Used Wire Winder for sale (3,247)

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Credpez Adnuefx Aiioi

Condition: ready for operation (used), Year of construction: 2018, Komax Wire Kappa 310 Automatic Cable Cutting and Stripping Machine Year of manufacture: 2018 Cable cross-section, stranded conductor: 0.02-6mm² Max. outer diameter: 10mm Length accuracy: ±(0.2%+1mm) Cable length range: 1mm-700000mm Max. cable transport speed: 4.0m/s Quantity range: 1-99999 Max. stripping lengths: Full stripping: Side 1: 100mm Side 2: 40mm Partial stripping: Side 1: 999.9mm Side 2: 999.9mm Multiple stripping: Side 1: 999.9mm Side 2: 999.9mm Dimensions: 465mm x 460mm x 385mm (W x D x H) Weight: approx. 25 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Crsdj Ah Rhmopfx Aiiei Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. Codpfxez N Sa Do Aiijri In 3:1 and 2:1 spacing. Sold only in whole.

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit Crjdpfx Aozzz R Doiioi - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: good (used), Year of construction: 1954, wire dia. . mm wire length . mm Cedpo Ah Id Nofx Aiisri pulling capacity 7 t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: D12L/8530, Offer Number: D12L/8530 Machinetype: wire nail press Make: WAFIOS Type: N2 Constr. year: 1978 diameter range: 0,8-1,8 mm nail length: 6,5-40 mm output - pieces/min: 800 Crsdpfx Aio Ah E Uasiei Location: In our warehouse

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 925674, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,000 mm, total width: 1,700 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, table width: 450 mm, overall weight: 2,500 kg, table length: 680 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 18 A, controller manufacturer: AGIE CHARMILLES, nominal power (apparent): 10 kVA, GF AGIE CHARMILLES ROBOFILL 240 SLP wire erosion machine - Dimensions of the front door: 820 mm - Distance between floor and table: 1000 mm - Total volume of dielectric fluid: 760 l Credpfxj Afufgj Aiisi - Travel range of U-axis: 350 mm - Travel range of V-axis: 220 mm - Includes workbench with matching accessories FCA D-71679 Asperg - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW Crodpfxszycakj Aiiji - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 9-2105/331138, Equipment: cooling unit, documentation/manual, CHARMILLES ROBOFIL 290 Wire EDM Machine – 1999 Description: CHARMILLES ROBOFIL 290 CNC wire EDM machine, manufactured in 1999, designed for high-precision machining of conductive metal parts, including hardened steels, alloy steels, stainless steels, and carbides. General characteristics: - Brand: CHARMILLES - Model: ROBOFIL 290 Cedps Agwbwsfx Aiiori - Year: 1999 - Type: Wire EDM machine - Control: CNC - Axes: X, Y, Z, U, and V - Wire diameter: 0.25 mm - Technology: Wire EDM cutting in a dielectric bath Characteristic | Value X-axis travel | 400 mm Y-axis travel | 250 mm Z-axis travel | 200 mm U / V-axis travel | 80 / 80 mm Maximum part dimensions | 850 × 500 × 200 mm Maximum part weight | 500 kg Taper cutting angle | ±30° over 200 mm Admissible wire diameter | 0.10 to 0.30 mm Installed power | 10.5 kVA Power supply | 400 V, three-phase Machine dimensions (L × W × H) | 1,800 × 1,600 × 2,180 mm Net weight | Approximately 2,200 kg Equipment and features - CHARMILLES numerical control. - 2D profile machining and taper cutting. - Water filtration and deionization system. - Adjustment of voltage and wire speed. - Anti-collision protection for the axes. - USB communication interface Machine available for viewing by appointment in our workshop in Sprimont, Belgium. For further information or to arrange a visit, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: cooling unit, documentation/manual, FANUC Robocut α-C400iB 31i WB HMI Complete with RENISHAW part probe Hammer for removing swarf Spatula for collecting swarf Crodpfo Ah T Rwox Aiioi Robot interface for unattended machining Door with automatic (opening) descent • CNC Fanuc 31i-WB • Z-axis controlled by CNC • Wire driving unit with automatic threading AWF2 • 15” ‘touch screen’ display and portable keyboard • Automatic water level adjustment • Dielectric fluid filtration system • Fanuc cooling unit • Three-phase 380/220V 15 kVA transformer MANUALS TECHNICAL SPECIFICATIONS: Maximum workpiece size (mm)……………..……………730 x 630 x 250 Maximum workpiece weight (kg) ……………..………….500 Travel of X and Y axes (mm) ……………..……400x 300 Travel of Z axis (mm) ……………...…255 Travel of U and V axes (mm)…………….. ………..120 x 120 Maximum taper angle (°/mm)……………. 30°/80 Minimum incremental step of drives (mm)……………..……………..…0.0001 Wire diameter (mm)…………….……0.10/0.30 Maximum wire weight (kg)…………….……………..……………..……..16 Footprint (W/D) (mm)…………….……………..1930 x 2330 Machine weight (approx.) (kg)…………….…………….1800 Control…………….……………..FANUC 31i-WB Program memory size (MB)…………….……………...4 Generator AC ……………..standard Pulse generator ……………fully transistorized Maximum cutting speed …………….330 mm2/min (brass wire Ø 0.3 mm) Minimum surface roughness …………….Standard 0.3 Ra (OPTIONAL 0.1 RA for superfine finishing) Dielectric system ……………..……………Deionized water Tank capacity (liters)…………….……………..……………520 Filters ……………2 paper filters Machine weight …………….1800 kg FANUC Robocut α-CiB Series 31i WB Machine features High precision: New high-rigidity structure with thermal insulation. Symmetrical pyramid structure with a wide base to eliminate load overhang Lower guide support with thermally isolated arm Tank with hermetic pre-closure device (patented) Servo control of the water level in the working tank (follows the position of the Z-axis) Transparent sealing plate in two partitions for easy inspection and maintenance Economic efficiency: Long service life of wear parts Low operating costs Minimum footprint for installation Energy consumption monitoring User friendly: Numerical control of the latest generation FANUC 31i WB 15” ‘touch sensor’ LCD screen with Teach pendant USB I/O for data and programs System features to increase machining speed and precision New concept Skim Cutting Power Supply SF2 generator for finishing with Ra 0.3µm on tool steels with a thickness of up to 60 mm Patented AIP2 (artificial intelligence) discharge pulse control High-speed servo control (direct and not through the CNC) Machining of variable thickness shapes optimized thanks to AIP2 pulse control

