Used Wire Pin for sale (8,423)

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 Tsdpjuhxqmefx Acnsb diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : 1x Wafios S150 2X Wafios S120 1x Kovopol THA 60 1X Kovopol THA 100 Tedpevfc A Tjfx Acnjb 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Complete nail making plant in good working condition !! wire output - min. 2,5 mm

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Tsdpfx Ajzu Hxgocneb

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D12U/8492, Offer Number: D12U/8492 Machinetype: wire nail press Make: WAFIOS Type: N61 Constr. year: 1994 wire diameter: 3,1-5,2 mm nail length: 13-150 mm Tjdpfxszd U Rio Acnjb capacity - pieces/min: 370 Location: Outside of Europe

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Tedpfowi Ubnsx Acnob Make: WAFIOS Type: S110 Constr. year: 1970 diameter range: 2,2-3,8 mm nail length: 13-110 mm output - pieces/min: 350 Location: In our warehouse

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Tjdpoib H U Defx Acnsb Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Documentation and wiring diagrams are available

Condition: used, CNC Wire EDM Machine AccuteX AU-1000iA | Year 2007 | Large-Scale For sale: a professional, reliable, large-scale wire EDM machine from the renowned Taiwanese manufacturer AccuteX, model AU-1000iA. This machine is ideal for machining large and heavy parts, producing injection molds, dies, and tools with the highest precision. TECHNICAL SPECIFICATIONS: - Manufacturer: AccuteX - Model: AU-1000iA - Year of manufacture: 2007 - CNC control: Proprietary AccuteX (Windows CE) - Working travels (X × Y × Z): 1100 × 650 × 400 mm - Travels in cone axes (U × V): 150 × 150 mm - Cone cutting angle: ±21° (for height H=100 mm) - Maximum workpiece weight: up to 5000 kg (fixed table design, moving column) - Supported wire diameters: 0.15 - 0.33 mm - Machining type: Submerged KEY FEATURES AND BENEFITS: - T-Base construction: Extremely stable body made of Meehanite castings, damping vibrations and resistant to thermal and mechanical loads. - Optical (glass) linear scale system guaranteeing repeatability and positioning accuracy at the micro scale. - Original AccuteX Wire Alignment Device for wire centering/positioning (in a dedicated box with wiring). INCLUDED WITH THE MACHINE – A RICH SET OF AUXILIARY EQUIPMENT: Tjdpfx Aezt Sinjcnob - Professional set of EDM clamping elements: numerous clamps, clamping jaws, positioning screws, and pins. - Precision strips and base beams for quick mounting of large parts and molds on the work table. - Additional consumable accessories and wire guiding mechanism components.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Todpfx Acor Nfvmjnsb Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, Scott HST Mixer Model 2496 Continuous High Intensity Mixer with liquid injection. Extremely versatile blender employed for a wide range of duties, including: • Mixing of dry powders • Liquid addition to dry powders • Agglomeration (with additional of liquid binder) Tedpfxszvgmms Acnob • Coating Adjustable paddles to control retention time. Large access doors for ease of cleaning. Installed Power – 45 kW. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm Tjdpfx Acezgu Igjnsb max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Makinesi (Wire Tjdpfxszxrh Ue Acnjb EDM)

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8458, Offer Number: D12L/8458 Machinetype: wire nail press Make: WAFIOS Type: S75 Constr. year: wire diameter: 1,8-3,1 mm Tjdpfx Aoy Rz Ttocnsb nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,050 mm, total length: 2,800 mm, total width: 2,200 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servomotors Glass scales in X and Y axis Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Todszhvhdepfx Acnob Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was dismantled due to lack of need and was not in operation. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 220 x 280 x 205 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Tedpfx Asznvibjcnsb Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 23726

