Used Agie Evolution for sale (103)

Condition: used, Year of construction: 1997, x-travel 350 mm y-travel 250 mm z-travel 256 mm max. size of workpiece 750 x 550 x 250 mm U-axis +/- 70 mm V-axis +/- 70 mm rapid traverse X/Y/Z axis 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis 0,6 m/min max. concentricity 30° / 100 mm control AGIEVISION wire dia. 0,1 - 0,33 mm speed of wire 60 - 300 mm/sec wire retraction halbautomatisch total power requirement 9,1 kVA weight of the machine ca. 3,6 t dimensions 2,21 x 2,21 x 2,22 m Bn8P99Ba328

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, AGIECUT Vertex 3 Year of construction 2010 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION 5 control unit AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is completely cleaned, overhauled and thoroughly tested after receipt of the order. A laser measurement of the axes is carried out at our premises. We would also be happy to carry out an individual test on the Vertex 3 for you. Cm8Un7Qg3M Incl. user training at Techma on your overhauled machine We are happy to offer you an optional service: - transportation - commissioning - Cooling unit - Clamping devices - Consumables

Condition: used, Year of construction: 2005, Travel distance X: 350 mm Travel distance Y :250 mm Travel distance z: 256 mm Pj3Kvn9Upl Taper 30° at height 100 mm

Condition: good (used), Year of construction: 2004, Well-maintained AgieCharmilles fixed-hole drilling machine that works reliably. Control unit: VDF Monitor All travel speeds and the high-pressure pump can be controlled via the interface keypad. Technical data: Cgx9Hir2Hi Travel range X 300 mm, Y 200 mm, Z 300 mm, auxiliary axis (manual) 100 mm Bore diameter range 0.3 -3 mm Maximum depth 200 mm Work table: Dimensions 500 mm x 300 mm Max. Workpiece weight 300 kg Machine data: Dimensions 1,340 mm x 900 mm x 1,940 mm Total weight 1,200 kg Power supply: 400 V, 50 Hz, 4 kVA This machine does not include a dielectric unit (the SD1 was supplied centrally)! An existing new unit can be supplied on request.

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. Cgnyku20Js X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight approx. 2600 kg.

Condition: good (used), Year of construction: 2007, The machine is in good technical condition, after previous agreement the possibility of testing. Ckg7Nxc0Oq

Condition: used, Year of construction: 2002, operating hours: 89,683 h, Functionality: fully functional, Wire erosion machine AGIE Classic 3 , year of construction 2002 , data see picture in the appendix / type plate. Cjhhg9X7Kg The machine is currently still in operation - therefore the operating hours will increase. Current eroding hours: 24609, operating hours: 89683 Machine is sold without guarantee and warranty, no return.

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic V2 Year of manufacture 2007 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Cm8Qwwz32E Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator AGIEVISION 5 control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg The machine is cleaned and overhauled by us after receipt of the order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2002, Condition: ready for operation (used), Control Unit Brand AGIE Model AGIEVISION control system Main Drive Number of axis 3 Movement Z-Axis Movement 350 mm X-Axis Movement 350 mm Y-Axis Movement 250 mm Workpiece Workpiece X 650 mm Workpiece Y 580 mm Workpiece Z 250 mm Buomywy2 Workpiece weight 400 kg Additional Equipment AGIE IPG high-performance generator with 72 A This 3-axis AGIE AGIETRON Innovation 2 die-sinking EDM machine was manufactured in 2002. It features a robust AGIEVISION control system, a 28-position electrode changer, and a C-axis for rotation, indexing, and erosion. The machine can handle workpieces up to 650 x 580 x 250 mm and 400 kg. It boasts a high-performance AGIE IPG generator with a removal rate of 450 mm³/min for copper/steel. Consider the opportunity to buy this AGIE AGIETRON Innovation 2. Contact us for more information. Application Types Cutting

