Conveyor belt, belt conveyor, conveyor belt, belt conveyor
Nobn9
-Speed: 12.65 m/min
-Drive: 0.18 kW
-2x belt widths: 275 mm
-driven via: one axle
-Length: 3210 mm
-Number: 3x conveyor belts available
-Price: per piece
-Transport dimensions: 3210/1020/H720 mm
-Weight: 124 kg
The Trio angled belt has a plastic link belt with running side limits.
The original price : 3165,00€
Temperature resistant up to 125 C
Task part : 600mm
Climbing belt : 1215mm
NB : 300mm
GB : 410mm
cleat height : 25mm
lug spacing : 380mm
Belt speed const. 3m/min
Hb7ro9jek
Angle of inclination: 45 degrees
Belt conveyor Weinig
Bxfvftbu
Conveyor table Weinig
- dimensions LBH: 3,5 x 2 x 1 m
- Number of belts: 7.
Lippert belt conveyor ascending belt GF 4920-550-400
RA1606
The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request.
The pictures shown of the conveyor system were taken in a logistics center while it was still installed.
...
Used roller conveyors
Data :
- L : 239 cm
- W : 95.5 cm
- Roll length : 85,5 cm
Bfkmcnz8jj
- Roll diameter : 6 cm
- Price per piece.
- Used goods from stock.
- Each element is equipped with a brake roller in the middle, but this can be removed if necessary.
----- AVAILABLE MULTIPLE TIMES-----
Price :
150,00 € net
178,50 € gross
You will receive an invoice with VAT shown on it.
Delivery on request by us at a reasonable price.
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Roll diameter: 125 x 640 mm
-Total length: 775 mm
-Hole spacing of bearing blocks: 730/125 mm
-Sprocket: Ø 107 mm
-Dimensions: 775/160/H125 mm
Nofwh
-Weight: 21.4 kg
The conveyor belt is NEW , without side limit
Length : 3000 mm & 4000mm & 5000mm
Width : 800mm
Belt speed : 3m/min , this can be increased up to 15m/min
Xh9xsj8n
Belt conveyor Weinig
Conveyor table Weinig with transverse roller conveyors and pneumatic lifters
Hbu3jzy9i
- dimensions LBH: 3,7 x 2 x 1 m
- roller conveyor width: 230 mm
- Number of belts: 6.
Axmann belt conveyor type 4081 GF 2500-900-800
RA1808
Technical data:
Conveyor length (NL): 2500 mm
stand width (NB): 900 mm
Belt width (GuB): 800 mm
overall height (BH): 130 mm
support feet: 2 pieces
Conveying speed (v m/s): 1.0 m/s constant
Drive: SEW gearmotor SA37/T DT71D4 (center drive version)
Electrical data: 50Hz V380-500, kW 0.37 / S1
Idler pulley (UR): Ø = 80 mm
Belt: black, smooth
Year of manufacture: 2001
Optionally available:
Side guides one-sided: 25,00 Euro p. m. plu...
conveyor belt approx. 4,12m long
height adjustable approx. 80 to 100 cm
ideal for material transport between two machines
We have used it between 4-sided planer and fine planer in a joinery. Other uses possible.
Machine can be inspected but not tried (was plugged directly into the control box and has no plug, but runs fine).
C2hafsqc
Loading can be helped (forklift, helper by prior arrangement).
Excavator mats, rubber excavator mattresses, excavator protection mats, rubber protection mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt
-Width: 600 mm
Bfjssevmxw
-Length: 4850 mm
-Transport dimensions: 600/340/H130 mm
-Weight: 16 kg
The conveyor belt has:
Buomwleuep
Length : 1000mm
Width : 550 mm
Height adjustment : 400mm
Belt speed, constant : 3m/min
Conveyor belts Engel
Year 2006
L. 200 cm
W. 85 cm
With four readers
Hekdhaovg
Axmann belt conveyor type 4081 GF 2500-900-800
Fk7vwyf
RA1810
Technical data:
Conveyor length (NL): 2500 mm
frame width (NB): 900 mm
Belt width (GuB): 800 mm
overall height (BH): 130 mm
support feet: 2 pieces
Conveying speed (v m/s): 1.0 m/s constant
Drive: SEW gearmotor SA37/T DT71D4 (center drive version)
Electrical data: 50Hz V380-500, kW 0.37 / S1
Idler pulley (UR): Ø = 80 mm
Belt: green, smooth
Year of manufacture: 2001
Optionally available:
Side guides one-sided: 25,00 Euro p...
