Used Agie for sale (147)

Condition: excellent (used), Year of construction: 2005, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, Control system: AGIEVISION Table dimensions: 600 x 450 mm Max. table load: 400 kg Max. travel ranges: 350 x 250 x 350 mm (X/Y/Z) 28-position tool magazine C-axis integrated: 60 RPM CO2 extinguishing system Year of manufacture: 2005 Approx. 16,000 erosion hours Tsdpszk Ibzsfx Amrjc The machine is fully functional, ready for operation, and connected.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Tjdezr D Dnjpfx Amrsc

Condition: used, Year of construction: 2007, Osa X 350 mm Osa Y 250 mm Osa Z 350 mm Tsdezqr Ryepfx Amrsc Table 600 x 450 mm Max. workpiece length 650 mm Max. workpiece width 420 mm Max. workpiece height 250 mm Workpiece height 400 kg Machine dimensions 1930×2690×2620 mm Weight 2700 kg

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Todpfx Ajz Affnjmroc Weight: 422 kg Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. Todpfx Amoy Snm Nsrjc A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: excellent (used), AGIE – CNC wire electrical discharge machining (EDM) machine – AGIEMATIC CF20 / AGIEPULS MMD / DA-15/TP For sale, a complete industrial CNC wire EDM machine from AGIE, manufactured in Switzerland. The machine is designed for the precise cutting of metal components using the wire EDM process. The offered set includes: - AGIE AGIEMATIC CF 20 – CNC control - AGIEPULS MMD – pulse generator for EDM - AGIE DA-15/TP – dielectric preparation and circulation unit - working fluid filtration system - cooling unit - pumps and auxiliary equipment - complete set of cabinets and accessories as shown in the pictures Device data from the nameplates: AGIEMATIC CF 20 - series: 465 - device: 004 - weight: 280 kg - power supply: 3 × 380 V - 50/60 Hz - power: 1.2 kVA AGIEPULS MMD - series: 436 - device: 001 - weight: 415 kg - power supply: 3 × 380 V - 50/60 Hz - power: 10 kVA DA-15/TP - series: 228 - device: 004 - weight: approx. 420 kg - power supply: 3 × 380 V - 50 Hz Tjdpfx Amez Et Ruorsc - power: 4.8–6.9 kVA Manufacturer: AGIE, Switzerland. The machine is a complete set with the original AGIE control, generator, and dielectric system. Condition: used, condition as shown in the pictures. Inspection on-site is possible. Before purchasing, it is possible to verify the completeness of the equipment.

Condition: good (used), Year of construction: 1995, CNC Wire EDM Machine AGIE AGIECUT 270 SF+F HSS Year of manufacture: 1995 Travel in X-axis: 350 mm Tedpozzyhnefx Amrsc Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, max. dimensions: 750 × 550 × 250 mm Workpiece weight, max.: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: good (used), Year of construction: 1995, NC sinker EDM machine AGIE AGIETRON INTEGRAL 2 Year of manufacture: 1995 Travel in X: 350 mm Travel in Y: 250 mm Travel in Z: 350 mm Rapid traverse: approx. 720 mm/min Axes: 4 (X, Y, Z, C) Work area Table size: 600 × 450 mm Maximum workpiece dimensions: approx. 860 × 620 × 350 mm Maximum workpiece weight: 400 kg Maximum electrode weight: 100 kg Internal dimensions of the work tank: approx. 830 × 590 × 350 mm Distance from table to quill: 170 – 520 mm Tjdpfx Amozzyhuoroc MACHINE DETAILS Control: AGIEMATIC T Generator: AGIEPULS 60 Power connection: 400 V / 50 Hz Dimensions & Weight Dimensions (L x W x H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Todsy Irdkopfx Amrec

