Used 4 Axis Cnc Milling Machine for sale (96,997)

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM Pgodpfx Adoxz Aygonsw W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors Pgsdpew Nklhjfx Adnew - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Type: UWF 902 S Pgodsv Rxa Sopfx Adnow Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece touch-off) Vertical-horizontal milling attachment Quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH) approx.: 3,900 x 2,000 x 2,000 mm ä251125

Condition: excellent (used), Year of construction: 2017, operating hours: 2,132 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 10,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 5 h, We offer in perfect condition Hermle C400U. X-axis travel: 850 mm Pgodpjxy Itcefx Adnow Y-axis travel: 700 mm Z-axis travel: 500 mm Spindle HSK-A63 38 tools ATC Machine has Heidenhain 640 control and only 2100 running hours. Please not machine doesn't have internal coolant or chip conveyor.

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Podpfx Adsibd Alenogw Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Pedpowyit Hofx Adnsgw Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Pgodpfx Adowxz D Ujnsw Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) Pgedpstrhq Hefx Adnew - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swiveling table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Pedpfsv Rpr Sjx Adnsgw Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm ä251125

Condition: used, Mecof Bed Milling Machine, Moving Column, 9m x 2.2m Table, Angle plate 1m x 2.5 x 1.2, two sub tables 1m x 1.5m. Heidenhain 426 control Pedpfx Aexaz E Sjdnogw

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, travel distance X-axis: 15,000 mm, travel distance Y-axis: 5,150 mm, travel distance Z-axis: 2,000 mm, feed length Z-axis: 1,600 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 8 rpm, total width: 6,400 mm, total height: 10,370 mm, total length: 19,300 mm, torque: 34,300 Nm, table load: 80,000 kg, overall weight: 137,000 kg, spindle diameter: 250 mm, W250H plate drilling and milling machine with S80B rotary table 4000x3550 mm, maximum load 80,000 kg. The machine is in very good technical condition. It is in continuous operation and can be inspected while machining a component. Podpfx Adoxzzzvjnsgw

Year of construction: 1999, condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Pedpfodk Rwnox Adnsgw Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Pedpfohp Rc Iox Adnegw Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: good (used), Year of construction: 2004, weight max. 1,5 t weight of the machine ca. 400 kg Accessories for a 4th axis machining center Pgedpfx Aoxylq Ssdnsw used on a HEDELIUS machine

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: Pedpfjwhk Ubsx Adnsgw - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Year of construction: 2012, condition: used, Used machine Year of manufacture: 2012 Equipment and technical data: Axes: X-axis: - Max. workpiece length: unlimited - Min. workpiece length: 250 mm - Traverse speed: 0-25 m/min Y-axis: - Max. workpiece width: 1,000 mm - Min. workpiece width: 80 mm - Traverse speed: 0-50 m/min Z-axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 10 mm - Traverse speed: 0-20 m/min Minimum and maximum workpiece sizes depend on the weight and on the length-to-width ratio! Units: 16-fold drilling head: - Vertical spindles in X direction: 5 pcs. - Vertical spindles in Y direction: 5 pcs. - Horizontal double drilling spindle in X direction: 2+2 pcs. - Horizontal double drilling spindle in Y direction: 1+1 pcs. - Spindle spacing: 32 mm - Spindle speed: 4,000 rpm - Motor: 1.7 kW Grooving saw: - In X direction - Speed: 4,000 rpm - Max. saw blade diameter: 125 mm - Motor: 1.7 kW (Grooving saw is integrated in drilling head) Milling unit: - Speed: 1,000 to 18,000 rpm - Motor (frequency-controlled): 3.3 kW - Collet chuck: max. 25 mm - Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Extraction: - Volume: 2,000 m³/h - Air velocity: 25 - 30 m/sec - Extraction nozzle: 1 x 150 mm Software: MASTERWORK-MACHINE VERSION Required air pressure: 8 bar Air consumption: max. 750 l/min Air tables in the working area Roller table at infeed and outfeed Additional foldable roller table at infeed Panel measuring sensor Ball screw spindle and linear guides Rack and pinion drive Central lubrication DXF file import Dimensions: 1,990 x 2,410 x 1,510 mm Weight: 1,300 kg Availability: short-term Pgjdoxya Rgopfx Adnsw Location: Röllbach