Belt width:600 mm
Belt length:2.400 mm
height adjustment:ja mm
Oxhth
weight:150 kg
dimensions:2,5 x 0,75 x 1,1 m
Payment: 100% prior to delivery
Conveyor belt, belt conveyor, conveyor belt, belt conveyor
-Conveyor belt comes: from a machining center BJM type ALBZ-145
-Speed: 10 m/min
Bft2jyvgoy
-Drive: 0.18 kW
-Belt width: 1000 mm
-Length: 3545 mm
-Transport dimensions: 3545/1200/H310 mm
-Weight: 268 kg
The conveyor belt from the company M-Fördertechnik has ;
G9gl9bv90
Length 800 mm
Width : 440mm
Height adjustable : 400mm
Belt speed : 3m/min
Belt conveyor, Van der Lande, driven, lengths from 8,40m to 14,30m, elements can be shortened!, belt width 60cm - second-hand - :
price per piece:
Length 8,40m and 9,60m = 850.-€ (net), disassembled and loaded!
Length 14,20m = 1.050.-€ (net), disassembled and loaded!
Buic9firpt
Attention: Due to the length of the elements, all elements were disassembled and the belts are cut, i.e. you would have to look for a company in your region that welds the belt again (there are actually in all regio...
Lippert belt conveyor ascending conveyor GF 9325-750-600
RA1600
The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request.
The pictures of the conveyor system shown here were taken in a logistics center while still installed.
...
16 units conveyor rolls
steel pipe - welded - coated - red
diameter 80 mm
roll length 460 mm
installation length 460 mm
length of the axle 490 mm
spanner gap 15 mm
Bfbidm3h7t
weight approx. 5.3 kg
- price per unit -
Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt
Bhpwj7b9ao
-Side walls made of: stainless steel
-Speed: 118 m/min
-Drive: 0.75 kW
-Belt width: 590 mm
-Length: 2000 mm
-Transport dimensions: 4360/1170/H1170 mm
-Weight: 684 kg
The conveyor belt is equipped with a web edge, in addition, we have a separating roller attached, but this can be easily dismantled.
To7osd2f
Feed : 600mm
ascending belt : 1800mm
Discharge height: max. 1350mm; min. 1050mm
NB: 350mm
GB : 405mm
belt speed : 3m/min
Conveyor Peter Schulz
Engine No. 11962
Year of construction: 1979
motor driven 16 A
Dvtc2q
Dimensions Lxwxh: 1100 x 300 x 740 mm
Axmann belt conveyor type 4081 GF 2500-1100-1000
RA1809
Technical data:
Conveyor length (NL): 2500 mm
stand width (NB): 1100 mm
Belt width (GuB): 1000 mm
overall height (BH): 130 mm
support feet: 2 pieces
Conveying speed (v m/s): 1.0 m/s constant
Drive: SEW gearmotor KA37/T DT80N4/BMG/TF (center drive version)
Electrical data: 50Hz V380-500, kW 0.75 / S1
Idler pulley (UR): Ø = 80 mm
Belt: black, smooth
Year of manufacture: 2001
Optionally available:
Side guides one-sided: 25,00 Eur...
5 units conveyor rolls
Ydmgf2mk
steel pipe - welded - coated - red
diameter 800 mm
roll length 600 mm
installation length 600 mm
length of the axle 630 mm
spanner gap 15 mm
weight approx. 6,2 kg
- price per unit -
Conveyor belt, belt conveyor, conveyor belt, belt conveyor
-Side walls made of: stainless steel
-Speed: 37 m/min
-Drive: 1.5 kW
-Belt width: 800 mm
-Length: 3280 mm
-Transport dimensions: 3280/1200/H1300 mm
-Weight: 514 kg
Ddrl0iiqk
- Conveyor belt length approx. 2500mm
- conveyor belt width approx. 600mm
Ttvojzdd
- height adjustable from approx. 200mm to 900mm in 30mm increments
The conveyor belt was completely dismantled and the defective parts replaced.
