Used Wire Reel for sale (3,770)

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bwodpfsz Adnuex Aknow

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Bwsdpfx Akozqu Hqsnow

Condition: excellent (used), Year of construction: 2026, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device Bedjxvh Hujpfx Aknsww -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Year of construction: 1997, condition: ready for operation (used), Several Wafios wire processing machines with two payoff reels are available. 1) Wafios N90, year of manufacture: 2003. Including Wafios AHL 41 D-M payoff reel, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N5. 4) Wafios AHL 41 DR wire payoff reel, year of manufacture: 1998. 5) Wafios AHL 41 D wire payoff reel, year of manufacture: 1997. All machines including payoff reel. An on-site inspection is possible. Individual sale possible. Bwsdpfx Akjy Eg Dmjnow

Condition: good (used), Module converter, electronic module Bjdjfcl H Ispfx Aknjww -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation Bsdpfxein Rn As Aknsww -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: used, Module converter, electronic module Bwsdpfsfcl H Uex Aknsw -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: good (used), functionality: fully functional, For sale is a used universal wire stapling machine, Speckbötel type FEN. This machine is particularly suitable for the production and assembly of wine crates, fruit crates, vegetable crates, and other wooden crates or wooden packaging. The staples are formed directly from the continuous wire feed from the reel within the machine. This makes the machine suitable for continuous operation in crate and packaging production. Technical data / features: Manufacturer: Speckbötel Type: FEN Manufacturing location: Hamburg Machine type: Universal wire stapling machine Design: Wire nailing machine / flat stapling machine Bjdpfxszymyne Akneww Staple formation from continuous wire Processing of wire from a reel Large work table Height-adjustable work area Handwheel for adjustment Heavy-duty and robust industrial design Suitable for the production or assembly of: Wine crates Fruit crates Vegetable crates Packaging crates other wooden crates and wooden packaging The machine is in used condition. Features and condition as shown in the photos. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be available shortly! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. Bjdpfxez N Sa Dj Akneww In 3:1 and 2:1 spacing. Sold only in whole.

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: D12L/8530, Offer Number: D12L/8530 Machinetype: wire nail press Make: WAFIOS Type: N2 Constr. year: 1978 diameter range: 0,8-1,8 mm Bjdpe Ah E Uajfx Aknoww nail length: 6,5-40 mm output - pieces/min: 800 Location: In our warehouse

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 925674, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,000 mm, total width: 1,700 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, table width: 450 mm, overall weight: 2,500 kg, table length: 680 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 18 A, controller manufacturer: AGIE CHARMILLES, nominal power (apparent): 10 kVA, GF AGIE CHARMILLES ROBOFILL 240 SLP wire erosion machine - Dimensions of the front door: 820 mm - Distance between floor and table: 1000 mm - Total volume of dielectric fluid: 760 l Bedpfxo Afufgs Aknsww - Travel range of U-axis: 350 mm - Travel range of V-axis: 220 mm - Includes workbench with matching accessories FCA D-71679 Asperg - loaded onto a truck.

Condition: used, wire electrode, welding wire, welding wire Bwsdpfx Aoimd S Hoknow -Gas wire electrode: roll started -Type: 310 Ø1.0mm -Dimension: Ø 300/100 mm -Weight reel: 13.2 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 193.006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, controller model: AGIEVISION / AGIE HSS, TECHNICAL DETAILS Travel range, X-axis: 350 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 256 mm Travel range, U/V axes: ±70 mm Positioning resolution: 0.0001 mm Bwedo Afxxzspfx Aknsw Positioning accuracy: approx. ±3 µm Max. taper: 30° at a workpiece height of 100 mm Surface quality: up to approx. Ra 0.2 µm with multiple finishing cuts Workpiece size, maximum dimensions: 750 × 550 × 250 mm Workpiece weight, maximum: 450 kg Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: used, wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308L Ø 0.8 mm -Dimension: Ø 300/100 mm -Weight reel: 9.3 kg Bodpfxoimd S Ao Akneww

