Used Wire Forming for sale (6,649)

Condition: ready for operation (used), BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 1,5 mm winding diameter: max 45 mm max spring length: 100 mm Hodjwrt T Uopfx Ahvoi max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 2000 mm weight: 700 kg

Condition: used, Year of construction: 1999, High-performance Wire-O coil cutter from Renz Adjustable number of loops Adjustable speed incl. various guide rails for the most common Wire-o diameters 5/8 , 7/8 , 3/4 , 3/16 etc. ..... Hsdpfstp Ra Isx Ahvei + transport gears 2:1 and 3:1 Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Hodoymn Hwspfx Ahvsi You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: good (used), Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A Hodefcl H Ijpfx Ahvei -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg Hsdefcl H Ujpfx Ahvji

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor Hsdpfoq Rxz Tsx Ahvei -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hedpfx Aextwddehvsi

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Hedpfxowunmbj Ahvei Sold only in whole.

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 Hsdpfef Nku Rex Ahvsi The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Hodpfx Aog Atrvshvji

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Hjdpjxghngsfx Ahvoi Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: Hjdpfxjr D N Eqs Ahvoi wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,858 mm, overall weight: 4,400 kg, This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, it's ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information. Machine Benefits Technical Machine Benefits Hsdpfx Aex D D Dfehvji • Work tank size: 1200x800x500 mm • Work table size: 800x600 mm Extra Information Machine still under power Dimensions Machine Depth 1600 mm

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Hodpfjynfunjx Ahvoi Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: good (used), Introma ZD-2 SR Wire Stitcher The machine is in very good condition and ready to use. This is the current production model. Hedpfxoynfuhj Ahvoi Technical specifications: Capacity: 180/min Sewing thickness: max. 25mm Wire diameter: max. 1mm Power supply: 230V Weight: 230kg The machine has an adjustable table for block and booklet stitching. Side and front margins. Instructions included.

Condition: used, x-axis 370 mm y-axis 270 mm z-axis 250 mm control Sodick LQ33W workpiece length 570 mm work piece width 420 mm Hodpfx Ahsynbinsvji max. workpiece weight 500 kg The machine is untested and is being sold as a source of spare parts! Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of construction: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in XY axes Linear encoders in XY axes Intelligent AT – Automatic Wire Threading For wire diameter 0.10 – 0.3 mm Automatic fine hole searching function 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Hedpexpfy Ssfx Ahvoi Wire alignment block Wire chopper Compressor cooler ä25226

Condition: used, Steel wire ropes, wire ropes, steel lifting slings Length: 10 m Diameter: 25 mm Loops right/left Load capacity: 5 t. Hodpogzpw Isfx Ahvji 6 pieces available

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,417 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,400 kg, number of axes: 4, This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. Hsdpfsx Nr N Nsx Ahvoi • Axis speed (X/Y/Z): 4 / 4 / 6 m/min • Position reading accuracy (X/Y/Z): 0.1 µm • C-axis (standard) rotation speed: 0–100 rpm • Work tank size: 1200 x 800 x 500 mm • Worktable size: 800 x 600 mm • Max electrode weight: 100 kg • Max workpiece weight: 1000 kg • Workpiece dimensions: 1000 x 700 x 400 mm • Dielectric unit capacity: 750 l • Generator type: ISPG • User interface: AC FORM HMI • Power supply: 3 x 380 V, 3-phase, 50 Hz

Condition: excellent (used), Year of manufacture: 2022 Machine type: Sheet metal profiling and punching line Operating mode: Continuous (flying system) Maximum decoiler capacity: 15,000 kg Material feed: from sheet metal coils Straightening unit: Multi-roll straightener Number of punching portals: 5 double punching portals Number of tools: up to 20 small / 10 large tools Round holes: Ø 8 – Ø 22 mm Slotted holes: up to 18 × 80 mm Keyhole slots: Yes Pre-cutter: flying Post-cutter: rotary with hook knives Profiler: 4 forming stations Hsdpfx Ajymampehvji Profile width range: 100 – 400 mm Strip centering: automatic Guide modules: SIGMA Maximum profile length: 15 m Outfeed table: roller table, automatic transport Cutting mode: without material stop

Condition: excellent (used), OPEM Arabella Vacuum Coffee Packaging Line – 250 g – with Gas Flushing & Valve System – Year 2005 Manufacturer: OPEM Model: Arabella Year of manufacture: 2005 Condition: Very good, fully functional Location: Germany Availability: Immediately available Machine Description For sale is a complete vacuum coffee packaging line for 250 g bags (ground or whole beans). The system is equipped with: • Vacuum brick packaging system • Inert gas flushing (nitrogen flushing) • Integrated aroma valve system (degassing valve) • Including dosing system • Packaging from roll stock • Compact monoblock design Hodpjynn A Ijfx Ahvji • Industrial-grade, "Made in Italy" This machine is ideal for freshly roasted coffee and guarantees optimal aroma preservation and extended shelf life through the combination of vacuum, inert gas flushing, and valve. Technical Data • Pack size: 250 g • Packaging type: Vacuum brick pack and soft-gas-pack bags • Output: approx. 20–30 bags/minute (depending on product) • Gas system: Nitrogen flushing • Valve system: Integrated • Dosing system: Included • Packaging from roll stock • Year: 2005 Scope of Delivery • OPEM Arabella main machine • Dosing system • Gas flushing unit • Valve application system • Control cabinet / electrics Spare parts available

Condition: ready for operation (used), functionality: fully functional, For sale is a Rovema form-fill-seal machine for packaging coffee in weight ranges from 500 g to 1,000 g. The machine is fully operational and features an integrated aroma valve system for coffee pouches with freshness valve. Technical specifications: • Suitable for 500–1,000 g of coffee • Integrated valve system • Robust, durable construction • Ideal for ground coffee or whole beans • Comprehensive spare parts package included This machine is manufactured to high German quality standards – solid, reliable engineering (good traditional workmanship). Inspection or demonstration available by appointment. Hsdpfx Aeynntmjhvsi

Condition: ready for operation (used), Productielijn voor de fabricage van metalen rekken 14 stations: dubbel aangedreven Asdiameter 80 mm station lt;- station: 400 mm Verstelbare hartafstand assen: min. 100 mm; max. 280 mm Maximale invoerbreedte: 780 mm maximale dikte: 3 mm staal Inbegrepen: - Colombo excenterpers 100 ton voor ponsen Slag: 150 mm 16,5 pk Tafel: 600 x 1000 mm Slagen/min: instelbaar van 30 tot 90 slagen/min. - 4-koloms pers op rails die functioneert als vliegende schaar Tafel 400 x 400 mm - Lostafel Work mode: Roll forming unit Material thickness x width: W 780 mm Max Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Hjdpfx Aeyl A Imjhvsi Conveyor: Yes

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius Hedpfjwhf Hfsx Ahvoi 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm Hodpfx Aoh Uhqyohvji weight 700 kg very good condition