Total width: 620mm
working width : 420mm
P09cdiod
Feed : 600mm
ascending belt : 1600mm
delivery : 400mm
Belt speed, constant: 4m/min
Mobile
Delivery height : max 1200mm
Height adjustable
Angle adjustable
cleat height 35 mm, every 400mm
Horizontal band ENGEL 3500x1200 mm
Buom3tnkje
year: 2015
Contact: Mr. Rainer Eckerle
Lippert Belt Conveyor Folding Belt GF 735-750-600
RA1591
The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request.
The pictures of the conveyor system shown here were taken in a logistics center while still installed.
Techn...
Conveyor Belt, Belt Conveyor Belt, Conveyor Belt Rubber, Rubber Conveyor Belt, Belt Belt
-Width: 600 mm
Bho3ndmbfr
-Length: 10500 mm
-Weight: 50 kg
Belt width:600 mm
Belt length:2.400 mm
height adjustment:ja mm
weight:150 kg
dimensions:2,5 x 0,75 x 1,1 m
Bnpatrjstp
Payment: 100% prior to delivery
The Z-belt conveyor NDZ 5 with the dimensions ; 600/1800/500 has additionally a corrugated edge , therefore well suitable for smallest parts .
G2seuprz0
This type NDZ is available from NDZ 1 - NDZ 6.
The belt speed can be chosen freely ,
Standard: 3m/min up to 16m/min
Can also be equipped with a frequency converter if required
Horizontal band ENGEL 2500x1200 mm
year: 2015
Contact: Mr. Rainer Eckerle
Dx8dia
Lippert Belt Conveyor Folding Belt GF 735-750-600
RA1593 - RA1597
The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request.
The pictures of the conveyor system shown here were taken in a logistics center while still installed.
...
Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor
-Speed: 13.5 m/min
-Drive: 0.12 kW
-Belt width: 400 mm
-Conveying length: 1500 mm
Eouscwhme
-Transport dimensions: 1550/760/H200 mm
-Weight: 98 kg
Kannegiesser Inclined Conveyor 80 cm Belt Conveyor 4.75 m
The Kannegiesser belt conveyor is in a very good condition.
The belt conveyor has a motor, with frequency converter to regulate the conveyor speed.
The supports shown can also be used as support feet for standing use.
This belt conveyor has been specially developed for applications that require a powerful drive.
Belt width: 750 mm
Belt length: 4750 mm
incl. support feet
Connection voltage: 400V
Bumi7kxcjb
Motor
Conveying speed (v m/...
Stock, all tapes available for immediate use
The conveyor belts can be converted/equipped with a belt speed of 3m/min-16m/min
Yr8zc
can be reduced to the required speed via the frequency converter
we offer:
Conveyor belt The belt 300x50x115cm adjustable in height and angle,mobile on 2 stands with 2 rollers each, support in the middle, belt is functional.
Type: 300x50x115cm
No. 9508-0379/02
dimensions belt: 300x50cm
dimensions plant: 300x70cm
height: 115cm
Angle: adjustable
belt speed: 4-5m/min
mobile: yes on 4 rollers
connection: 380/220V 50 Hz
gear motor: RF 0,25/4-7 0,25 kW 1410 U IP 44
control cabinet with contactor and motor protection
weight approx. 200 kg
Condition. used, ready for ...
Lippert belt conveyor ascending belt GF 8000-750-600
RA1601
The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request.
The pictures shown of the conveyor system were taken in a logistics center while it was still installed.
...
✔ It is used to transport material into the shredder
✔ Length: 5000 mm
Buj083fq2p
✔ Width: 600 mm
Excavator mats, rubber excavator mattresses, excavator protection mats, rubber protection mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt
-Transfer: in the current condition as seen
-Thickness: 10 mm
-Width: 1.005 mm
-Length: 4,040 mm
-Transport dimensions: 1200/800/H510 mm
-Weight: 80 kg
N0iv9
Kannegiesser Inclined Conveyor 75 cm Belt Conveyor 4 m
The Kannegiesser belt conveyor is in a very good condition.
The belt conveyor has a motor, with frequency converter to regulate the conveyor speed.
The supports shown can also be used as support feet for standing use.
This belt conveyor has been specially developed for applications that require a powerful drive.
Bumi0u3puy
Belt width: 750 mm
Belt length: 4000 mm
incl. support feet
Connection voltage: 400V
Motor
Conveying speed (v m/s):...
Used Conveyor belts
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: the 10 strongest forklift trucks in the world
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
How to receive 100% of our e-mails