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder Todpfx Acjx I H Rxonob -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm Tsdex I E U Aopfx Acnsb -Weight: 7.1 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table load: 1,000 kg, positioning accuracy: 0.001 mm, FOR SALE: 2017 Model Sodick AG600L Wire EDM Machine - Full Equipment & High Performance Machine Condition: Flawless, Problem-Free, Very Low Operating Hours Model Year: 2017 Power and Generator Technology: Advanced SPW (Smart Pulse) Generator: Thanks to Sodick's special discharge technology, it provides high-speed cutting while saving energy. High-Speed ​​Cutting Circuits: Reinforced generator system that increases performance by 30%, especially in thick parts and hard metals. Extra Finishing Circuit: Optimized precise energy output to achieve very low surface roughness (Ra below 0.78 µm). Equipment and Peripherals: High-Capacity Cooling Unit (Chiller): Prevents thermal expansion by keeping the dielectric water temperature constant during precise cuts and maintains micron accuracy. Advanced Filtration System: Uninterrupted production with a long-lasting and high-flow filtration tank. Automatic Water Level Control: Automatically adjusts the tank level according to the workpiece height. Power Supply (UPS/Regulator): Integrated protection systems that protect sensitive electronics against voltage fluctuations. Tsdpfx Acezwd A Uenob Technical Summary: Drive System: Maintenance-free, linear motors (X, Y, U, V) with a 10-year precision guarantee. Axes: 600 x 400 x 350 mm working area. AWT: "Super Jet" high-speed underwater automatic wire threading unit. Control: 15" Touchscreen LN2 CNC unit. Description: The machine was used in one of Türkiye's leading precision mold shops, solely for ejector and insert cutting. It was not used in subcontracting. It is a ready-to-use machine with no accidents or need for revisions, and has been maintained regularly.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Paper punching machine (for creating perforations) for WIRE-O spiral binding. The device is designed for continuous operation and heavy-duty use. The machine has 2 tools for punching 3:1 holes, 4x4 mm square. After the holes are punched, the sheets fall onto a collecting table at the end of the machine. Quick and easy tool change (5 minutes). Maximum sheet size for punching: 550x500 mm, minimum 150x150 mm. Power supply: 1.5 kW, dimensions: 2800x1200x1250 mm, net weight: 950 kg. Tedpezuzxhefx Acnob A video demonstrating the machine's operation can be sent upon request.

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin Tjdpfsx I Icvex Acnsb -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Condition: used, Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, overall weight: 3,300 kg, input voltage: 400 V, For sale is a well-maintained CNC wire erosion machine, Charmilles Robofil 440 SL (CT-Millennium control), manufactured in 2002. The machine was used regularly in our production process and has been serviced accordingly. It is being sold due to capacity reasons. Travel ranges: X=550, Y=350mm, Z=400mm Max. workpiece dimensions: 1200mm x 700mm x 400mm Taper cutting device: 30 degrees Wire spool capacity: 16/25 kg Work tank door with viewing window Tjdpjzvw Ibjfx Acnsb Water bath machine Automatic wire threading Includes wire aligner.

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, Equipment: cooling unit, documentation/manual, Sodick AQ 300 L operating hours: 16906 year of manufacture: 2007-11 linear servo control Tsdjzgu I Tepfx Acnjb x, y, z 300 x 200 x 200 mm u, v 80 mm wire diameter 0.15-0.3 mm (0.25 mm installed) max. workpiece dimensions 740 x 440 x 200 mm (x, y, z) max. workpiece weight: 300 kg chiller deionization cartridge complete documentation machine is powered on for inspection

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this good Bihler GRM 80 punching and bending machine, year of construction 1989. with 5 slides, 30T press, straightener, feeder Tjdpfx Acsywty Eensb with decoiler Tooling is not included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2001, - Number of axes: 5 - X-axis travel: 350 mm - Y-axis travel: 250 mm - Z-axis travel: 256 mm - Voltage: 3 × 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Workpiece size is limited to 750 x 550 x 256 mm and 400 kg No documentation available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Todozxq Iyjpfx Acneb Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please use the contact form.

Condition: used, Year of construction: 1970, für MK3 Tjdpfx Acsztfzdsnob weight of the machine ca. 4 t

Condition: used, Year of construction: 1970, für MK3 Tedpfx Acoztfy Tonjb weight of the machine ca. 4 t