Condition: good (used), Year of construction: 2001, - Number of axes: 5 - X-axis travel: 350 mm - Y-axis travel: 250 mm - Z-axis travel: 256 mm - Voltage: 3 × 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Workpiece size is limited to 750 x 550 x 256 mm and 400 kg No documentation available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Tjdpfezxq Iysx Amrec Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please use the contact form.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, total height: 2,580 mm, total width: 3,350 mm, overall weight: 3,200 kg, product length (max.): 1,630 mm, number of axes: 3, This 3-axis AGIE AGIETRON INTEGRAL 2 was manufactured in 2006. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 350 mm in the Z-axis. The machine can accommodate workpieces up to 840 x 670 x 250 mm and has a maximum electrode weight of 100 kg. If you are looking to get high-quality die-sinking capabilities, consider the AGIE AGIETRON INTEGRAL 2 machine we have for sale. Contact us for further details. • Units available: 2 • Workpiece size: 840 x 670 x 250 mm • Weight: 400 kg • Number of electrodes: 28 Todpfx Amez D Uwaerec • Max. electrode weight: 100 kg • Circuit diagram: 625942.8 • Electrical: 3 × 400 V, 50 Hz, 6.1 kVA, 8.8 A

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible. Tedjy N Uwiepfx Amroc

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example. Tsdpezhnrusfx Amroc

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg Tedpfxew Spa Nj Amrjc control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: excellent (used), Table 600 x 450 mm Work piece 650 x 580 x 250 mm Todpfozi Nnmsx Amroc Work piece weight max. 400 kg C-axis spindle speeds 60 rpm With pallets changer With tool changer Working head for 3 dimensional operation Misc. accessories MARCELS MASCHINEN AG

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible. Tsdpfxoxwyv Ro Amroc

Condition: used, Year of construction: 2008, Diesinking / EDM Travel distance X: 550 mm Todpfx Amew Ektfsrjc Travel distance Y :400 mm Travel distance Z: 350 mm table size X: 700 mm table size Y: 500 mm max. electrode weight: 80 kg max. workpiece weight: 1000 kg tool changer: 5 -time cooler C-Axis

Condition: used, Year of construction: 2003, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :250 mm Tjdpfx Amsw Ekr Ijroc Travel distance Z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 450 kg with AWF ( Automatic Wire Feeding )

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is Todpot Hxbkjfx Amrec cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 2002, condition: ready for operation (used), Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of work bowl: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filling weight: approx. 4200kg, control: AgieVision. Documentation available. Tedpjr Nd Enjfx Amroc

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible. Tedpevc Ha Rsfx Amroc

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 256 mm max. workpiece size X: 750 mm Tjdewf I Imopfx Amroc max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 200 kg submerged cooling unit The machine has been serviced annually by the manufacturer.

Year of construction: 1995, condition: ready for operation (used), Generator: Agiepuls 60 HSF, travel X/Y/Z: 350mm/250mm/350mm, table dimensions X/Y: 600mm/450mm, max. workpiece weight: 400kg, max. workpiece dimensions X/Y/Z: 840mm/600mm/250mm, max. electrode weight: 100kg, machine dimensions X/Y/Z: approx. 2450mm/1750mm/3000mm, weight: approx. 4000kg. The machine has PCB damage. Documentation available. An on-site inspection is possible. Tedeyugmfjpfx Amrjc

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Tjdoy Ed E Iepfx Amroc Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 430 mm Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 400 kg, controller model: AGIEMATIC T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 350 mm Rapid traverse: approx. 720 mm/min Axes: 4 (X, Y, Z, C) Working area Tsdpfx Aszpypnsmrjc Table size: 600 × 450 mm Workpiece dimensions max.: approx. 860 × 620 × 350 mm Workpiece weight max.: 400 kg Electrode weight max.: 100 kg Working tank (internal): approx. 830 × 590 × 350 mm Distance from table to quill: 170 – 520 mm MACHINE DETAILS Control system: AGIEMATIC T Generator: AGIEPULS 60 Power connection: 400 V / 50 Hz Dimensions & weight Dimensions (L x W x H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg