Used sorting equipment for sale (54)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Ijdpfx Aoy Urtfja Eoaw

Condition: used, functionality: fully functional, The separation is achieved through repeated fractionation on up to 5 longitudinally arranged, superimposed sieve decks, the inclination of which increases downwards. The sieve frame is driven by unbalanced motors. The installed sieve decks have the following sizes: 15-10-5-3-1 mm. Iasdpfx Aaezl Sv So Eow The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2024, operating hours: 150 h, condition: used, functionality: fully functional, This stone separator can be used to remove rolling materials. Its primary application is for stone removal in compost, biomass, and screening overflow processing, where large quantities of stones can be separated. The best results can be achieved when used with a defined medium grain fraction (e.g., 40-80 mm). A magnetic deflector roller is installed for the separation of iron parts. The material is collected under the machine via the metal slide and can be caught in a hopper. Throughput: up to 50 tons per hour (i.e., approximately 100 tons/hour input for a screening machine, since only one fraction is being processed). Power connection: 16A CEE 5-pole three-phase plug. Weight: ~1.8 tons Dimensions: ~5m length; ~2m width Transport: Chain hoist with 4 crane eyes OR forklift attachment Adjustment: Conveyor belt speed via frequency inverter; inclination via crank. This is our demonstration machine, which is in used but very good condition. Iaedpozk Izzjfx Aa Ejw The installed suction hood and pressure nozzle can be purchased together to operate the stone separator in conjunction with an air classifier. This allows even light contaminants, such as plastic films, Styrofoam, etc., to be removed. In combination with the TUKWIND PRO 18 air classifier (separate listing), you have a complete solution for contaminant removal.

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51N292010-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are suspended by injected air and consequently float downwards. The application areas include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with a motor. Nominal width: 1000 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Iaodpfx Aajzkvaxe Eew Easy adjustment: of impact angle, oscillation amplitude, inclination, speeds, etc. Design: dust-proof Control cabinet: in an IP 55 housing with a frequency converter for motors and fan, included as standard. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51.I613-020-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are kept suspended by injected air and consequently float downwards. Isdezkup Eepfx Aa Eeaw The applications include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two unbalanced motors and a fan with a motor. Nominal width: 600 mm; sieve aperture 0.6 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, amplitude, inclination, speeds, etc. Design: dust-tight Control cabinet: is not included; 2 x 500 W unbalanced motors and 1 x 4 kW fan The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex works at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Details of the VS BIG (Two-Deck): • Top deck: 130 x 130 mm screen mesh • Bottom deck: 90 x 90 mm screen mesh • Fixed metal brake (instead of rubber brake) • 400V power connection Iedpjyirx Nefx Aa Esaw Conveyor Belt CB 3000: • Without standard frame with wheels • Fixed frame at the bottom This setup allows for efficient and precise screening directly on-site!

Condition: new, functionality: fully functional, overall weight: 1,900 kg, Year of construction: 2024, Introducing the Traserscreen DB-40LC – The Ultimate Screener for Unmatched Efficiency! Transform your material screening process with the Traserscreen DB-40LC. Engineered for excellence, this high-performance screener offers unparalleled durability, precision, and speed, making it the perfect choice for professionals in landscaping, construction, and agriculture. Ijdot Ebphspfx Aa Esaw Key Features: Robust Design: Built to withstand demanding environments and heavy-duty use. Hopper width: 2657mm. High Efficiency: Achieve faster, cleaner results with advanced screening technology. Screening 15-60t/h. User-Friendly: Easy setup and operation for maximum productivity. Weight 1900kg.

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, overall weight: 9,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0403, EDDY CENTRIC combines an iron and non-ferrous metal separator and offers an efficient and compact way to separate metals from a material stream at the highest throughput rates. A combination of a robust and powerful drum magnet separator for separating ferrous metals (nails, screws, etc.) and a centric eddy current separator for separating non-ferrous metals (aluminum, copper, brass, etc.) allows for the production of three marketable fractions in a single processing step. Iaodpfezfy R Dox Aa Eow This module is part of our rental fleet.

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Technical data: Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Ijdpfx Aaszd Srwe Eeaw Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Permissible ambient temperature: -10 °C to +35 °C Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Year of construction: 2013, condition: good (used), functionality: fully functional, We offer a sorting system consisting of: - Screening drum - Inclined belt conveyor - Conveyor belt - Sorting belt with 6 sorting stations - Hopper The system needs to be dismantled. It was only in operation for a short period. For sale via bidding. If you have any further questions, please do not hesitate to contact us. For sale via bidding. Iaodpszdq Uwefx Aa Esw Sold as is, without warranty, guarantee, conformity or manufacturer's declaration.

