuck jaws unbekannt unbekannt

Tönisvorst, GermanyGermany dealership location
6366 km
used
Request priceCall
Lathe chuck jaws Bsetvfii more
3

Chucking Automatic Lathe-Single Spindle HESTIKA HM 26

Bühl, GermanyGermany dealership location
6593 km
1966
used
Request priceCall
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW Uqvqibp7u weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more


4 jaw chuc...
daily

New machines via email!

Stay updated!
1

Miscellaneous 1000mm 4 Jaw Chuck with 500mm Hollow Spindle

Sheffield, United KingdomUnited Kingdom dealership location
5781 km
ready for operation (used)
Request priceCall
Ne2sr Large 4 Jaw 1000mm Capacity Chuck, 4 complete Jaws 500mm Hollow Spindle, Very condition which and is virtually unused from new more
3

Chucking Automatic Lathe - Multi Spindle INDEX MS 50

Metzingen, GermanyGermany dealership location
6677 km
1995
used
Request priceCall
number of spindles 6 diameter 160 mm turning length mm total power requirement 50 kW Con8qup weight of the machine ca. 16500 kg dimensions of the machine ca. 1550x5050 mm 6-Spindle CNC Controlled Chucking Automatic more
2

Chuck 4 jaw independent 800mm Klofper Germany

Enschede, NetherlandsNetherlands
6350 km
good condition (used)
Request priceCall
Independent 4 jaw Chuck 800mm Boring 240mm Bcwq0u7ur0 Connection DIN 6350 more
3

spiral ring lathe chuck

320  €
Fixed price not including VAT
Submit request
Minden, GermanyGermany dealership location
6476 km
used
320  €
Fixed price not including VAT
Submit request
Call
diameter 190 mm base jaws which are centrically adjustable top jaws which are individually adjustable Yxcxtpssf through-bore 50 mm hole circle 176 mm height 145 mm weight 14.5 kg more
14

Sundry Lathes LEOPOLDO PONTIGGIA T Facing Lathe, Fanuc 0-TT Control. 1700mm Chuck. 1000mm traverse

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Request priceCall
Swing over turning bed 2140 mm Swing over turning crossslide 1300 mm 4 jaw chuck 1700 mm Control Fanuc o-tt G9bh978su Fitted with Double Toolpost (1 x boring, 1 x turning), 20 piece tool changer, hydraulic chuck, electronic handwheel Equipment 800 mm 3 jaw chuck. Length 4.5 m Width 4.3 m Height 2.15 m Nett weight approx. 15 ton more
1

Chucking Automatic Lathe-Single Spindle BOLEY BDA-H

Bühl, GermanyGermany dealership location
6593 km
1981
used
Request priceCall
turning diameter ca. 100 mm turning length 100 mm number of slides 2 spindle hollow 42 mm face slide travel 55 mm Uqvp8qkjt turning speed range max. 5000 U/min greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
2

Four-jaw Chuck ROEHM ZS 160 - ID101188

390  €
Fixed price not including VAT
Submit request
Schweinfurt, GermanyGermany dealership location
6663 km
2013
good (used)
390  €
Fixed price not including VAT
Submit request
Call
Durchmesser 160 mm Aufnahme DIN 55027 / Gr. 5 Komplettsatz inkl. 1 Satz harte Bohrbacken Bquihst inkl. 1 Satz harte Drehbacken inkl. Befestigungsschrauben und Anzugsschlussel Neuwertig! more
4

Three-jaw Chuck

Ennepetal, GermanyGermany
6422 km
ready for operation (used)
Request priceCall
0yj2o7wj Dimensions approx. Three-jaw chuck Ø 310mm Passage approx. Ø 100 mm more
4

CNC Lathe with INDEXING CHUCK SPINNER TC400-52

28.000  €
Fixed price not including VAT
Submit request
Istanbul, TurkeyTurkey dealership location
8429 km
2009
good (used)
28.000  €
Fixed price not including VAT
Submit request
Call
This machine equipped with Automatic INDEXING CHUCK. Indexing chuck enable to make part machining 4 different position with one clamping. Swing dia 400 mm M3xll Turning dia 280 mm Controller Fanuc 21 Can be tested under power Price include free load on truck more
5