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP Crsdjzgu Igopfx Aiiji year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 193.006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, controller model: AGIEVISION / AGIE HSS, TECHNICAL DETAILS Travel range, X-axis: 350 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 256 mm Travel range, U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Max. taper: 30° at a workpiece height of 100 mm Surface quality: up to approx. Ra 0.2 µm with multiple finishing cuts Workpiece size, maximum dimensions: 750 × 550 × 250 mm Workpiece weight, maximum: 450 kg Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading Crsdpfe Afxxzox Aiiji

Condition: excellent (used), Year of construction: 2024, operating hours: 1,822 h, functionality: fully functional, machine/vehicle number: P2414C718, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, total height: 1,970 mm, total length: 2,120 mm, total width: 1,970 mm, wire diameter (max.): 0.253 mm, workpiece height (max.): 250 mm, workpiece width (max.): 630 mm, workpiece length (max.): 730 mm, type of input current: AC, table width: 440 mm, overall weight: 2,200 kg, table length: 626 mm, input voltage: 400 V, tank capacity: 520 l, travel speed (max.): 2,000 mm/min, input frequency: 50 Hz, input current: 32 A, positioning accuracy: 0 mm, Equipment: cooling unit, documentation/manual, The machine has undergone a general overhaul, and the water system has been cleaned. The machine is equipped with new, original precision diamond guides (0.253), new feeders, all bearings, cutting contacts, encoder batteries, parameter backups, filters and a detection unit. The system has been updated to the latest version. The machine comes with a complete set of standard accessories: flushing nozzles, wire alignment jig, clamps, etc. Credpfxe Ahhn Ij Aiiei

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, Crjdpfx Aozzwrkeiiei For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours.

Condition: used, Year of construction: 2014, operating hours: 21,476 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 510 mm, We offer this used AGIE Charmilles CUT 400 SP wire erosion machine, manufactured in 2014. Type: CUT 400 SP Serial number: 001.018 Year of manufacture: 2014 Technical data: Travel ranges (X/Y/Z): 750 x 500 x 510 mm High-precision machining with excellent surface quality Automatic wire threading system (AWT) Modern CNC control with intuitive operation Stable machine construction for maximum accuracy Year of manufacture: 2014 Condition & Equipment: Cjdpfxjz A R H Uj Aiieri Regularly maintained Fully functional and ready for use Inspection and test run possible upon agreement Special features: Due to the large travel ranges, the machine is particularly suitable for larger workpieces and versatile applications in single-piece and series production. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg Crjdpez Az Uvsfx Aiiji - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Year of construction: 2026, condition: new, functionality: fully functional, Winder with traverse guide, for different bobbin sizes, traverse width and speed are adjustable, plug in and play Ideal for small tubes, welding wire and filaments MADE in GERMANY Crodpfx Aiedv N Egeiei

