Scrap shear

Aymas Recycling Machinery IS 900 Inclined Shear

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Bdedeq Nmw Ijpfx Apdoi

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Bjdjq E Ti Hepfx Apdjdi

Condition: used, Year of construction: 2003, Two-way excavator designed for loosening and removing material, either for stockpiling or loading onto a transport vehicle. The machine is used in the following operations: - on railway and tram tracks - maintenance and trackside work - earthworks and roadworks Manufacturer: ATLAS Model: 1604 KZW Year of manufacture: 2003 Weight: 22,000 kg Dimensions: 5.9x2.5 m, height: 3.0 m Engine power: 90 kW Equipment: - air conditioning - Webasto heater - three-section boom - front and rear hitch - additional hydraulic outlet for a pneumatic hammer - reversing camera - four hydraulic side supports - joystick control Technical condition: used, operational Bjdpfx Apehutkfododi

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Bedpfx Ajvt Tptopdsdi Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. See PDF-file below for more detailed information.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 01113, total width: 2,180 mm, total length: 12,200 mm, bale length: 500 mm, bale height: 400 mm, pressing force: 350 t, overall weight: 34,000 kg, Ecotecnica shear baler mod. 2535, year 2013, with approximately 5,000 operating hours, in good working condition and complete with documentation. Machine suitable for compressing and shearing ferrous scrap, including sections, sheet metal, and mixed scrap. Technical data: Shear force: 350 tons Operating hours: 5,000 Compression box length: 5.0 m Box width with wings open: 1.70 m Bale size: 500 x 400 mm Total length: 12.20 m Width: 2.18 m Bedpey Ibw Tofx Apdodi Weight: 34,000 kg Equipment: Iveco diesel engine, 172 HP Radio remote control Complete documentation Machine is fully functional and ready to use. Inspection and testing possible.

Condition: new, Year of construction: 2025, SANITARY CONTAINER WC + SHOWER LUX Directly from the manufacturer – high-quality design at an attractive price. In many cases, the container is immediately available from stock. THE NET PRICE IS ONLY 3890 EUROS. Europe-wide transport is possible – we will gladly prepare an individual offer for you including delivery. TECHNICAL DATA • External dimensions: 2.20 m width × 1.20 m depth × 2.30 m height • Weight: approx. 340 kg • Robust steel frame in reinforced design • Wall and roof panels made of 50 mm sandwich panels • PU rigid foam insulation • Exterior cladding made of galvanized sheet steel • Interior cladding made of galvanized sheet steel • PVC flooring • Complete water, wastewater, and electrical installation • Water connection on the rear wall • Wastewater connection on the rear wall • External 230V connection • Natural ventilation EQUIPMENT WC CABIN • Lockable door with cylinder lock • WC compact unit • Washbasin with single-lever mixer • Toilet paper holder • Mirror • LED ceiling lighting • Socket • Ventilation grille EQUIPMENT SHOWER CABIN • Lockable door with cylinder lock • Shower tray • Shower faucet with hand shower • Ceiling lighting • Ventilation system OPTIONALLY AVAILABLE • Hot water boiler • Electric fan heater • Individual equipment according to customer requirements YOUR ADVANTAGES ✓ Directly from the manufacturer ✓ Robust industrial quality ✓ High-quality thermal insulation ✓ Durable steel construction ✓ Ready for immediate use ✓ Simple installation ✓ Europe-wide delivery possible ✓ Individual adjustments on request ROBUST STEEL CONSTRUCTION The stable steel subframe and the frame system were developed for long-term and intensive use. PRODUCTION ACCORDING TO INDUSTRIAL STANDARD The manufacturing process takes place using modern production equipment and under strict quality controls. INDIVIDUAL SOLUTIONS Our containers can be individually adapted to the requirements of the respective project and the conditions on site. Bdjdpszgtdmofx Apdji ROOF SYSTEM Insulated sandwich panels with PU insulation are used for the roof covering. INSULATION Sandwich panels with PU insulation and mineral wool (Rockwool) are used for the walls. SUPPORT SYSTEM The main structure consists of galvanized C and U profiles. The material thicknesses are determined on the basis of static calculations and according to the later location of the container. MAIN CONSTRUCTION SYSTEM The modular containers from SDS Containers are designed taking into account the climatic conditions of the destination location. DRAINAGE SYSTEM The containers have an integrated drainage system with concealed roof gutters in the upper area of the structure. The rainwater is directed to the corners and drained away via specially developed corner supports. We will gladly advise you personally and prepare a non-binding offer for you. Contact us for further information, delivery times, and transport costs. TRANSPORT SERVICE We work with several transport companies and can therefore offer cost-effective deliveries throughout Germany and within the European Union. For transport, we use vehicles with a tail lift and a manual pallet truck. This allows us to unload the container at any fixed location that is accessible by vehicle.

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Bsdsy Tlzaspfx Apdodi

Condition: new, General information Year of manufacture: 2025 Field of application: Construction Reference number: 2 Weights Empty weight: 500 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-12ton Delivery terms: EXW Bdodpfxjq Ixuns Apdsi Working pressure: 190-210 bar Production country: KR Additional information Please contact Ö. Inalkac for more information ASH-52H is a Mini Scrap/ Metal Shear with hydraulic rotation and double cylinder. This model is suitable for excavator 5~12 ton. ASH-52H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló ножици ψαλίδια nůžky saks tesouras foarfece Schere žirklės ножницы forbici sax

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Bdsdpfjr Ihzisx Apdei Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Year of construction: 2026, condition: new, functionality: fully functional, This robust professional cable stripping machine, model KM1-F, processes electrical cables with diameters ranging from 1 to 70 mm. This model features speed control via a frequency inverter. - The blades are hardened, ensuring they do not dull quickly when stripping armored cables. - The machine has 15 different cable feed entries. - The rollers feature grooves on their beveled surfaces for improved grip on the cables. - The cable is cut from both sides, allowing the copper core to be easily removed. - It is also suitable for stripping rubber and flat cables. - The machine meets all safety requirements. - A comprehensive service manual and user instructions are included. - Maintenance procedures are also detailed in the documentation. Technical specifications: - Power supply: 230 V ~ 50 Hz - Power: 2200 watts with geared drive - Dimensions: 60 cm long x 75 cm wide x 90 cm high - Machine speed: adjustable - Output: Depending on the cable type, between 400 and 1200 kg/day - Weight: 185 kg Bodpfx Aoyfw Egepdsdi - Price includes VAT Spare parts such as blades, drives, bearings, etc., are also available. If desired, we can also perform maintenance on these machines. A machine that is ready for immediate use and easy to operate. If you would like to test it, please bring your own cable.