Year of construction: 2022, operating hours: 3,863 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 006682, On behalf of our customer, we hereby offer a virtually new OI sorting. This installation can be tested in operation at the customer. The machines consist of; Sorting oi: Isdpfxowq D Dns Aa Eeaw 0050 Bunker belt with dosing drum BDF1200/2000*10000 0060 Ascending belt to screen HBT1200/1600*14000 0070 Cardboard screen 1640*7000 Platform Cage ladder 0080 Adjustments to existing paper chain belt 0090 Switch cabinet included Operating hours only 3863 In consultation with the customer and Bollegraaf, a guarantee is possible under certain conditions See the attached PDF for a precise technical description per machine

Condition: used, No. 10012 Feed hopper Rema Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location Ijdpev N E Iyjfx Aa Eeaw

Year of construction: 2019, condition: excellent (used), Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overband plate magnet Execution in VA 1.4301 tightly welded NEODYMIUM MAGNETIC CORE, very adhesive! Dimensions: 620x520x200mm 4 - piece M16 eyebolts on the back This lifting magnet was used by one of our customers as a "police magnet" in the meat processing industry. The price mentioned refers to 1 piece. Currently only 1 piece available from stock! All information without guarantee, only while stocks last! Isdohuphrepfx Aa Esaw Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm 820x520x250mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...

Year of construction: 2018, condition: like new (used), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation Ijdpfjc Tnh Djx Aa Eoaw + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Drum: Ø 220x400mm

Year of construction: 2018, condition: as good as new (ex-display), machine/vehicle number: TMA500x600mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 800mm Isdpfx Ajdzqw Asa Ejaw B: 800mm H: 820mm Inlet: 600x250mm Drum: Ø 500x600mm

Year of construction: 2018, condition: as good as new (ex-display), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation Iaodpedzqxbsfx Aa Eow + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Drum: Ø 220x400mm

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Iaedpjpcf Etofx Aa Eew Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Year of construction: 2022, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, Waste Recovery and Sorting Line – Year 2022 Complete line for the recovery and sorting of municipal and industrial waste, manufactured and installed in 2022, with very few operating hours and in very good overall condition. The installation is equipped with leading European brands, including: • PICVISA – ECOPACK EP-2000 and EP-1500 optical separators • NIHOT – WSF 800 and SDS 800 air density separation systems • SPALECK – Vibratory screen • GUNTER – SPLITTER UNIT 425 screening and separation Iasdpfsy Snntox Aa Eow • SPR – 1-rotor Pre-crusher shredder • FELEMAMG – Magnetic and inductive separators • ATLAS COPCO – GA37 VSD FF compressor • Large number of conveyor belts and feeding/storage silos Approximate operating hours range from 1,000 to 2,500 per unit, with the majority of components maintaining excellent operational condition. The facility can be purchased: • As a complete line, • As separate sections, • As individual units. This is a modern facility, equipped with high-performance optical sorting and air density separation technology, specifically suited for: • MSW (Municipal Solid Waste), • Packaging, • RDF/SRF, • Plastics, • Film, • Paper, and light waste recovery.

Year of construction: 2018, operating hours: 100 h, condition: used, functionality: fully functional, Force Maincylinder: KN 1.000 Iaedpfx Aolhqbroa Eow Capacity: car/hour 30 Measurement: 2,2x8 mxm Machine weight 18 to Place: Austria Available immediately

Condition: excellent (used), X-ray sorting system. Manufacturer: TITECH TOMRA Model: X-TRACT 1200 Year: 2012 The machine is in very good condition. Complete machine overhaul carried out. Source renewed: €35,000 All sensors replaced: €29,000 Belt replaced. Areas of application: - Metal sorting - Sorting of wood, production of refuse-derived fuels (RDF) - Sorting of organic waste Iedpfx Aey Ra D Rja Esaw

Condition: used, functionality: fully functional, machine/vehicle number: 2014, operating hours: 1,640 h, MAKE: MENART MODEL: 1032 MTRA YEAR: 2014 HOURS: 161750 EXTRAS: Diesel 326 HP Iasdsy Iwb Iopfx Aa Esw SERIAL NO.: REGISTRATION NO.: 26-01.75-1

Condition: good (used), metal detector S+S Iajdpfxjtu Nnus Aa Eow for sorting metal parts from a material flow. The material passes through a chute and the metal parts exit from another chute. chute inlet 70mm . sold with stand, height 2m.

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale are three optical sorters from Bühler. Iajdpfxeyrndaj Aa Eew They are currently still integrated into our production and can be inspected on site. The relocation is scheduled for around the end of August 2026. All technical data can be found in the pictures. If you have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), Semi automatic sorting line with 1 waste pocket and two size pockets. Line is equipped with metal detector Mesutronic. Sorting process is controlled by operator. Fully working line with hydraulic station and electrical cabinet included. Video of working process available by request. Working diameters 100-500 mm Ijdpfx Aev Nwrwoa Eoaw

Year of construction: 2014, condition: used, We are offering this used IFE Aufbereitungstechnik GmbH MPQ 750 overband magnetic separator, year of manufacture 2014. If you have any questions or require further information, please feel free to send us a message or give us a call. Iasdpfx Aasyxrpno Eew