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Pjdpfxevvi Spo Adnsgw

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Podpfx Asxx U Ecodnsgw

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting Pgsdsw D Hmlopfx Adnjw - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 System resolution: 0,001 mm Pedeunhy Sjpfx Adnsgw Documentation for machine

Condition: used, Year of construction: 2011, - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods on all axes - Ball screws - Hydraulic tool retractor - AC servo feed motors - Sliding doors with safety glass - Universal milling head - Hardened guideways - Plastic-coated counter guide - Electromagnet. Main spindle brake - Automatic central lubrication system - Integrated coolant system - Steel telescopic cover for transverse travel - Steel telescopic cover for longitudinal travel - Work light - Year of manufacture 2011 Specifications Worktable: - Table clamping area: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel paths: - X-axis - Longitudinal travel: 1250 mm - Y-axis - Transverse travel: 540 mm - Y-axis - Transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and column: 500 mm Column: - Z-axis - Vertical travel: 550 mm - Distance between spindle nose and table with vertical head position: approx. 50 - 600 mm - Distance between spindle nose and table with horizontal head position: approx. 360 mm 910 mm Milling spindle: - Tool holder: DIN 2080 ISO 50 Pjdpowf Ntqefx Adnegw - Speed range: 40 - 2000 rpm Feeds and rapid traverse rates: - Longitudinal/transverse feed: 4000 mm/min - Vertical movement (column): 2000 mm/min - Rapid traverse longitudinal/transverse: 4000 mm/min - Rapid traverse vertical: 2000 mm/min Motors: - Milling spindle motor: 11 kW - Feed motors for X/Y/Z axes: 1.5 kW each - Coolant pump: 0.12 kW - Lubricant pump: 12 W Installation: - Dimensions W x H x D: 3000 x 1880 x 2660 mm - Net weight of the machine: approx. 3800 kg

Condition: used, Year of construction: 2023, AJAX AJPR350 CNC Milling Machine Table Size 600mm x 163mm, X Axis Travel 350mm, Y Axis Travel 160mm, Z Axis Travel 400mm, Rapid Traverse 5m/min, Main Motor Power 3kw, Tool Changer 12 Tools, Max Table Load 50kg, Machine Weight 900kg, CNC Control Siemens 808D, Motor Type AC Servo, Spindle Taper BT30, Spindle Speed 18,000rpm, Machine Working Hours – 200 hours. S/No. 41840 (2023) Location: These lots are located in Newcastle upon Tyne, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Pgsdpfxsxzfvwe Adnow

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex CH toolmaking: 5-axis milling machine Deckel Maho Type DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Table load capacity up to 100 kg Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Pjdexzdkaspfx Adnsgw Servo motors for X/Y/Z axis Swivel range: 360 degrees Table clamping: plus 105 / minus 150 degrees Weight: 2 t Tool holders, hydraulic vice Price: EUR 5,750 plus VAT, ex location

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Podog U Uv Ujpfx Adnjgw Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: used, Year of construction: 1987, - Lid Contour 3 CNC control - Sliding vertical milling head with extendable spindle - counter bearing for long milling arbors - Hydraulic tool clamp - Automatic speed gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - coolant device - direct path measurement - Collision protection clutch in Z/Y axes - year of construction 1987 Technical data Pedpfx Adsu Awlzsnegw Working range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head can be moved on headstock: 150 mm Main drive: - Motor: pole-changing three-phase AC brake motor and manual gearbox with clockwise/anticlockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step change: 1.25 - Tool holder: SK40 (M16) - Tool clamp: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Feed speed programmable: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance from table center to screw-on surface: 260 mm - Max. Passage height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (axis C): 360 ° - Tilt range (axis A): +450 / -150 ° - Pivoting range (axis B): ± 450 ° - Measuring range with direct digital display: Resolution 360000 x 0.001 ° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Space requirement with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²