Condition: not inspected (used), Used machine currently disassembled Technical data - AGIE INTEGRAL 2 GENERAL SPECIFICATIONS WIDTH: 4000 MM DEPTH: 3000 MM HEIGHT: 2580 MM WEIGHT: 2550 KG MAIN DRIVE NUMBER OF AXES: 4 MOVEMENT X-AXLE MOVEMENT: 350 MM Y-AXLE MOVEMENT: 250 MM Z-AXLE MOVEMENT: 350 MM Additional information MACHINE ADVANTAGES TECHNICAL MACHINE ADVANTAGES: - MAX. DIMENSIONS OF THE PARTS: 860X620X350MM - MAX. PART WEIGHT: 400 KG - C-AXIS: YES - TOOL CHANGER: 28 - CHUCK: EROWA Cihiubkztc

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 455, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, TECHNICAL DETAILS Travel X/Y/Z: 350 x 250 x 256 mm U/V axes: ±70 mm Best achievable surface: Ra 0.1 µm Measuring system: Dual measuring system for X/Y axes Workpiece data Max. Part size (X/Y/Z): 750 x 550 x 250 mm Max. Workpiece weight (without bath): 200 kg Max. Workpiece weight (with bath): 450 kg Clamping base Cgve3Oexy8 Type: AGIE base Generator Type: AGIE IPG with eCut technologies Taper Tilt angle: ±30° Wire threading System: Automatic Smallest wire diameter: 0.1 - 0.33 mm MACHINE DETAILS Dimensions (L x W x H): 2,215 x 2,215 x 2,200 mm Weight: 3600 kg Frequency: 50 Hz Power: 9 kVA Cooling system type: External cooling required

Condition: good (used), Year of construction: 2003, The machine is in good technical condition, after previous agreement the possibility of testing. Ckg3P7Nh8G

Condition: excellent (used), Year of construction: 2015, Wire EDM machine +GF+ AgieCharmilles, very well maintained, regularly serviced machine. Control unit: PC technology AC CUT HMI with LCD color screen, touch screen and mouse Electronic manual control panel Bsipvfhn7Ay Technical data: Travel range X 550 mm, Y 350 mm, Z 400 mm Taper +/- 30° / 400 mm Automatic wire threading with wire diameter 0.25 mm Wire reel unit 16 kg Wire processing unit with disposal system Collision protection for all axes Work table: Hardened 4-sided frame table Dimensions 900 mm x 600 mm Workpiece dimensions max. 1,200 mm x 700 mm Workpiece height max. 400 mm Workpiece weight max. 1,500 kg Dielectric: Capacity 1200 l Filter system with 2 paper filters Water conditioner (ion exchange resin) 10 l Temperature monitoring Machine data: Space requirement approx. 2.6 m x 2.6 m x 2.4 m Weight of machine unit (without dielectric) 3,300 kg Power supply: 400 V, 50 Hz, 11 kVA The machine is in very good condition. An inspection under power is possible at any time.

Condition: refurbished (used), Year of construction: 2009, Functionality: fully functional, AGIECUT Progress V2 Cm8O2Dox0Q Year of manufacture 2009 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator with power module AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2014, Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS Ccaj9Yyilz NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Condition: used, Year of construction: 2012, x-axis 350 mm y-axis 250 mm z-axis 256 mm U-axis +/-70 mm V-axis +/-70 mm dimension of workpiece 750 x 550 x 256 mm Bsfuxwy03Qq total power requirement kW weight of the machine ca. t dimensions of the machine ca. m -edm hours 29559h

Year of construction: 2003, Condition: good (used), net weight: 3,800 kg, EDM, Erodeermachine, vonkmachine Model: CNC Manufacturer: AGIE Type: Agietron Impact 3 Year: 2003 Controller: Agie Agievision Table: 800x600mm Travel: 500x350x500mm Max. Workpiece weight: 800kg Max. Electrode-weight: 50kg Video available Documentation available Bsszlhrh Machine-dimensions: 2850x2150x2850mm Machine-weight: 3800kg

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 2400 mm Measurements height 2540 mm Machine weight 5220 kg Main Drive Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 500 mm Z-Axis Movement 400 mm 1-AXIS Movement 360 Workpiece Workpiece X 920 mm Workpiece Y 550 mm Bsemn0R3Ypw Workpiece Z 370 mm Workpiece weight 2000 kg Table Outer length 870 mm Outer width 550 mm This 4-axis AGIE AGIETRON SPIRIT 4 erosion machine was manufactured in 2006. It features a machine weight of 5090 kg, dimensions of 3000 x 3000 x 2540 mm, and a C-axis with full 360º rotation. Capable of handling workpieces up to 2000 kg and dimensions of 920 x 550 x 370 mm. A robust choice for precision erosion tasks. For more information about this erosion machine, please reach out to us. Application Types EDM

Condition: like new (used), Year of construction: 2014, operating hours: 9,000 h, Functionality: fully functional, !TOOL AND MOLD MAKERS WATCH OUT! 5-ACHS AgieCharmilles CUT 300 SP in very good condition with low running time (9,000 hours) available at short notice. Plus points of the machine: - Complete mechanical and electronic maintenance in 2023 - New cooling unit incl. new hoses - Low running time - Very well maintained machine - Excellent price Technical data on the machine: - Programming language CMD and ISO - Year of construction 2014 - HMI 2 control system - Travels (XYZ): 500 x 350 x 400 mm Bskic978Pow - Travels (U-/V-axis) 550 x 350 mm - Work table: 900 x 600 mm - Full bath machine Switch-on hours: 9000 h Space requirement of the machine: 2600 x 2600 x 2340 mm Weight: 3300 kg Condition: As good as new

Condition: excellent (used), Year of construction: 2010, perfect machine! immersion processing, complete with automatic thread threading. machine with automatic wire changing system particularly suitable for very high precision machining, on fine blanking Cyyv3Dmr axis strokes: 600x400x160mm maximum workpiece dimensions: 1,260x690x360mm maximum workpiece weight: 800Kg maximum cutting inclination: 30° usable wire dimeters (with automatic threading) 0.050 - 0.300mm dry weight: 4,000kg complete with standard and manual accessories visible still installed until week 47/2024

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Bsegup3Wvbq

Year of construction: 2002, Condition: used, voltage 3 x 400 V Bai9Ci0M2O weight 3600 kg output 9 kw

Year of construction: 2007, operating hours: 92,931 h, Condition: ready for operation (used), General Data Machine weight 3700 Additional Equipment Bsb3Vcmsjhe Deionisation system is optional This AGIE Agiecut Challenge V2 was manufactured in 2007. A robust wire EDM machine, it features a weight of 3700kg, operates on 3x400V, and has a power output of 9kVA. With 92931 operating hours and 28581 eroding hours, it's a testament to its durability and performance. If you are looking to get high-quality EDM capabilities, consider the AGIE Agiecut Challenge V2 machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2002, Condition: ready for operation (used), General Data Measurements width 1855 mm Measurements depth 2689 mm Measurements height 2603 mm Machine weight 3000 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 350 mm Workpiece Workpiece weight 400 kg Br7Cftvh9Mm This 3-axis AGIE AGIETRON INNOVATION 2 die-sinking EDM machine was manufactured in 2002. It features X/Y/Z travel of 350 x 250 x 350 mm, can handle workpieces up to 650 x 580 x 250 mm, and supports a maximum workpiece weight of 400 kg. Equipped with a 28-position rotary type electrode changer and a generator power of 72 A, this machine offers robust capabilities for precise die-sinking applications. Contact us for more information about this machine. Application Types EDM

Year of construction: 2008, Condition: ready for operation (used), General Data Machine weight 3000 Main Drive Number of axis 3 Workpiece Workpiece X 350 mm Workpiece Y 250 mm Workpiece Z 220 mm This 3-axis AGIE CUT 20 wire EDM machine was manufactured in 2008. It features a working area of 350mm (X) x 250mm (Y) with a maximum machining height of 220mm in Z. If you are looking to get high-quality EDM capabilities, consider the AGIE CUT 20 machine we have for sale. Contact us for more information. Br0Up7Ipe0K Application Types EDM