Chucking Automatic Lathe-Single Spindle INDEX GS 30

More Index Gs 30
Metzingen, GermanyGermany dealership location
6677 km
1990
used
Request priceCall
turning diameter 60 mm turning length 200 mm number of slides total power requirement 20 kW weight of the machine ca. t Rck2uligy dimensions of the machine ca. m more
5

Chucking Automatic Lathe KYSUCKE NOVE MESTO SEL 130

Leipzig, GermanyGermany dealership location
6734 km
used
Request priceCall
x-axis: 150-180 mm y-axis: 70-80 mm turning length: 180 mm number of slides: 2 control: SPS Tecomat NS 950 spindle diameter: 160 mm total power requirement: 12 kVA weight of the machine ca.: 2,2 t space requirement approx.:: L:2,0xB:2,0xH:2,3 m Single spindle short turning automatic (Ends-Lathing Automatic) Construction Single spindle-horizontal, for serial production of small parts Bjymx0ee Turning dia.: lateral face turning =60-140mm; longitudinal lathing=ca.160mm Swing dia.: Two cross movin... more
4

Three-jaw Chuck

Ennepetal, GermanyGermany
6422 km
ready for operation (used)
Request priceCall
Dimensions approx. Three-jaw chuck Ø 375mm R0q8fjk Passage approx. Ø 140 mm more
1

Three jaw chuck RÖHM R 200

Wiesbaden, GermanyGermany
6534 km
ready for operation (used)
Request priceCall
chuck-external Diameter: 200 mm Bctefkgivg boring: 55 mm more
2

Three jaw Chuck (24413) Röhm 130 mm Durchmesser

Tönisvorst, GermanyGermany
6366 km
excellent (used)
Request priceCall
Three-jaw Chuck Make Röhm Diameter 130 mm with key Nrobtdo more
4

jaw chuck Ø500mm Jianhua

650  €
Fixed price not including VAT
Submit request
Schwäbisch Gmünd, GermanyGermany dealership location
6701 km
ready for operation (used)
650  €
Fixed price not including VAT
Submit request
Call
Four-jaw chuck 490 mm Bblc09m7fz Passage 160 mm Weight 95 kg Condition: used 1004035 more
6

CNC 4-axis lathe chuck OKUMA LR35

12.500  €
Fixed price not including VAT
Submit request
ISERLOHN, GermanyGermany dealership location
6437 km
1991
good (used)
12.500  €
Fixed price not including VAT
Submit request
Call
4-axis CNC Chuck lathe Fabr.OKUMA type: LR35 BJ. 91 control OKUMA Foaw2swpq OSP5020L. Max turning diameter: 450 mm Turning diameter over longitudinal max sledge: 420 mm Along route Z-axis 900mm 2 Werkzeugrevoler with 12 u. 10 tool of pos. VDI50 Chuck 400 mm Forkardt Chip conveyor No tailstock. more
14

3 bake spin chuck Ø 200 mm WMW roto record DH 200 x 3 Flansch 2x Backen

140  €
Starting price not including VAT
Submit request
Seegebiet Mansfelder Land, GermanyGermany
6687 km
good (used)
140  €
Starting price not including VAT
Submit request
Call
3 jaw - chucks Manufacturer: WMW Niles DH 200 x 3 - II ROTO RECORD TGL 30 2332 n max 2400 min-1 Pnbmeyw min. 14-150 mm Max 48-150 mm incl. 1 set of inner JAWS / rotating baking incl. 1 set outside JAWS / drilling JAWS incl. flange incl. key dimensions: Outside diameter: 200 mm Total height, with flange without JAWS: 150 mm Bore: Ø 55 mm Bolt circle diameter flange: Ø 135 mm with centring mount / centrically exciting Weight: 17.7 kg Condition: used more
6

Three-jaw Chuck Forkardt F200

Ennepetal, GermanyGermany
6422 km
ready for operation (used)
Request priceCall
Three-jaw chuck Forkardt Bcps0cpo32 Dimensions approx. Diameter 200 mm Passage 50 mm more
11

Wedge bar Chucks + 4 sets of base JAWS Unbekannt 200mm

750  €
Starting price not including VAT
Submit request
Ebenweiler, GermanyGermany
6728 km
good (used)
750  €
Starting price not including VAT
Submit request
Call
Internal item No.: 18036 Bcbxj7geiw Wedge bar chucks 200 mm Maximum 4000 U/Min. Manufacturer: Not shown (probably Forkardt) + 4 sets of base JAWS (cut diagonally) 2 sets stepped JAWS 2 sets of base JAWS with soft paper bake 1 set of soft JAWS The wedge bar chucks was mounted on a hamlet can. more
6

Stationary Dreibackenfutter pneumatically Schunk PZH 210

630  €
Fixed price not including VAT
Submit request
Burgbrohl, GermanyGermany dealership location
6457 km
good (used)
630  €
Fixed price not including VAT
Submit request
Call
well preserved and properly functioning this pneumatic 210er three-jaw SCHUNK Alukoerperfutter, three-jaw Chuck Ywdxgeecd , 300 x 350 mm was on an aluminium plate .und mounted aluminium top JAWS with three elevated and rubberized Einlagepats productive in use. on the machine. Clamping pressure and speed are adjustable on the pneumatic inlet valve. today's price of the Chuck body €2800 More pictures and key data on request more
8

3 jaw chuck Power Chucks SCHUNK THW 500-128

Schwäbisch Gmünd, GermanyGermany
6701 km
as good as new (ex-display)
Request priceCall
3 jaw chuck Power Chucks Schunk THW 500-128 Quick jaw change system Condition: as new, year of manufacture unknown Ihsdmju for CNC machine Art. No. 1001794 more
3

Four-jaw Chuck WMW 250 mm

Unterweiden 108, 47918 Tönisvorst, DeutschlandGermany
6366 km
excellent (used)
Request priceCall
Four-jaw Chuck Make WMW Type Roto record Nr: DH250x4x8 Diameter 250 mm Cone diameter 130 mm Bolt circle diameter 172 mm B9r0jshy more
15

faceplate 400 mm FUP Ø 400 mm M400-ZJ

200  €
Starting price not including VAT
Submit request
Seegebiet Mansfelder Land, GermanyGermany
6687 km
good (used)
200  €
Starting price not including VAT
Submit request
Call
Professional 400 mm faceplate with recording FUP bison Poland PUTf M 400 - ZJ 71-4059 32165 incl. 4 reversible JAWS incl. spindle retainer Bcl0g9f3eg incl. key Dimensions: Outside diameter: 400 mm Total height, including jaws and recording: 215 mm Bore: Ø 100 mm Bolt circle diameter of the spindle retainer: Ø 134 mm Weight: 67 kg Condition: used more
2

Lathe with big chuck Campro CPL 3512

5531 Bladel, NederlandNetherlands
6283 km
2015
ready for operation (used)
Request priceCall
Fanuc control Oi-TD with Manual Guide i Travel 1500 for Z-axis and X-axis 275 mm Spindle speed 2000 RPM (A2-11 spindle nose) J8u9hkch Hole true spindle 117 mm 12 position Sauter (standard) turret Swing over bed 700 mm rapid traverse 24/24 m/min toolsetter high pressue pump 10 bar chip conveyor coolant gun 2 steady rest 1"-8"and 4"-12" (never used) more
3

Two jaw chucks BISON 250 mm Stahlausführung

Kassel, DeutschlandGermany
6557 km
as good as new (ex-display)
Request priceCall
Two jaw lathe Chuck serial. BISON steel Built in 2008 Cbho7g7m Technical data: Chuck diameter 250 mm Bore 75 mm with -1 set of base JAWS -1 set of soft JAWS -cylindrical flange mount -Square key unused more
4

Four-jaw chuck, face plate Ø 500 mm

Ennepetal, GermanyGermany dealership location
6422 km
used
Request priceCall
  500 mm aperture about 60 mm Height without shoes 95 mm bolt circle for mounting screws about 95 mm jaw width 50 mm Sazqlwj7e more
1

Turning fodder FORKARDT KS250

850  €
Starting price not including VAT
Submit request
ISERLOHN, GermanyGermany dealership location
6437 km
1990
used
850  €
Starting price not including VAT
Submit request
Call
Chuck Fabr.FORKARDT type: KS250 BJ. 90 for CNC lathes with flange to read- Speeds up. 2200U/min. Good condition. Pudxu3 more
4