Condition: used, wire electrode, welding wire, welding wire Bwedsftd Tnspfx Aknjw -Manufacturer: MTC, welding wire G 19 9 Nb Si 1.4551i -Type: MT-347 O1.2mm -Dimension: O 300/110 mm -Weight reel: 15.7 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 9-2105/331138, Equipment: cooling unit, documentation/manual, CHARMILLES ROBOFIL 290 Wire EDM Machine – 1999 Description: CHARMILLES ROBOFIL 290 CNC wire EDM machine, manufactured in 1999, designed for high-precision machining of conductive metal parts, including hardened steels, alloy steels, stainless steels, and carbides. General characteristics: - Brand: CHARMILLES - Model: ROBOFIL 290 - Year: 1999 - Type: Wire EDM machine - Control: CNC - Axes: X, Y, Z, U, and V - Wire diameter: 0.25 mm - Technology: Wire EDM cutting in a dielectric bath Characteristic | Value X-axis travel | 400 mm Y-axis travel | 250 mm Z-axis travel | 200 mm U / V-axis travel | 80 / 80 mm Maximum part dimensions | 850 × 500 × 200 mm Maximum part weight | 500 kg Taper cutting angle | ±30° over 200 mm Admissible wire diameter | 0.10 to 0.30 mm Installed power | 10.5 kVA Power supply | 400 V, three-phase Machine dimensions (L × W × H) | 1,800 × 1,600 × 2,180 mm Net weight | Approximately 2,200 kg Equipment and features - CHARMILLES numerical control. - 2D profile machining and taper cutting. - Water filtration and deionization system. - Adjustment of voltage and wire speed. - Anti-collision protection for the axes. - USB communication interface Machine available for viewing by appointment in our workshop in Sprimont, Belgium. For further information or to arrange a visit, please do not hesitate to contact us. Bode Agwbwopfx Aknjww

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 Bwedpfx Ajzgu Igsknsw operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: RM2019003, Rolling mill for flattening wire. Manufacturer: Nantong Geron Intelligent Equipment R&D Co., Ltd. Brand: GEHI Model: GZYH19004 Rolling Mill Year of manufacture: 08/2019 Serial number: RM2019003 TECHNICAL SPECIFICATIONS Supply voltage: 380 V Frequency: 50 Hz Installed power: 200 kW Working speed: 0 – 150 m/min Feed material (wire): Ø ≤ 13 mm Machine dimensions: 18,000 × 3,000 × 2,000 mm Approximate weight: 10,000 kg DESCRIPTION GEHI GZYH19004 industrial rolling mill, designed for processing wire and round materials with a diameter of up to 13 mm. High-capacity industrial machine, equipped with an installed power of 200 kW and a working speed of up to 150 m/min, suitable for industrial applications and high-volume production lines. Heavy-duty construction, with a total length of approximately 18 meters, designed for continuous industrial operation and high-speed processing. MAIN DATA Model: GZYH19004 Bwjdpfxsz Infrj Aknew Year: 2019 Power: 200 kW Speed: up to 150 m/min Material diameter: up to Ø13 mm Weight: approx. 10 tons Dimensions: 18 × 3 × 2 m

Condition: used, Year of construction: 2020, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 220 mm max. workpiece weight: 500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 90 x 90 mm working hours approx: 5973 h - Fully operational - Wire diameter: 0.10–0.30 mm - Maximum wire feed speed: 420 mm/s - Maximum wire spool size: 8 kg - Wire tension: 3–23 N Bedpfx Aks Ahq Hdeneww - Maximum cutting angle: ±15° at 120 mm workpiece height - Floor-to-table distance: 900 mm - Work tank dimensions: 860 × 690 mm - Machine dimensions: 2,020 × 2,310 × 1,990 mm - Machine weight: approx. 2,750 kg - Power supply: 11 kVA, 3-phase, 50/60 Hz