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm (including KIT 70) Wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for comfortable setup Including AGIESETUP 3D Including automatic wire changer AWC (using 2 wire spools) Cjdpj Ah D U Ajfx Aiieri VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has already been completely cleaned, overhauled, and thoroughly tested. You will receive a 6-month warranty on the machine. We would also be happy to perform an individual test for you on the CUT 3000. Includes operator training at Techma on your overhauled machine. We would also like to offer you the following options: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: excellent (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire cutting machine (2018) in very good condition, in constant use, fully functional and ready to work – very little used (2700 hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control: Mitsubishi M700 series Axis travel range: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1050 × 800 × 295 mm Max. workpiece weight: 1500 kg Worktable: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 µm Power supply and cooling – complete, functional Machine dimensions: 2687 × 3030 × 2150 mm Weight: approx. 3500 kg Equipment and accessories: Original wire guides - upper and lower Automatic Wire Threading (AWT) Filter tank with ion exchange resin Complete set of mounting and supporting devices (in a carrying case) Credpo Agggyofx Aiioi Wire alignment device Original documentation and operating manuals Additional equipment purchased for over €10,000: Wire guides for angle cutting - upper and lower 30 degrees Processor battery Precision vice for clamping workpieces 0-600 PSI pressure gauge - 2 pcs MV power contact (259320) - 2 pcs Nlsbiawhcsxu Hvleloa CF card with software 0.25 mm EDM wire - 3 new spools 2 sets of new filters Machine transport and handling system. Machine Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Filtration and cooling systems are included. We can assist with transport, setup, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price is negotiable. I will issue a VAT invoice, export 0%.

Condition: used, Year of construction: 2016, weight of the machine ca. 5200 kg Codpfxj Ahklmj Aiiori

Condition: used, Year of construction: 2020, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 220 mm Crsds Ahq Hdspfx Aiioi max. workpiece weight: 500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 90 x 90 mm working hours approx: 5973 h - Fully operational - Wire diameter: 0.10–0.30 mm - Maximum wire feed speed: 420 mm/s - Maximum wire spool size: 8 kg - Wire tension: 3–23 N - Maximum cutting angle: ±15° at 120 mm workpiece height - Floor-to-table distance: 900 mm - Work tank dimensions: 860 × 690 mm - Machine dimensions: 2,020 × 2,310 × 1,990 mm - Machine weight: approx. 2,750 kg - Power supply: 11 kVA, 3-phase, 50/60 Hz

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, Two machines for the price of one. One machine is fully operational and in good condition for its age, equipped with a collecting system (sliding slats), and the other can be made operational again with minimal effort, but the new owner can also use it for spare parts (all electrical boards are intact; the pump system and wiring system require repair). The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision engineering of the German Matra machine tool manufacturer. Crodpfxszcww Rj Aiioi The machines can also be purchased separately upon request. Machine requiring repair: €1500; Operational machine: €4500.

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: RM2019003, Rolling mill for flattening wire. Manufacturer: Nantong Geron Intelligent Equipment R&D Co., Ltd. Brand: GEHI Model: GZYH19004 Rolling Mill Year of manufacture: 08/2019 Serial number: RM2019003 Cedpfx Aisz Infreiori TECHNICAL SPECIFICATIONS Supply voltage: 380 V Frequency: 50 Hz Installed power: 200 kW Working speed: 0 – 150 m/min Feed material (wire): Ø ≤ 13 mm Machine dimensions: 18,000 × 3,000 × 2,000 mm Approximate weight: 10,000 kg DESCRIPTION GEHI GZYH19004 industrial rolling mill, designed for processing wire and round materials with a diameter of up to 13 mm. High-capacity industrial machine, equipped with an installed power of 200 kW and a working speed of up to 150 m/min, suitable for industrial applications and high-volume production lines. Heavy-duty construction, with a total length of approximately 18 meters, designed for continuous industrial operation and high-speed processing. MAIN DATA Model: GZYH19004 Year: 2019 Power: 200 kW Speed: up to 150 m/min Material diameter: up to Ø13 mm Weight: approx. 10 tons Dimensions: 18 × 3 × 2 m

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: MV2400R, workpiece weight (max.): 1,500 kg, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 305 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, table width: 640 mm, overall weight: 3,850 kg, table length: 840 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 310 mm, input voltage: 220 V, input frequency: 50 Hz, input current: 35 A, Equipment: cooling unit, documentation/manual, Technical Specifications – Mitsubishi Electric MV2400R Control Unit Control System Manufacturer: Mitsubishi Axis Strokes Number of axes: 3 Technical Features Maximum taper angle: 15° / 260 mm Cedpfx Aioz Sp Udeijri Required compressed air: 0.5 MPa, 75 l/min PC technology with a 15-inch color LCD touchscreen and mouse Electronic hand-held control unit Support for 2D/3D CAM processing Graphical verification of machining Machine Capacity Max. taper angle 15° / 260 mm Machine Description This 3-axis wire EDM machine, Mitsubishi Electric MV2400R, was manufactured in 2013. It is equipped with a PC control unit featuring a 15-inch LCD touchscreen and supports 2D/3D CAM and graphical verification of machining. Condition The machine is still connected to the power supply and energized.

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: D12L/8008, Offer Number: D12L/8008 Machinetype: wire nail press Make: WAFIOS Type: N4 Constr. year: 1975 diameter range: 1,8-3,4 mm nail length: 10-80 mm output - pieces/min: 550 Location: In our warehouse Credpox Iggtjfx Aiiei