Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec Cslq Duogv I Ihswwsgt 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Year of construction: 2025, operating hours: 5 h, Condition: new, Functionality: fully functional, Our semi-mobile electric stone conveyor for separating rollable material such as stones. Directly behind a trommel screen for separating stones from green waste, compost or soil. Simply via a 16Amp plug power source. The belt angle and speed of the belt are adjustable. Cgelq Duwerhkpzewst Belt dimensions: approx. 1,200mm x 3,200mm

Year of construction: 2005, Condition: ready for operation (used), A shredding machine including a DS 250 vibrating conveyor chute, which can be used in the wood industry as well as in the textile industry, is available. Power: 11kW, operating pressure: 280bar, weight: approx. 1100kg, chute length: 4000mm, chute width: 250mm. Documentation available. On-site inspection is possible. Cgjlq Duev Tnx Newwjt

Condition: new, Year of construction: 2025, COMPLETE SHREDDING LINE!!! -loading conveyor to shredder WT -single shaft shredder with hydraulic pusher WT3080 30Kw, rotor length 800mm -unloading conveyor from WT and loading to knives mill PC -knives mill PC42100R 45kW, rotor length 1000mm -blower with 5.5kW motor Colq Duwjv I T Dyewsgt -big bag station for two bags

Condition: used, Year of construction: 2006, power: 11 kW (14.96 HP), WE SELL A PRESSING STATION WITH CUTTING UNIT AND 1 PIECE CAPACITY, WHICH IS SUITABLE FOR PRESSING SECONDARY RAW MATERIALS! MANUFACTURER - PRESTO GmbH (Germany) Celjv Tm Dkjq Duwwsgt type: SPN15 year of production - 2006 CAPACITY - 30M3 power - 11 kW PRICE ON REQUEST!

Condition: like new (used), Functionality: fully functional, fuel type: diesel, overall weight: 29,000 kg, Year of construction: 2003, operating hours: 1,300 h, Terex Pegson Metrotrak 900x600 2003 year 1300 hours Inlet 900x600 mm Engine CAT 3126 CSS range from 0-50 to 0-150 mm Capacity 80-120 tons per hour depend on material Weight 29 tons Fitted with side conveyor Fitted with overband magnet Machine with new main bearing and new shaft Cjlq Duwsv I Sx Nowsgt Machine in very good working condition, ready for work

Condition: new, Year of construction: 2025, Also, different models are available! Cgelq Duodfcqaswwot IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: excellent (used), Functionality: fully functional, Year of construction: 2021, operating hours: 2,800 h, Vermeer TR6400 drum screen, built in 2021, with approx. 2800 hours for sale. Screen linings for the entire drum 10mm, 20mm and 40mm. As well as for the half drum 30 and 60 mm. The machine is located near Hamburg and can be inspected and tested at any time. Cjlqjv A Rtho Duwwogt

Year of construction: 1996, Condition: ready for operation (used), A Tiek channel baling press including conveyor belt and tipping device is available. Pressing force: 50t, bale width: 800mm, bale height: 1100mm, bale length: unlimited, motor power: 22kW. Documentation available. On-site inspection is possible. Cgolq Dov Tnygjuwwjt

Condition: new, Year of construction: 2025, SHREDDING LINE - ALL IN ONE -Single shaft shredder with hydraulic pusher WT3080, rotor length 800mm, main motor 30kW, hydraulic motor 2.2kW, rotor knives 46pcs, size of rotor knives 40x40x25mm, -Knives mill (granulator) PC3280R, rotor lenght 800mm, main motor 22kW, V rotor 6pcs knives, 4pcs fixed knives -Blower 5.5kW -Big bag station Colq Dusv I S T Tewwogt

Condition: used, Year of construction: 2016, power: 7 kW (9.52 HP), For sale Pressstation STV1000 with container 30 m3! Cgslq Dusv Tm Atewwst Technical data pressing station: Pressing station - STV1000 Year of construction - 2016 Dimensions (length x height x width): 3360 x 1165 x 1561mm Pressing force: 300 kN Filling opening: 1180 x 1405 mm Power: 7.5 kW; CONTAINER: capacitat/volume - 30 m3 Year of construction - 2016 PRICE ON REQUEST!

Condition: used, Technical data single-deck ballistic separator for three separation fractions: Manufacturer Lubo Screening & Recycling Systems B.V. Type Elliptical 10EBB05 Year of construction 2015 Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kg Note on the separation process: The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans. Condition of the machine: The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in a well-maintained condition and works perfectly. On request, various spare parts can be purchased for a separate, additional fee. Comments: Cgolqeu Tg A Ie Duwwst The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, - Cutting Force : 700 Tons - Capacity : up tp 20 tons per hour - Side Compression Force : 2 x 85 Tons Colq Dogv Aaceuwwogt - Clemp Compression Force : 100 Tons - Electric Motor : 160 kW - Machine Weight : 55.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Year of construction: 1990, Condition: ready for operation (used), Two AUTEFA baling presses including automatic bale strapping are available. Press force: 70t, pre-press force: 25t, press dimensions X/Y: 1100mm/600mm, drive: hydraulic, power consumption: 22kW, press capacity: 4 bales/h, bale weight range: 400kg-800kg, material feed diameter: 250mm, machine dimensions X/Y/Z: approx. 4000mm/2000mm/3000mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible. Cslq Duev Tnx Aswwogt

Condition: used, Year of construction: 2006, power: 11 kW (14.96 HP), WE SELL A PRESSING STATION WITH CUTTING UNIT AND 1 PIECE CAPACITY, WHICH IS SUITABLE FOR PRESSING SECONDARY RAW MATERIALS! MANUFACTURER - PRESTO GmbH (Germany) type: SPN15 year of production - 2006 CAPACITY - 30M3 power - 11 kW Cgslq Dev Tm Agouwwst PRICE ON REQUEST!

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: Colq Deu Tha Isuwwsgt 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, Condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour Cgelsdfcpaoq Duwwjt - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 264 kW - Machine Weight : 85.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Year of construction: 2003, Condition: ready for operation (used), Cutting width: 1000mm, rotor diameter: 600mm, rotor blades: 6, stator blades: 2, screen diameter: 25mm, power: 75kW, weight: approx. 4600kg. On-site inspection is possible. Cslq Dov Tnyaouwwjgt

Condition: used, Year of construction: 2019, Type - HKV Colq Djv Tmzcsuwwegt Manufacturer - Ludden & Mennekes Year of manufacture - 2019 Fits 4-wheel MGBs with flat tops, and also 2-wheel 240-liter MGBs.

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Colqeu Thx Re Duwwegt Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. Cgelq Djdfc Ikouwwot 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW - Machine Weight : 78.000 kg Cgsljgv Aa Ijq Duwwet - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 180 kW 2. Machine Weight: 20.000 kg 3. Shredding Capacity: 10 t/h (Steel) 15 t/h (Copper) 4. Blade Quantity: 90, Blade Thickness: 100 mm. 5. Loading Chamber Dimensions: 1.600 mm x 2.400 mm 6. Shredding Chamber Dimensions: 1.000 mm x 1.600 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. 15. Each shaft will be able to move independently from each other. Cgolqegwcc As Duwwjt 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. Colqjd Iya Ne Duwwegt SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Capacity: 1000 - 1500 kg/hour Electric Motor Power: 15 kW Machine Weight: 1800 kg Colq Duwjd Im Adewsgt