Condition: excellent (used), Year of construction: 2024, operating hours: 1,822 h, functionality: fully functional, machine/vehicle number: P2414C718, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, total height: 1,970 mm, total length: 2,120 mm, total width: 1,970 mm, wire diameter (max.): 0.253 mm, workpiece height (max.): 250 mm, workpiece width (max.): 630 mm, workpiece length (max.): 730 mm, type of input current: AC, table width: 440 mm, overall weight: 2,200 kg, table length: 626 mm, input voltage: 400 V, tank capacity: 520 l, travel speed (max.): 2,000 mm/min, input frequency: 50 Hz, input current: 32 A, positioning accuracy: 0 mm, Equipment: cooling unit, documentation/manual, The machine has undergone a general overhaul, and the water system has been cleaned. The machine is equipped with new, original precision diamond guides (0.253), new feeders, all bearings, cutting contacts, encoder batteries, parameter backups, filters and a detection unit. The system has been updated to the latest version. The machine comes with a complete set of standard accessories: flushing nozzles, wire alignment jig, clamps, etc. Bsdpfx Ao Ahhn Ijknoww

Condition: excellent (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire cutting machine (2018) in very good condition, in constant use, fully functional and ready to work – very little used (2700 hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control: Mitsubishi M700 series Axis travel range: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1050 × 800 × 295 mm Max. workpiece weight: 1500 kg Worktable: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 µm Power supply and cooling – complete, functional Machine dimensions: 2687 × 3030 × 2150 mm Weight: approx. 3500 kg Equipment and accessories: Original wire guides - upper and lower Automatic Wire Threading (AWT) Filter tank with ion exchange resin Complete set of mounting and supporting devices (in a carrying case) Wire alignment device Original documentation and operating manuals Additional equipment purchased for over €10,000: Wire guides for angle cutting - upper and lower 30 degrees Processor battery Precision vice for clamping workpieces 0-600 PSI pressure gauge - 2 pcs MV power contact (259320) - 2 pcs Nlsbiawhcsxu Hvleloa CF card with software 0.25 mm EDM wire - 3 new spools 2 sets of new filters Machine transport and handling system. Machine Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Filtration and cooling systems are included. Bjdpfxj Agggyj Aknjww We can assist with transport, setup, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price is negotiable. I will issue a VAT invoice, export 0%.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm Bwsdpfxoz Az Uve Aknjw - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control Bwedpfoz R Rpbjx Aknsw • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: D06E/8463, Offer Number: D06E/8463 Machinetype: wire and strip bending machine Make: BIHLER Type: GRM100 Constr. year: 1993 wire diameter range: 10 mm width of band: 100 mm feeding length: 250 mm Location: Europe Bjdpfx Akoyya Nxonoww

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: MV2400R, workpiece weight (max.): 1,500 kg, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 305 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, table width: 640 mm, overall weight: 3,850 kg, table length: 840 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 310 mm, input voltage: 220 V, input frequency: 50 Hz, input current: 35 A, Equipment: cooling unit, documentation/manual, Technical Specifications – Mitsubishi Electric MV2400R Control Unit Control System Manufacturer: Mitsubishi Axis Strokes Number of axes: 3 Bsdpez Sp Udefx Aknsww Technical Features Maximum taper angle: 15° / 260 mm Required compressed air: 0.5 MPa, 75 l/min PC technology with a 15-inch color LCD touchscreen and mouse Electronic hand-held control unit Support for 2D/3D CAM processing Graphical verification of machining Machine Capacity Max. taper angle 15° / 260 mm Machine Description This 3-axis wire EDM machine, Mitsubishi Electric MV2400R, was manufactured in 2013. It is equipped with a PC control unit featuring a 15-inch LCD touchscreen and supports 2D/3D CAM and graphical verification of machining. Condition The machine is still connected to the power supply and energized.