Four-jaw Chuck Röhm 250 mm

Unterweiden 108, 47918 Tönisvorst, DeutschlandGermany
6366 km
excellent (used)
Request priceCall
Make Röhm Diameter 250 mm Bake Central and single adjustable Cone 108 mm PCD 124 mm Bb9r2ie7xu Height 115 mm more
1

faceplate 500 mm Stankoimport Ø 500 mm Stanko B T E421 I 9 iM

450  €
Starting price not including VAT
Submit request
Seegebiet Mansfelder Land, GermanyGermany
6687 km
good (used)
450  €
Starting price not including VAT
Submit request
Call
Pro - independant Chuck 500 mm with recording Stanko B T E421 I 9 in the 103-0021 Gxjktz2cy with T-slots incl. 4 reversible JAWS incl. spindle retainer incl. key Dimensions: Outside diameter: 500 mm Total height, including jaws and recording: 260 mm Bore: Ø 127 mm The spindle retainer bolt circle: diameter 173 mm Total weight: 125 kg Condition: used more
3

CNC lathe machine TRAUB TND 360

More Traub Tnd 360
12.900  €
Starting price not including VAT
Submit request
Lüdenscheid, GermanyGermany dealership location
6444 km
1989
used
12.900  €
Starting price not including VAT
Submit request
Call
Control TX8D B9l0atwe DC drive and gear, Tailstock, Swing over bed 360 mm, over cross slide 160 mm,. Turning length 800 mm more
2

3-jaw power chuck SMW HFKN-D-315-91-3-A11

850  €
Fixed price not including VAT
Submit request
BG06, Wahringerstraße 36, 4030 Linz, ÖsterreichAustria
7022 km
2010
good (used)
850  €
Fixed price not including VAT
Submit request
Call
POWER OPERATED CHUCKS THREE JAW HFKN-D-315-91-3-A11 SMW *. 8z2d7h more
4

Four-jaw chucks ROEHM Ø 250 mm

Ennepetal, GermanyGermany dealership location
6422 km
used
Request priceCall
- Passage about 60mm - 250mm Yammpi2a8 more
1

Turning fodder SMW KNC250

1.200  €
Starting price not including VAT
Submit request
ISERLOHN, GermanyGermany dealership location
6437 km
1995
used
1.200  €
Starting price not including VAT
Submit request
Call
Wedge bar power collet chucks for CNC lathes Fabr.SMW type: KNC250 BJ. 95 hollow Chuck forward. 55 mm zulessige RPM-4500 RPM L8kn0f0x Good condition. more
4

Three-jaw Chuck unbekannt unbekannt

110  €
Starting price not including VAT
Submit request
Leingarten , GermanyGermany dealership location
6639 km
used
110  €
Starting price not including VAT
Submit request
Call
Three-jaw Chuck Outside through fair: 250 mm Eildzammg Bar passage: 70 mm more
3

3 - Jaw Chuck FORKARDT F 250

690  €
Fixed price not including VAT
Submit request
Bergstraße, DeutschlandGermany
6578 km
ready for operation (used)
690  €
Fixed price not including VAT
Submit request
Call
4610 1 gebr. 3 - Backen Keilstangen Futter FORKARDT F 250 div. Wechselbacken Ncmtv Gesamtgewicht ca. 110 kg. more
6

deviding head + Forkhardt 3-jaw chuck Walter VTW 5

700  €
Starting price not including VAT
Submit request
Sonsbeck, GermanyGermany dealership location
6344 km
used
700  €
Starting price not including VAT
Submit request
Call
for sale 1 piece: dividing head, rotary table Walter VTW 5 with Forkhardt 3-jaw chuck 250 mm make: Walter type: VTW 5 top condition, checked, ready to use Guzwpc characteristics: Forkhardt 3-jaw chuck 250 mm opening bore 70 mm useable horizontally or vertically peak hight 210 mm latch every 15° weight ca. 150 kg shipping: Shipping worldwide. Please contact us for further shipping details for your desired location. more
1

3-jaw power chuck SMW KNCS-NB-500-155-3-A15

2.350  €
Fixed price not including VAT
Submit request
BG06, Wahringerstraße 36, 4030 Linz, ÖsterreichAustria
7022 km
2002
good (used)
2.350  €
Fixed price not including VAT
Submit request
Call
POWER OPERATED CHUCKS THREE JAW KNCS-NB-500-155-3-A15 SMW *. Bb9lect9zc more


4 jaw chuc...
daily

New machines via email!

Stay updated!
Save search query

to

to

Edit search
4 JAW CHUCK FOR LATHE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Find out more
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
Listing on Machineseeker
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close