Used Elumatec Crimp for sale (137)

Year of construction: 2024, condition: like new (used), The machine is like new, the previous owner went out of business. Dcjdpey Rp D Hjfx Ac Hji

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Dcedpfx Aezgfvbsc Hsi Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Usable length: 7.6 m EQUIPMENT 12 pneumatic clamping chucks Dcsdpfx Aezhuyfec Hsi 2 work areas

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Djdszi A Uaopfx Ac Hsci Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: used, Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Dcodsywxwpepfx Ac Hji Max. push length: 3000 mm

Year of construction: 2001, condition: used, Manual length adjustment via handwheel with digital display Dcodpszh Iucsfx Ac Hsi For attachment to any Elumatec single-head saw (right) Max. insertion length: 4,500 mm Pneumatic parking brake

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 For attachment to any Elumatec single-head saw (right) Dcodpfszh Itfjx Ac Hoi Max. push length: 3000 mm

Condition: used, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Dcsdezh Irbjpfx Ac Hsi Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 550 mm, Double mitre saw Elumatec DG 142/01 Cutting length min 300, max 4500 mm Djdpfx Ajzi Uxdsc Heci Max. saw blade diameter 500 mm Pneumatic angle adjustment 45-90 degrees Digital angle display Automatic length positioning Moving roller conveyor Pneumatically foldable support arms Label printer

Year of construction: 2014, condition: good (used), The Elumatec SBZ 130 is a 3-axis profile machining center designed for efficient processing of aluminum, steel, and stainless steel profiles. All operations, such as milling, drilling, and threading, are performed on a stationary profile, which protects its surface. - Axes: 3-axis control, with a tool spindle as an additional axis. - Machining length (X-axis): 7200 mm - Travel (Y-axis): standard 485 mm (Vmax. 60 m/min) - Travel (Z-axis): standard 340 mm (Vmax. 60 m/min) - Spindle speed: standard 6000 rpm, optional high-speed spindle (18,000 rpm) - Spindle power: 5.5 kW - Tool magazine: integrated revolving tool head for 8 tools or 4 angled heads, ensuring short tool change times - Control: Windows operating system with eluCam software; 18.5" PC panel, with USB ports and network connection - Clamping system: automatic positioning of pneumatic clamps Dcodpfx Aceyt H Uye Hoi - Compressed air supply: 7 bar MACHINE: Prepared tooling dedicated to PVC and steel processing: - Tool holders, - Reducer for steel processing, - Special tools with chip breakers, - Dedicated programs for processing door profiles. The head was replaced in 2025.

Condition: used, Year of construction: 2009, Saw blade diameter 500 mm. Manual angle adjustment from 90° to 45°. Lower blade feed into the cut. 4 kW motor (400 V). Pneumatic upper profile clamping. Blade cooling and lubrication system. Extraction unit with chip collection container. Seldom used. Dodpfx Acjy Rhy Ts Heci

Condition: good (used), Year of construction: 2005, Max. sawing length: 6,000 mm Min. cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Dcedpfeyz Aa Ajx Ac Hoi Swiveling inwards and outwards 22.5° - 90° - 140° Tilting of the angle between 45 and 90 degrees Digital angle displays Moving roller conveyor Good condition - Daily use/operational Saw motors, pneumatics, and control system are functioning perfectly Inspection including test run/cutting possible Available by phone

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 Dedpfx Asvi R Avoc Hsci EU shipping - 350 euro

Condition: excellent (used), Shipping within the EU: 350 euros Dcjdpfxel Sklgo Ac Hji

Condition: excellent (used), shipping EU ~300euro Dcodpel Skk Usfx Ac Hsi

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Dedpfxsziy Idj Ac Heci Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. A stable loading device is available. Dcsdszavzvopfx Ac Hsi

Year of construction: 2013, condition: used, Max. saw blade diameter: 380 mm Stepless saw blade feed via two-hand operation Djdpozgupqjfx Ac Hsci Pneumatic material clamps Minimum quantity spray device Weight: about 350 kg

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Dsdpfx Acsxqihis Hsci Large milling area despite compact design Copy milling using side guides or templates in a 1:1 ratio Pneumatic copying stylus with two stages for two different cutter diameters The patented suspension of the copying lever guarantees precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via "spindle lock" Pneumatic material clamping device Metering spray device Options Copying templates milled to standard dowel hole and PZ milling pattern Copying stylus Collet Guide system Material clamping device with 2 clamping cylinders Milling tool 8 mm Availability: short-term Location: Röllbach

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Djdpfjzf I Uwox Ac Hsci Weight: approx. 5,000 kg New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Dsdpfozf I Ttjx Ac Heci Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Dedpozf Agzjfx Ac Hjci Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg

Year of construction: 2009, condition: excellent (used), Elumatec SBZ 140, extended version: 7.6 meters Weight approximately 5000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety guard Light curtains Automatic clamping detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Dedszhg S Topfx Ac Heci Tool holder: HSK-63F, 8-position tool changer. Max. milling diameter: 80 mm Max. sawing diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, -90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (in many configurations) Control: 4-axis CNC system, with PC control, color screen, USB & network. Software: eluCam. Automatic material clamping, automatic positioning via indexing pins Pendulum/shuttle operation (two work zones), which improves production cycle time. In addition to milling and drilling, it can also tap, saw, and perform profile machining – all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT is reclaimable for businesses).

Condition: good (used), Year of construction: 2021, machine/vehicle number: 161000228, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 280 mm, rotational speed (max.): 4,100 rpm, total length: 10,000 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 700 kg, saw blade speed: 3,200 rpm, ELUMATEC TS 161/21 Undercarriage Circular Saw - Power: 1100 W - Swivel range: 90° to 45° to the left and 90° to 0° to the right - Includes digital length stop with control unit from manufacturer HECHT, as well as a roller guide on both sides, width: 90 mm Dcjdpfx Acozdyrrs Hoi Note: The item must be collected on a fixed date of 07/02/2026, with the exact time to be agreed upon. FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 223002360, milling height: 150 mm, input voltage: 400 V, overall weight: 700 kg, total length: 1,700 mm, total width: 1,000 mm, total height: 1,600 mm, input frequency: 50 Hz, milling length: 400 mm, pivoting range: 60 °, rotational speed (max.): 2,800 rpm, ELUMATEC AF 223/01 Mortise Milling Machine - Rated current: 6.1 A - Power connection: 2500 W Djdozdyqnspfx Ac Hoci - Swivel range: up to 60° to the right and left - Max. milling depth: 110 mm - Max. profile height: 200 mm - Max. cutter diameter: 280 mm - Cutter arbor bore diameter: 40 H7 mm Note: The item must be collected on July 2, 2026, at a date to be confirmed. FCA D-73235 Weilheim Teck - loaded onto a truck.